A Bradford company - serving Los Angeles, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Los Angeles

Dvele Construction Service in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A wide opening with a new beam where the kitchen wall was removed
A garage converted into a guest room and home office
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Los Angeles Homeowners Choose Dvele Construction

We provide independent Dvele construction and remodeling service in Los Angeles. That means we read the panel-and-module drawings, match the factory finishes, and sequence kitchen, bath and roof work around a home that arrived mostly complete. We are not Dvele-authorized, so every scope is quoted from what the structure and substrate actually require, not from a brand playbook. Call (844) 343-6681 and a live person answers, day or night.

Call (844) 343-6681

Dvele prefab homes ask for a different kind of contractor than a stick-built bungalow does. The panels are finished. The junctions are the weak point. Get those two facts straight and Los Angeles construction on these homes goes smoothly.

Why Trust Bradford Remodeling Co Los Angeles for Your Dvele Construction?

A second-story addition that matches the existing roofline

Our technicians have up to 22 years of experience, and a good share of that time has been spent on prefab and modular housing where the factory did most of the work and the site crew has to finish it cleanly. A Dvele home rewards that experience. The wall panels are factory-finished, so the rough-in for a new vanity or a range hood has to be planned before anything gets opened. The modules are set and sealed, so plumbing and electrical changes run through designed chases, not wherever a sawzall lands.

We work with OEM-compatible parts and finish-matched materials wherever we can source them, and we say plainly when the factory line is back-ordered or discontinued so you can weigh the wait against an edge-matched alternative. On warranty: we do not void your Dvele warranty. We document what we open, how we close it, and photograph the junctions and chases before and after, so the record is clean if Dvele ever asks about the work. Every price is written before a tool comes out, and every completed project carries the 365-Day Done Right Promise. If the work fails inside that year, we return and correct it at no charge.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Dvele Construction Problems We Fix in Los Angeles

These are the Dvele issues we see most in Los Angeles, and the reasons behind each one.

  • Moisture intrusion at module-to-module and roof-to-wall junctions. Sealant and flashing age faster than the panels they protect. In Los Angeles the long dry summer bakes that sealant, then the first heavy winter rain finds the gap. Water shows up as staining on the ceiling near a roofline or a soft spot at the seam.
  • Settlement and hairline cracking at module seams. Two modules that were married on site move a little differently as the ground shifts. Expansive clay soil across much of Los Angeles makes that movement more common than flatland owners expect. It shows up as popped drywall tape and out-of-plane tile at kitchen and bath backsplashes.
  • Factory-finished panel surfaces that resist standard patching. Drywall mud and off-the-shelf paint do not blend into a factory panel finish. Cabinetry, countertop and shower retrofits need edge-matched materials or the patch reads as a patch.
  • Roofing penetrations and gutter runs on low-slope or seam-heavy assemblies. Dvele roof assemblies can be low-slope or seam-heavy. Water ponds and backs up in winter rain, and a single failed penetration can wet the panel substrate under it.
  • Chase and penetration conflicts during kitchen and bath upgrades. Adding a walk-in shower or a relocated range means new plumbing and venting through factory chases. Cut without reading the drawings and you open a panel you cannot easily seal again.

A Dvele owner usually calls after noticing a soft spot or staining where two modules meet at the roofline, or a hairline crack that keeps reopening along a seam. The typical cause is aged sealant and flashing at the junction plus normal settlement, not a structural failure. A qualified local pro opens the junction, checks the panel substrate, re-flashes and seals it, then repairs interior drywall and finish so the seam disappears. The same pro confirms the kitchen and bath backsplashes and tile aren’t harboring the same movement, because a seam that cracks in the ceiling often has a twin behind the backsplash.

Dvele Parts & Our Repair-vs-Replace Approach

A project lead and homeowner reviewing plans in a room under renovation

We match Dvele’s factory panel finishes and millwork profiles first. That is the right call on almost every job, because a matched edge keeps the home reading as original. Where the factory line is discontinued or back-ordered, we move to quality aftermarket cabinetry, quartz and fixtures with the same dimensions and an edge-matched finish. We don’t claim to stock Dvele parts locally. Each job gets sourced to its scope, and the lead time goes in the written quote.

Repair versus replace comes down to the substrate. On junction and roof defects, targeted repair is usually right: open it, check the panel substrate, re-flash, seal, and close. Full replacement only makes sense when the panel substrate itself is compromised, and we say so in writing with the reason. Call (844) 343-6681 for an exact quote. Estimates are free, and the written price doesn’t move at the door.

Our Dvele Service Process – Step by Step

  1. 1
    Diagnosis. We read the Dvele drawings, inspect the junctions and chases, and probe the panel substrate at any wet or cracked area. We photograph the seam and note whether the movement is settlement, moisture, or both.
  2. 2
    Written scope and price. You get a line-item price before work starts, including what we’ll do if we open the substrate and find more than expected.
  3. 3
    Repair or install. Finish-matched panel repairs, edge-matched cabinetry and countertops, re-flashed junctions, and showers framed to the module dimensions. Factory finishes are protected and re-finished, not painted over.
  4. 4
    Test. Junction repairs get a water test before close-up. Showers get a flood test. Plumbing and venting get checked against the drawings.
  5. 5
    Warranty and close. Clean site, documented scope, and the 365-Day Done Right Promise signed and in your hand.

Dvele Products We Service & Install in Los Angeles

We work across the Dvele product families: single-family modular homes, multi-module two-story residences, accessory dwelling and small-footprint units, and off-grid or solar-ready home packages. On those homes we handle full kitchen remodeling, full bathroom remodeling, and roof replacement and installation, plus the finish and junction work that ties a remodel back into the factory shell. The factory warranty on the structure stays with Dvele. Everything we install carries our own written guarantee.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

We Also Service These Brands

Bradford Remodeling Co Los Angeles is not tied to one brand. We install KraftMaid, Cambria, Silestone, Kohler and a documented roster of other premium names, so a Dvele kitchen can take KraftMaid cabinetry and a Cambria counter, and a Dvele bath can take Kohler fixtures without a sourcing headache. Multi-brand capability means the spec follows what fits the home.

Dvele Construction Pricing in Los Angeles

Footing forms with tied rebar for a home addition

These ranges reflect Los Angeles labor and material costs for the Dvele work we do most. Your written quote will land inside the range that fits your scope, with the substrate condition accounted for.

Service Price Range (Los Angeles)
Kitchen Remodel $16,520 – $53,100
Bathroom Remodel $10,620 – $33,040
Walk-In Shower Installation $5,310 – $14,160
Cabinet Installation $4,720 – $15,340
Countertop Installation $2,360 – $7,670
Roof Replacement $9,440 – $23,600
Roof Repair $470 – $2,125

Call (844) 343-6681 for an exact quote. Estimates are free.

FAQs – Dvele Construction Service in Los Angeles

Book Your Dvele Service in Los Angeles, CA

Dvele homes reward a contractor who reads the drawings and respects the factory finish. We do both, put the price in writing before work starts, and back the result with the 365-Day Done Right Promise. Call (844) 343-6681 for your free estimate. A live person answers, day or night.

Written by the team at Bradford Remodeling Co Los Angeles.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
An open living space after a whole-home remodelA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplaceAn open kitchen and dining area after a remodelA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet bar

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch