







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass window and door service across Los Angeles: diagnosing failed glazing, corroded aluminum frames, worn sash hardware, and sliding-door roller problems, then repairing or replacing the units with the right parts for the job. What makes our Mr-Glass work different is that we treat these windows as repairable assemblies rather than automatic replacements. A fogged pane or a dragging patio door is often a targeted fix, not a five-figure project. We’re a Los Angeles service provider working on Mr-Glass products independently. We have no factory authorization and no dealer agreement with the manufacturer, and we don’t claim otherwise. Call (844) 343-6681 for a free estimate.
Los Angeles owns an unusual share of Mr-Glass aluminum and vinyl units because so much of the local housing stock dates from the 1920s through the 1970s, and owners up and down the Eastside, the Valley, and Koreatown have replaced original wood sashes with aluminum single-hungs and sliding patio doors over the decades. Those units are now hitting the age where seals fail and hardware wears out. We know how they were built, what tends to go first in our climate, and how to source the right parts for each opening.
Why Trust Bradford Remodeling Co Los Angeles for Your Mr-Glass Construction?

Our technicians have up to 22 years of experience, and a fair amount of that has been spent on aluminum and vinyl window assemblies that other crews would rather tear out than troubleshoot. That experience matters on Mr-Glass work because the brand’s value to a homeowner is repairability. The Series 6000 aluminum single-hung, the vinyl double-hungs, and the sliding patio doors are built around replaceable components: glass units, balances, latches, rollers, weatherstripping. Knowing which of those actually failed, and whether the frame around it is still sound, is the whole job.
We work warranty-safe. That means we don’t cut into a frame or modify an opening in a way that would void a manufacturer’s coverage on a unit that’s still within its term, and we tell you plainly when a repair makes sense versus when it doesn’t. We use OEM-compatible parts where OEM isn’t available, match the glass specification to the original unit, and document what we install so you have a record.
Every Mr-Glass project gets a written price before any work starts, and the completed work is covered by our 365-Day Done Right Promise: if the repair or installation fails within a full year of completion, we come back and correct it at no charge. A live person answers the phone, day or night, at (844) 343-6681. We’re part of the Garrison Partners family, and every location is independently owned and operated under The Garrison Standard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Los Angeles
Most of what we get called to on Mr-Glass units falls into a handful of patterns. Here’s what goes wrong, and why:
- Fogged insulated glass on aluminum single-hungs. The Series 6000 aluminum single-hung is the unit we see most often with a failed glazing seal, and the failure clusters on south- and west-facing elevations. That’s not a coincidence. In Los Angeles, the long dry summers and relentless afternoon sun on those exposures cook the sealant around the edge of the insulated glass unit (IGU), and once that perimeter seal breaks, moisture gets between the panes and the glass clouds from the inside. It’s a glass problem, not a frame problem, which is why a single pane can usually be swapped without touching the rest of the window.
- Corrosion and pitting at aluminum sill and frame joints near the coast. Aluminum is durable, but salt air and coastal moisture attack the joints where the sill meets the frame. Over years, that pitting opens a path for water intrusion, and the sash starts sticking or the frame weeps. Homes closer to the marine layer see this faster than inland properties.
- Worn or broken sash balance springs on vinyl double-hungs. The balance is the spring mechanism that holds the sash up when you open it. When it weakens, the sash won’t stay put, and the tilt-latch hardware at the top of the sash often wears alongside it. This is a mechanical wear item, not a sign the window is finished.
- Sliding patio door roller failure and track wear. The rollers under a sliding patio door carry real weight and run on a track that collects grit. When rollers flatten or the track wears, the door drags, jumps, or won’t seat flush against the jamb, and that misalignment lets air and water past the seal.
- Failed awning and fixed-unit weatherstripping. On fixed and awning window units, the gaskets and weatherstripping break down from UV exposure and stop sealing, which shows up as drafts and, in the rare heavy winter rain, as leaks at the frame.
A typical job starts the way most of these do: a homeowner notices a Mr-Glass aluminum single-hung is foggy between the panes and the sash no longer slides smoothly. The usual cause is a failed insulated glass seal combined with corroded or worn sash hardware, often after years of sun exposure. A qualified local pro typically confirms whether the frame and sill are sound, measures the unit for a replacement IGU or full window, and either swaps the sealed unit and hardware or recommends a full-frame replacement if corrosion has compromised the opening.
Mr-Glass Parts & Our Repair-vs-Replace Approach

