







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Los Angeles, CA
Cabinet installation in Los Angeles typically runs $6,500 to $16,000 for a full run of new semi-custom cabinets, while refacing an existing box averages $2,800 to $7,200 depending on door count and material. Refacing keeps your current layout and replaces the doors, drawer fronts, and veneer; installation replaces the boxes themselves. We do both, and we tell you which one your kitchen actually needs before any money changes hands.
Bradford Remodeling Co Los Angeles is the cabinet contractor for homeowners who’ve been burned before. You get a written price before work starts, background-checked uniformed technicians on the job, and the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. Call (844) 343-6681 and a live person picks up, any hour. For the wider scope this fits into, see our Kitchen Remodeling page and the full Kitchen Remodeling in Los Angeles guide.
Key Takeaways
- Refacing costs roughly 40-60% less than full cabinet replacement in the Los Angeles market.
- We put the cabinet spec and the price in writing before demolition or delivery.
- Every install carries the 365-Day Done Right Promise, in writing, in your hand at close.
- Cabinetry is available in KraftMaid and Wellborn lines with documented manufacturer specs.
- We’re part of the Garrison Partners family, operating under The Garrison Standard since 2004.

When You Need Cabinet Installation & Refacing
Cabinet problems in Los Angeles homes usually show up in patterns we recognize by neighborhood. Older housing stock in areas like Highland Park and Echo Park has original 1920s and 1930s cabinetry that’s been painted over five times and has doors that no longer sit square. Mid-century tracts in the San Fernando Valley have particleboard boxes that swelled during a past leak and never recovered. Newer condos downtown have builder-grade cabinets that look fine until you load them with dishes.
Here’s when it’s time to call:
- Doors that won’t stay closed or sit flush. Sagging hinges and warped doors usually mean the box itself has shifted. If the cabinet is still structurally sound, refacing fixes the look at a fraction of the cost.
- Swollen or crumbling box panels. Water damage under a sink or behind a dishwasher rots the substrate – the structural board under the finish. Once the box is soft, refacing won’t hold screws. That’s an install job.
- A layout that fights you. You reach past an open dishwasher door every night, or the corner cabinet is a black hole. Refacing keeps the layout; installation lets us fix it while the boxes are out.
- Outdated style you’ve lived with long enough. Honey oak or 1990s thermofoil in a house you’re staying in. Refacing is the fastest route to a current look without touching the countertop or flooring.
- You’re prepping to sell in Los Angeles. Buyers here read cabinets as a signal of the whole house. Refacing a tired kitchen is faster and brings the listing photos up to the standard buyers expect.
- The boxes are fine but the finish is peeling. Thermafoil and laminate peeling off clean boxes is a refacing candidate. We check the substrate before recommending it.
Our Cabinet Installation & Refacing Process
We run cabinets the same way we run every job: measured, priced in writing, and closed out clean. Here’s the sequence.
- On-site measure and box inspection. We check every cabinet box for square, water damage, and fastener integrity. This is where we decide refacing versus replacement, and we show you what we’re seeing. A measurement that’s off by a quarter inch on a refacing job shows up as uneven reveals on every door.
- Written price and cabinet spec. You get a line-item price and the exact cabinet line, door style, and finish in writing before any work starts. No numbers that move at the door. If you’re choosing between KraftMaid and Wellborn, this is where the spec gets locked.
- Ordering and staged delivery. Cabinets get ordered to the confirmed spec. For full installs, we schedule delivery so boxes don’t sit in your living room for two weeks.
- Demo and substrate prep. Old cabinets and countertops come out, and we check what’s behind them – wall condition, plumbing rough-in (the stubbed pipe connections for your sink and dishwasher), and electrical. In older Los Angeles homes this step routinely turns up surprises, and we price those in writing before moving forward, not after.
- Installation. Boxes get leveled and shimmed to the wall, fastened to studs, and set square. Doors, drawers, and hardware go on later. We align every door and set every drawer slide to run smooth before we call it done.
- Close-out and written guarantee. We clean the site, walk you through the finished work, and hand you your signed 365-Day Done Right Promise. If a door sags or a hinge fails within the year, we come back and fix it at no charge.
Refacing follows the same discipline with fewer steps: we remove doors and drawer fronts, apply veneer to the exposed box faces, install new doors and hardware, and finish with the same site cleanup and guarantee. The boxes stay put, so there’s no countertop removal and no plumbing disruption.

