







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Florence-Graham, CA
We provide independent Dvele construction and service work across Florence-Graham, CA, from ADU builds and home additions to roof repair on existing modular units. The one thing that sets our Dvele work here apart: Florence-Graham is unincorporated LA County, so every Dvele project runs through LA County Public Works and Building & Safety, and on these tight infill lots the permit and staging paperwork matters as much as the build itself. Call (844) 343-6681 for a free estimate.
We are not Dvele. We don’t claim any affiliation with the manufacturer, and we’re not an authorized dealer. What we are is a local contractor with deep working knowledge of how Dvele’s panelized and modular systems actually go together. Our technicians have up to 22 years of experience. That experience spans Dvele’s specific assembly details, finish tolerances, and how those systems tie into site-built components. If you own a Dvele home and need work done, Dvele service is what we do.
Why Florence-Graham Residents Choose Us for Dvele Service

Dvele homes are not commodity construction, and they don’t tolerate commodity contractors. Every panel, seal, and flashing detail connects to the next, and a crew that treats a Dvele unit like a standard stucco house will create problems down the line. We know the Lōkahi series, the Kōkua series, the 2-Story series, and the ADU series, and we understand where each one tends to need attention.
We also know Florence-Graham. This is a community of small-lot single-family homes and low-rise multifamily where construction happens on tight infill lots with driveway-to-driveway setbacks and alley rear access. That changes how a Dvele job gets planned. Materials arrive on a specific schedule. Staging space is what the lot gives you, and no more. Hauling runs through the alley, not the front yard. We build those constraints into the schedule before a single delivery truck shows up.
Parts come in two tiers. OEM Dvele components for critical structural and weather-sealing parts, so system integrity stays intact. High-quality aftermarket equivalents for standard finishes and hardware when they meet or exceed the specification. We don’t claim to stock Dvele parts in Florence-Graham. We source per job, based on what the unit actually needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Florence-Graham
- Panel joint separation and water intrusion at seams. Thermal movement across hot, dry summers opens hairline gaps where panels meet, and stucco on a tight Florence-Graham lot has little overhang to shed water. Once a seam opens, the next winter rain finds it.
- Premature weathering of exterior finishes. Chronic drought and hard UV break down paint and sealants faster than most manufacturers expect. Flaking paint around windows and doors is often the first visible sign, and it lets moisture in behind the finish.
- Foundation settling on expansive clay soils. That’s the story across much of unincorporated LA County, and Florence-Graham sits on it. Uneven floors and drywall cracks in a Dvele modular unit usually trace back to movement in the soil, not to the modules themselves.
- Roof flashing failures at low-slope transitions. Winter rains are unkind to flat and low-slope roofs, especially where Dvele’s standard details meet a site-built addition or detached garage. That junction is where leaks start.
- Finish tolerance drift after multiple seasons. Doors that no longer sit square, trim gaps that weren’t there at install. These are minor until they aren’t, and they’re often a symptom of the panel movement above rather than a separate problem.
Dvele Service in Florence-Graham: What Local Conditions Mean for Your Equipment
Florence-Graham’s unincorporated status does more to shape a Dvele project than any single climate factor. Every permit, inspection, and code enforcement action runs through LA County Public Works and Building & Safety, not the City of Los Angeles. That distinction trips up contractors used to working just across the line, and it matters most for modular work. County reviewers commonly ask for additional setback and staging documentation for modular deliveries, particularly on the near-edge lots along the Florence-Graham boundary where setbacks are already thin. A Dvele modular deliverable is wide, and a lot with a single-car-wide alley behind it needs a documented plan for where the truck parks, where panels stage, and how it all comes back out. Get that paperwork wrong and the delivery doesn’t happen. We prepare the staging and setback documentation up front so LA County review moves without a second look at the lot.
Dvele Models & Products We Service in Florence-Graham
We work across the Dvele product families: Lōkahi, Kōkua, the 2-Story series, and the ADU series. Each has its own assembly rhythm and finish tolerances, and each one meets site-built components differently. The Lōkahi and Kōkua series are common targets for the exterior finish and seam work that Florence-Graham’s climate drives. The 2-Story series brings in more complex flashing transitions at floor-and-roof interfaces. The ADU series is a frequent fit on rear-lot garages, where alley access makes delivery and staging a planning exercise in itself.
For any of them, we source OEM Dvele components for structural and weather-sealing parts to preserve system integrity. For standard finishes and hardware, we use aftermarket equivalents where they meet or exceed the original specification. No local stock claims, no guessing. We order to the job.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Florence-Graham

