







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Culver City, CA
We provide independent Mr-Glass service across Culver City, CA, working on frameless and semi-frameless shower enclosures and glass-and-aluminum openings. The one thing that makes our Mr-Glass work here different: Culver City issues its own building permits and inspections, so an enclosure change that touches a wall, curb, or shower rough-in gets reviewed by the city’s building department, not LA County’s. Our technicians have up to 22 years of experience, and our projects carry the 365-Day Done Right Promise. Call (844) 343-6681 for a free estimate in Culver City.
Why Culver City Residents Choose Us for Mr-Glass Service

We know the Mr-Glass lines homeowners in Culver City actually own: the frameless pivot and hinged shower units, the semi-frameless sliding systems, and the tempered glass neo-angle enclosures common in older homes. When a door drags, a hinge backs out, or silicone gives way at the curb, we come out, look at the whole opening, and tell you what will hold.
Our advantage is independence. Bradford Remodeling Co Los Angeles is a Mr-Glass service provider, not the manufacturer and not an authorized dealer. We aren’t tied to a dealer account or a factory script, so we source Mr-Glass-compatible hardware and grade the work on how it fits, seals, and passes Culver City’s inspections. We can use specifier-grade OEM hinges, pivots, and sweeps when they’re available, and quality aftermarket parts where they make sense on an older enclosure.
Scheduling is straightforward. We give a written price before any work begins, and a real person answers the phone when you call. For a Culver City bathroom project, that means your estimate and your scope arrive in writing first, with no numbers moving at the door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Culver City
- Hinges and pivots backing out of an out-of-plumb wall. In the 1920s and 1940s bungalows around downtown Culver City, the shower wall is rarely plumb. Screws loosen from the glass or header, the door swings out of alignment, and the edge of the tempered panel takes the stress.
- Failed sweeps and silicone at the curb. Vinyl sweeps and curb seals harden and pull away, and water wicks behind the enclosure. On raised-foundation floors, that water reaches old wood framing and cavity margins close to original knob-and-tube wiring, which is where minor leaks turn expensive.
- Hard-water spotting and mineral etching. Culver City sits in a coastal-influenced climate with real humidity, and uncoated tempered glass collects mineral film fast. Seals also degrade faster across dry Santa Ana wind seasons, so a door that sealed fine in spring can weep by fall.
- Out-of-square rough openings. In Carlson Park and Sunkist Park, tight lots mean tight bathrooms. Plenty of openings are out of square enough that a stock Mr-Glass unit won’t close the gap, and the door needs custom-cut panels and aftermarket hinges to sit true.
- Chips at the hinge point. A chip where the hinge mounts is a structural failure in the glass, not a cosmetic flaw. It can’t be sealed over. That panel gets measured and replaced, because a compromised tempered sheet can let go without warning.
Mr-Glass Service in Culver City: What Local Conditions Mean for Your Equipment

Here’s what most Mr-Glass pages won’t tell you: Culver City runs its own permitting pipeline. Permits and inspections go through the city’s building department rather than LA County’s, and the plan check is more hands-on than the county process most LA-area homeowners expect. That matters the moment a glass-enclosure change removes or alters a wall, a shower curb, or a plumbing rough-in, because those are permitted items here. It also shapes how a job runs in Carlson Park, where a lot of the housing stock dates to the 1920s through 1940s and the bathroom openings show it.
In a typical Culver City job, a homeowner with an aging semi-frameless Mr-Glass enclosure reports a door dragging the curb and water reaching the floor. The usual cause is a hinge plate loosened from a shower wall that was never plumb, plus hardened silicone at the curb. The fix depends on what the opening will allow. A qualified local pro re-sets the hinges and glass with new vinyl sweeps and a proper curb seal. When the panel is chipped at the hinge or the opening is too far out of square to correct, the pro measures for a custom-cut frameless unit and pulls the change through Culver City’s own building department before any tile or rough-in work is opened up. We handle that sequence the same way: the permit gets cleared before the wall comes apart.
Mr-Glass Models & Products We Service in Culver City
Our work covers the main Mr-Glass forms: frameless pivot and hinged shower door enclosures, semi-frameless sliding shower door systems, and tempered glass tub-to-shower and neo-angle enclosure units. Each one fails in its own way, and parts get sourced per job.
We don’t claim local stock of Mr-Glass parts. When a hinge, pivot, handle, or vinyl sweep needs replacing, we identify the exact part your enclosure takes, confirm what’s available from OEM specifier-grade supply or as quality aftermarket, and bring the right hardware to the measured job. We fix the hardware and reseal a sound tempered panel rather than talk you into new glass. We replace the full unit when the glass is chipped at a hinge or the opening is too far out of square to correct. Hard-water film gets treated during the same visit, so the glass you’re keeping reads clean after the reseal.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Culver City

