







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterKitchen Cabinet Refacing Cost in Los Angeles: What the Box Actually Determines
Cabinet refacing in Los Angeles typically runs somewhere inside a full kitchen project budget of $16,520-$53,100, but the honest answer is that refacing alone costs far less than that – and the real variable isn’t linear footage, it’s whether your existing cabinet box is worth saving. In a 1928 Craftsman in Mid-City, the answer is often no. In a 1972 Valley tract home, it’s usually yes. That single structural decision swings the number more than any finish or door style you pick. Call (844) 343-6681 for a free written estimate; the price we quote is scoped after a physical inspection, not read off a phone chart.
Key Takeaways
- Refacing on a substrate-ready postwar box is the low-cost path; refacing on pre-war solid fir or redwood carcasses needs extra prep or gets disqualified outright.
- When refacing climbs past 60-70% of the cost of new boxes, replacing with KraftMaid or Wellborn cabinetry becomes the defensible choice.
- Pre-1950 kitchens often hide knob-and-tube wiring or galvanized supply lines once doors come off. Correcting that is a rough-in cost, not a cosmetic one.
- Refacing alone is typically exempt from LADBS plan-check. Move the sink or add a peninsula and you’ve entered permit territory.

Why a Mid-City Bungalow and a Valley Tract Home Cost Different
Walk into a 1972 stucco tract home in Reseda and you’ll find cabinet boxes built from MDF or particleboard – flat sheet-goods, dimensionally stable, and a clean bonding surface for modern thermofoil or RTF veneer. Strip the doors, prep the face frame, and the refacing goes on predictably. That’s a straightforward job.
Walk into a 1928 Spanish Colonial off Adams in Mid-City or a Craftsman bungalow in the Eastside and the carcasses are fir or redwood framing, often face-nailed, frequently out of square by an inch or more. Modern veneer doesn’t bond cleanly to that old resinous wood, and the frames themselves may not be plumb enough for the new doors to sit flush. A refacer who quotes you per linear foot over the phone hasn’t seen any of this yet.
The gap in real per-linear-foot pricing in the Los Angeles market:
| Scenario | Per-linear-foot range | What drives it |
|---|---|---|
| Substrate-ready postwar box (MDF/particleboard, plumb) | $90-$150 | Standard veneer, new doors, hardware |
| Mid-century box with minor repair | $130-$200 | Squaring, patching, edge banding |
| Pre-war solid-wood carcass (fir/redwood) | $180-$280 or disqualified | Substrate prep, bonding failure risk, frame shimming |
| Full replacement (new KraftMaid / Wellborn boxes) | Priced per project | New carcasses, layout flexibility, rough-in exposure |
Read those ranges against your kitchen’s linear footage and you’ll see quickly which side of the line you’re on. A 20-foot galley in a postwar box is a different conversation than a 24-foot run in a pre-war bungalow.
The Break-Even: When Replacement Wins on the Numbers
Refacing stops making mathematical sense once it climbs above 60-70% of the cost of full replacement. Run the per-linear-foot numbers and you’ll hit that wall faster than most homeowners expect in older Los Angeles housing stock. A 24-foot pre-war run at $250/foot lands near $6,000 just for the veneer work – before substrate correction, before any rough-in. At that point the case for new KraftMaid or Wellborn boxes, with their manufacturer specs and own warranties behind our install, becomes defensible on more than gut feel.
That’s the number most refacing quotes never surface. A per-linear-foot estimate that ignores box condition is quoting you the easy half of the job. Our written upfront price is scoped after a physical inspection of the box – measuring plumb, checking the face frame for rot and separation, confirming the substrate will actually hold veneer – so the number on the contract accounts for what’s really behind those doors. That’s The Garrison Standard in practice: the price doesn’t move once tools come out.
For the full scope of what a kitchen build involves when you cross the threshold into replacement, see our Kitchen Remodeling page.