Pricing depends on the scope: a seam re-seal and flashing check runs at the low end, while an ADU build or home addition carries the full weight of design, county permitting, and modular delivery coordination. Roof repair on an existing Dvele unit sits in between, priced by the area involved and the flashing detail required.
| Service | Price Range |
|---|---|
| ADU Construction | $90,000 – $220,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Repair | $400 – $1,800 |
A free estimate includes an on-site assessment of the Dvele assembly, a written scope of what needs attention, and a written price before any work starts. That price doesn’t move once it’s on paper. Every completed project carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. Call (844) 343-6681 to schedule your free estimate in Florence-Graham.
Serving Florence-Graham, CA – Our Local Coverage Area
We serve Florence-Graham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Florence-Graham
Yes. Florence-Graham is unincorporated LA County, so Dvele modular construction permits go through LA County Public Works and Building & Safety, not the City of Los Angeles. County reviewers commonly require additional setback and staging documentation for modular deliveries, especially on tight infill lots. We prepare that documentation as part of every Dvele job. Call (844) 343-6681 for an exact quote on your permit scope.
Water intrusion at Dvele panel seams is repaired by resealing the joints with UV-resistant sealant, verifying flashing and drainage details, and confirming the repair meets county code. The repair itself is not a homeowner job: panels are structural, and probing or resealing the wrong layer can make the intrusion worse. A qualified pro assesses the seals and, if settling is suspected, coordinates with a structural engineer. Call (844) 343-6681 for a written estimate.
Yes, in many cases, but the tight-lot reality of Florence-Graham makes it a logistics problem as much as a construction one. ADU construction on these lots runs $90,000 – $220,000 depending on the Dvele ADU series selected and the site work required. Rear-lot garages with alley access are prime conversion targets, but a single-car-wide alley means material deliveries often require blocking the alley and coordinating with adjacent property owners. We plan that before the first truck arrives. Call (844) 343-6681 for an exact quote.
Flashing failures at low-slope transitions are the most common roofing issue on Dvele homes in Florence-Graham, especially where Dvele standard details meet a site-built addition or detached garage. Winter rains expose old flashing quickly. Roof repair typically runs $400 – $1,800 depending on the extent. We assess the whole transition, not just the visible leak. Call (844) 343-6681 to schedule an inspection.
Foundation settling on expansive clay soils is common in unincorporated LA County, and in Dvele modular units it shows up as uneven floors and drywall cracks. The fix depends on the cause: sometimes it’s moisture management around the foundation, sometimes it’s structural underpinning. We assess the movement before recommending a repair, and we coordinate with a structural engineer when needed. Call (844) 343-6681 for an exact quote.
Service Areas Near Florence-Graham
We work Dvele service across Florence-Graham and out to Westmont, West Athens, Los Angeles, Inglewood, and Culver City. If you’re nearby and want to know whether we cover your block, ask us. The Florence-Graham service area page lays out the neighborhoods we reach.
Book Your Dvele Service in Florence-Graham Today
Dvele work on a tight Florence-Graham lot needs planning before the tools come out. Call (844) 343-6681 for a free estimate. We’ll assess the unit, walk the staging constraints with you, and put the price in writing before anything moves. Estimates are free, and a live person answers the phone 24 hours a day.
Written by the team at Bradford Remodeling Co Los Angeles.