Here’s what Mr-Glass shower work runs in Culver City. These are real ranges, not a request to call for a number.
| Service | Typical range |
|---|---|
| Frameless glass shower enclosure installation | $4,500 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
Several things drive where your number lands: whether the opening is plumb and square, panel size and thickness, the door type, custom-cut versus stock sizing, and whether any wall, curb, or rough-in change pulls a Culver City permit. Our free estimate includes the written scope and a fixed written price before work starts, and the 365-Day Done Right Promise covers the finished job. If the enclosure fails within that year, we come back and correct it at no charge. Call (844) 343-6681 for a free estimate.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Culver City
Do I need a Culver City permit to replace a Mr-Glass shower enclosure? Not always. If you’re swapping a like-size enclosure with no wall, curb, or plumbing change, it’s often a straight replacement you can price today. When the work removes or alters a wall, a curb, or a rough-in, it goes through the Culver City building department for review. We confirm which side of that line your job sits on and pull or pass the permit before the wall comes apart.
Why does my Mr-Glass shower door keep swinging open or dragging? Most of the time it’s worn or loosened hinges and pivots, not a bad door. On older Culver City homes, the shower wall itself is often slightly out of plumb, so the hinge plate works loose and the door drops out of alignment. A pro can re-set the hinges and glass, tighten the pivot, and replace the sweeps to put the door back on track. If the panel is chipped at the hinge, it gets replaced instead.
Will a frameless Mr-Glass enclosure fit a 1920s Carlson Park bathroom? Usually yes, with custom sizing. Many Carlson Park and Sunkist Park bathrooms are narrow and out of square, so a stock unit may not close the gap. The fix is measuring the actual opening and ordering a custom-cut panel with hinges matched to it. That’s routine for a frameless job, and it’s one reason the estimate matters before you buy anything.
What causes water to leak behind my Mr-Glass enclosure onto the floor? Water wicks behind an enclosure when the curb seal or vinyl sweeps fail with age. Hardened silicone and worn sweeps let water track under the frame and onto the floor, and on a raised foundation in Culver City it can reach the framing and nearby wall cavities, so it’s worth fixing early. Call (844) 343-6681 for an assessment. Estimates are free.
Is it cheaper to repair or replace a Mr-Glass shower enclosure? Repair is cheaper when the glass is sound and the hardware just wore out: new hinges, pivots, sweeps, and a fresh curb seal. Replacement makes more sense when the glass is chipped at a hinge or the opening is too far out of square to correct. We price both during the estimate so you can see the difference. Call (844) 343-6681 for a free quote in Culver City.
Service Areas Near Culver City
We serve Culver City and the surrounding neighborhoods, including Los Angeles, View Park-Windsor Hills, Beverly Hills, West Hollywood, and Inglewood. For the broader scope of our Culver City service area, see what we cover, including our Mr-Glass service across the Westside. Neighbors in View Park-Windsor Hills and Beverly Hills get the same written pricing and the same 365-Day Done Right Promise.
Book Your Mr-Glass Service in Culver City Today
If your Mr-Glass enclosure is dragging, leaking, or out of square, we can help. Call (844) 343-6681 to schedule your free estimate in Culver City. A real person answers around the clock, you get a written price before any work starts, and the finished job carries the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Los Angeles.












