







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Beverly Hills, CA
We provide independent Dvele construction and remodeling service across Beverly Hills, and the one thing that sets our work apart here is the permit layer: Dvele’s factory-built panel systems only pay off when the assembly details are written to survive Beverly Hills’ own plan-check and hillside review, and that’s the part we plan for before a panel is touched. From a kitchen module reset in the flats to a roof cassette repair above the 90210, we work to the assembly logic Dvele builds to. Call (844) 343-6681 to book a free estimate.
Why Beverly Hills Residents Choose Us for Dvele Service

Dvele homes are rare enough in Southern California that most crews have never handled one. We’ve built our practice around the specific things that make these homes different: panelized structural shells, factory-set MEP chases routed behind the wall cassettes, and seam-and-flashing details that decide whether the envelope stays tight. That depth is what our Dvele service is built on.
We’re an independent service provider. Dvele doesn’t endorse us, authorize us, or sponsor this work – we know these homes because we take them apart and put them back together, not because a manufacturer sent us a certificate. We can tell you what a panel joint is supposed to feel like, which sealants hold at the cassette interface, and when a flashing profile needs to be re-set rather than patched.
Beverly Hills homeowners don’t want to hear a list of excuses about a factory-built system. They want a written scope, a written price, and a number to call when something fails. That’s how we run every Dvele job in Beverly Hills.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Beverly Hills
The failure modes on a Dvele home aren’t the same as on a stick-built one. These are the ones we see most in Beverly Hills:
- Panel-to-panel joints wicking moisture on hillside lots north of Sunset. Santa Ana wind-driven rain pushes hard against the envelope, and a cassette seam that was sealed perfectly on a flat site can lose its sealant once it’s exposed to slope, wind, and year-round sun. You see it first as staining on the exterior face, then as drywall efflorescence inside. Sealing to spec, not to whatever tube is on the truck, matters here.
- Factory-set roof cassette flashing that ignores parapets and block-joint adjacency. In the flats south of Santa Monica Blvd, rebuilds often sit against a masonry block wall or a parapet, and a flashing detail set for a clean edge won’t shed water correctly. That’s where ponding and step-flashing leaks start.
- Factory-finished cabinets and countertops installed before MEP trim-out. When the casework goes in ahead of final plumbing and electrical adjustments, the cabinet frames and finishes have no room to absorb the change. Panel damage on a factory-finished door is not a cheap fix.
- Window rough-ins out of plane on sloped, graded lots. A Dvele window cassette that sat flat in the factory can sit proud once the wall lands on a graded hillside lot, which complicates impact-rated glazing swaps and lets water sit at the sill.
- Roof cassette leaks showing up after a windy rain event. The complaint is usually a damp patch at an interior wall or a ceiling stain near a panel joint, not a dramatic collapse. The cause is almost always a cassette seam that was set for a level site and doesn’t account for the slope and wind exposure.
Dvele Service in Beverly Hills: What Local Conditions Mean for Your Equipment

Beverly Hills runs its own building department and its own design review, and nowhere does that bite harder than on hillside view-protection rules. The rule most Dvele owners here don’t learn until it matters: a panel change that alters roofline or massing – including a panelized addition – triggers a view-protection review when a neighbor objects, and that review can hold plan-check for months before framing ever begins. The flat-lot neighbors in the rest of LA never see this cycle. In the 90210 specifically, a second-story addition on a sloped street is as much a legal question as a structural one, because the neighbor’s sightline to the canyon or the basin is a protected interest the city takes seriously.
That means a Dvele panel assembly you could spec in a week elsewhere in LA County may need to be redesigned, re-engineered, or re-sequenced before a single cassette is set. We plan the massing question before the material question, and we write the design-review narrative into the scope. It’s slower. It’s how you avoid tearing a new assembly apart.
Dvele Models & Products We Service in Beverly Hills
We work on Dvele’s modular single-family home panels (the factory-built wall and floor cassettes), Dvele prefabricated roof cassettes and integrated roof panel assemblies, Dvele kitchen and bath module packages (factory-finished cabinetry and fixture sets), and Dvele panelized exterior envelope assemblies with factory-installed cladding and window rough-ins.
Where a part is obtainable, we use Dvele-specified sealants, flashing profiles, and panel fasteners at the joints and envelope. That’s deliberate. Aftermarket substitutions at panel seams are the single most common cause of repeat leaks. Interior trim, cabinetry, and fixtures we source from quality aftermarket lines – KraftMaid and Wellborn cabinets, Cambria and Caesarstone surfaces, Kohler and Moen fixtures – because the honest call on those is to buy from a line with documented specs. We don’t claim to hold local stock; parts are ordered to each job.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Beverly Hills