Cabinet Installation & Refacing Pricing in Los Angeles
Cabinet pricing in Los Angeles is driven by door count, material, and whether the boxes stay. Here are honest ranges for this market. Your written price comes first, and it doesn’t change unless the scope does.
| Scope | Typical Range | What Drives It |
|---|---|---|
| Refacing, standard door count | $2,800 – $5,500 | Door style, veneer material, hardware |
| Refacing, large kitchen or premium doors | $5,500 – $7,200 | Custom door profiles, soft-close hardware |
| Full cabinet install, semi-custom | $6,500 – $12,000 | Layout, cabinet line, box count |
| Full cabinet install, premium lines | $12,000 – $16,000+ | KraftMaid or Wellborn premium series, custom sizing |
| Hardware and soft-close upgrade | $400 – $1,200 | Pulls, hinges, drawer slides, door count |
| Substrate repair (water damage) | $500 – $2,500 | Extent of rot, wall repair, drying |
What moves the number most is the boxes. Refacing saves money because the existing boxes stay in place and the countertop doesn’t come off. Full installation costs more because you’re paying for new boxes, demo, substrate work, and re-setting countertops and plumbing. If the boxes are sound, refacing gets you a current look for roughly half. If the substrate fails or the layout needs to change, installation is the honest answer.
Cabinetry quality follows the spec. We work with a documented roster of name-brand lines including KraftMaid and Wellborn, so every cabinet carries manufacturer specifications and warranties that back our own guarantee. You’ll know the exact line before you sign. Call (844) 343-6681 for a free estimate; the written price comes before any work starts, every time.
FAQs – Cabinet Installation & Refacing
How much does cabinet refacing cost in Los Angeles?
Cabinet refacing in Los Angeles typically costs $2,800 to $7,200 depending on door count and door material. A standard kitchen with a moderate number of doors lands in the lower half; large kitchens or premium custom doors push toward the top. We give you the exact written number at the on-site measure, and it doesn’t move unless the scope does. Call (844) 343-6681 for a free estimate.
Is it cheaper to reface or replace cabinets in Los Angeles?
Refacing is cheaper, usually by 40-60%, when the existing boxes are structurally sound. Replacing cabinets costs more because you’re paying for new boxes, demolition, substrate repair, and re-setting countertops and plumbing. Our technicians, who have up to 22 years of experience, inspect every box before recommending which path is right for your kitchen. Call (844) 343-6681 to get an honest comparison in writing.
Can you install cabinets in my Los Angeles condo or older home?
Yes. We install cabinets in condos, single-family homes, and older Los Angeles housing stock, including the 1920s and 1930s homes where wall condition and plumbing often need attention during demo. We check substrate and rough-in before ordering so surprises get priced in writing, not sprung on you. Call (844) 343-6681 for a free on-site estimate.
What does the 365-Day Done Right Promise cover on cabinets?
The 365-Day Done Right Promise covers the work for a full year after completion: if a door sags, a hinge fails, a drawer slide runs rough, or any part of the install doesn’t hold, we return and correct it at no charge. You get the signed written guarantee in your hand at close-out. Call (844) 343-6681 and a live person answers, any hour.
How long does cabinet installation take in Los Angeles?
Refacing a standard kitchen takes two to four days on site; full cabinet installation takes one to three weeks depending on cabinet delivery timing, substrate repairs, and countertop re-setting. We confirm the schedule in writing before the job starts so you know what to expect. Call (844) 343-6681 for a timeline on your specific kitchen.
If your cabinets are tired, warped, or just dated, the fix doesn’t have to be a gamble. Bradford Remodeling Co Los Angeles puts the spec, the schedule, and the price in writing before a single tool comes out, and backs the finished work with the 365-Day Done Right Promise. A live person answers (844) 343-6681 around the clock. Call today for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles.