Hidden Cost Drivers Los Angeles Homeowners Hit Mid-Job
The expensive surprises in these projects aren’t cosmetic. They’re the systems hiding behind the cabinet box.
- Knob-and-tube wiring. Common in pre-1950 kitchens. Once doors come off and the box is exposed, an electrician may find ungrounded knob-and-tube feeding an outlet or two. Bringing it to current code is a rough-in cost that has to be corrected before any finish work proceeds.
- Galvanized supply lines. Old steel pipes feeding the sink are often corroded and undersized. If you’re already in the wall, replacing them is cheaper than a repeat visit later.
- Out-of-square framing. Pre-war carcasses rarely sit plumb. Shimming and re-leveling adds labor a per-foot quote never included.
- Seismic and soft-story considerations. Los Angeles construction is a collision of very old residential fabric on an active seismic zone, and every project here is really a seismic, hillside-grading, or soft-story conversation wrapped in an LADBS plan-check timeline. If your refacing touches a structural wall in a soft-story building, that conversation starts.
- Hillside and Chapter 7A requirements. In the Hollywood Hills and the Valley fringe, WUI and Chapter 7A requirements can reach into exterior-adjacent work, though refacing itself stays interior.
None of these appear on a phone estimate. All of them appear on ours, in writing, before the first door comes off.
The Permitting Line Most Refacing Quotes Skip
Cabinet refacing alone is typically exempt from LADBS plan-check – it’s cosmetic. But the moment the project touches layout, you’ve crossed into permit territory. Move the sink and you’ve got a plumbing rough-in that needs inspection. Add a peninsula and you’re altering egress and layout, which is a plan-check conversation. That line matters in Los Angeles because the LADBS timeline is measured in months, not days. A homeowner who doesn’t know where the line sits can get surprised mid-project. We tell you before the price is written which side of that line your job is on.
How Bradford Remodeling Co Los Angeles Runs a Refacing Job
We’re a member of the Garrison Partners family, part of it since 2004, and we operate as an independently owned and operated business held to The Garrison Standard. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed – you know exactly who’s walking through your door before the crew arrives. A live person answers the phone 24 hours a day, seven days a week, not a voicemail queue.
For the kitchen specifically, we work with a documented roster of name-brand materials so specifications are traceable: KraftMaid and Wellborn cabinetry, Cambria and Caesarstone surfaces, Kohler and Moen fixtures. When a refacing crosses into replacement, that documented brand set means the manufacturer’s warranty sits behind our install – and our install sits behind the 365-Day Done Right Promise. If the work fails within a full year, we come back and correct it at no charge. That’s the whole guarantee, in writing, in your hand at job close along with a clean site and a documented scope.
If your project reaches beyond the kitchen – a home where the kitchen refacing is one piece of a larger remodel – we handle that scope too.
FAQs
Refacing in Los Angeles runs roughly $90-$150 per linear foot on a substrate-ready postwar box with MDF or particleboard carcasses, and $180-$280 or disqualified on pre-war solid fir or redwood carcasses that need extra substrate prep. A 20-foot postwar galley typically lands in the low thousands for the refacing alone; the swings come from box condition and any hidden rough-in. Call (844) 343-6681 for a written estimate scoped after a physical inspection – estimates are free.
Repair or refacing is cheaper when your cabinets sit at or below 60-70% of full replacement cost. Above that threshold, replacing with new KraftMaid or Wellborn boxes is the defensible choice – you get new carcasses, layout flexibility, and manufacturer warranties that a veneer job can’t match. In pre-1950 housing stock, refacing frequently crosses that line because the original carcasses aren’t sheet-goods and don’t bond cleanly. Call (844) 343-6681 and we’ll tell you honestly which side your job is on.
Cabinet refacing alone is typically exempt from LADBS plan-check. But if your project touches the layout – moving a sink, adding a peninsula, relocating a range – it enters permit territory, and the LADBS timeline is measured in months. Knowing which side of that line you’re on before work starts is part of the scope we write before the price. Call (844) 343-6681 for a free estimate.
No – a same-day refacing job isn’t something we’d put our name on, and that’s the honest answer. Refacing on a substrate-ready box typically takes two to four days; pre-war carcasses needing substrate prep take longer. What we can promise is a written price before any work starts and a live person on the phone 24/7. Call (844) 343-6681 to schedule a free inspection.
Get a Written Price Before You Decide
Refacing or replacing, the number should be in writing before a single tool comes out. Bradford Remodeling Co Los Angeles scopes your kitchen after a physical inspection of the box, quotes a firm written price, and backs the finished work with the 365-Day Done Right Promise. Call (844) 343-6681 today for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles, CA.
What Our Customers Say
"Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P."Respectful crew. Covered the floors and swept every day."
- Jackie T."Kitchen remodel run by a veteran-owned crew. They started on the day promised, kept the site clean, and gave weekly updates. New cabinets and counters look great."
- Alan M.