Prices below are what these jobs typically run in the Los Angeles market. Every job gets a written price before work starts – no number that moves at the door.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Roof Repair | $400 – $1,800 |
| Home Addition | $45,000 – $130,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
What drives the number on a Dvele job is the envelope work – tracing a leak, re-flashing a cassette, re-sealing a joint, and confirming drainage away from the foundation – plus the design-review and plan-check hours a Beverly Hills addition demands. A kitchen remodel on a Dvele module is usually simpler because the rough-in is already set. A free estimate includes the scope written out, the price in writing, and a look at the joint or flashing detail in question. Call (844) 343-6681 when you’re ready to price it.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Beverly Hills
Yes, but only if the massing is redesigned to answer the view-protection rules in the hillside review, and that work has to happen before plan-check. A panel addition that copies the original roofline passes far more easily than one that adds height or a new mass. Call (844) 343-6681 to talk through the design-review path before you commit to an addition.
Usually because a factory roof cassette seam or flashing detail was set for a level site and doesn’t fully account for the slope, grading, and wind exposure of the hillside. Wind-driven rain finds the weak seam, and you see the stain inside. A qualified independent pro traces the joint inside and out, re-flashes or re-seals the cassette to the Dvele assembly spec, and confirms drainage moves away from the foundation. Call (844) 343-6681 – the roof repair range is typically $400 – $1,800.
Not for everything, and not always. At panel joints, envelope seams, and flashing, you should use Dvele-specified sealants, profiles, and fasteners wherever they’re obtainable, because aftermarket substitutions there are the top cause of repeat leaks. For cabinets, countertops, trim, and fixtures, quality aftermarket lines like KraftMaid or Cambria are the right call. Call (844) 343-6681 to price a joint repair or an interior remodel.
Yes, and usually easier than a full addition. A kitchen that stays inside the existing footprint and doesn’t change the envelope generally moves through plan-check faster. The typical kitchen remodel range is $14,000 – $45,000, cabinet installation $4,000 – $13,000, countertop installation $2,000 – $6,500. Call (844) 343-6681 for an exact quote – estimates are free.
Not necessarily. A rough-in that sits proud or out of plane on a graded lot is usually an envelope-and-flashing problem, not a structural one – unless the panel itself has lost integrity, which we’d check. Left alone, it lets water in at the sill and makes an impact-rated glazing swap expensive. Call (844) 343-6681 to have it looked at before the next rain.
Service Areas Near Beverly Hills
We serve Dvele owners throughout Beverly Hills and the surrounding area, including the neighborhoods around Culver City, West Hollywood, View Park-Windsor Hills, Inglewood, and the adjacent parts of Los Angeles. If your home sits on a hillside lot or in one of the flat-lot estate blocks, we cover it.
Book Your Dvele Service in Beverly Hills Today
Whether it’s a joint leak after the last Santa Ana, a kitchen module reset, or a panelized addition you’re trying to get through design review, start with a written scope and a written price. Our technicians have up to 22 years of experience, and every completed project carries the 365-Day Done Right Promise. Call (844) 343-6681 for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles.