Parts sourcing is where a lot of Mr-Glass jobs get decided. We use OEM Mr-Glass replacement parts, balances, rollers, latches, and glass, whenever they’re available, and quality aftermarket equivalents when OEM has been discontinued or the cost doesn’t make sense for the repair. We don’t claim to stock parts locally; every part is sourced and matched to your specific unit and opening.
Then we make an honest call on repair versus replace:
- Repair usually wins when it’s a single fogged pane, a sticky sash, a worn balance, a broken latch, or a dragging roller on otherwise sound frames. These are straightforward fixes with good outcomes.
- Replacement usually wins when the frame has structural corrosion, when multiple sealed units in the same elevation have failed at once, or when the sill and joints have lost integrity from long-term water intrusion. Patching a frame that’s already compromised just pushes the problem down the road.
We’ll tell you which side of that line your window falls on before any work starts. Call (844) 343-6681 for a free estimate.
Our Mr-Glass Service Process – Step by Step
Here’s how a Mr-Glass job runs from first look to final sign-off:
- 1
Diagnosis. We identify the unit (Series 6000 aluminum, vinyl double-hung, sliding patio door, fixed or awning), then trace the actual failure: failed IGU seal, balance, latch, roller, track, or frame corrosion. We check the adjacent frame and sill for water damage, not just the symptom you called about.
- 2
Repair or install. For repairs, we swap the failed component, IGU, balance, latch, roller, or weatherstripping, and source the correct OEM or matched aftermarket part. For replacement, we measure the opening, match the glass and frame spec, and install the new unit to fit the existing rough opening.
- 3
Test. We operate the sash or door through its full travel, check the seal for air and water tightness, and confirm the hardware engages cleanly. A patio door should glide and seat flush; a double-hung should hold position at any height.
- 4
Warranty and close. We leave a clean site, hand you the written record of what was done, and stand behind the work under the 365-Day Done Right Promise. If it fails within a year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Los Angeles

We handle the full range of Mr-Glass window and door units common in Los Angeles homes:
- Series 6000 aluminum single-hung windows, glass unit replacement, sash hardware, sill and frame joint repair, weatherstripping.
- Vinyl sliding patio doors, roller and track replacement, alignment, seal and weatherstripping correction.
- Double-hung vinyl windows, balance spring and tilt-latch replacement, sash and frame service.
- Fixed and awning window units, gasket and weatherstripping renewal, glass service.
Beyond repair, this is where our window replacement and impact window installation work comes in: when a unit is past saving or you’re upgrading for wind and debris resilience, we install to the opening and match the surrounding facade. We also handle roof replacement and roof repair for Los Angeles homes, because water intrusion at a window often travels with a roof or flashing problem above it.
We Also Service These Brands
We’re not a single-brand shop. Alongside Mr-Glass, we work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, and Kohler and Moen fixtures, plus exterior lines from GAF, James Hardie, and Therma-Tru. That breadth matters on larger remodels in Los Angeles, where a window upgrade, a kitchen, and an exterior repair often land in the same project. You get one crew and one written price across all of it.
FAQs – Mr-Glass Construction Service in Los Angeles
No. We’re an independent Mr-Glass service provider and are not affiliated with, authorized by, or endorsed by the manufacturer. We work on Mr-Glass products because we know the lines and their failure points, not because we hold a dealer agreement. Call (844) 343-6681 for a free estimate.
Yes, we use OEM Mr-Glass replacement parts whenever they’re available, including balances, rollers, latches, and glass. When OEM parts are discontinued or cost-prohibitive, we use quality aftermarket equivalents matched to your unit, and we tell you which you’re getting before work starts. Call (844) 343-6681 for an exact quote.
Most single-unit repairs, a fogged pane, a worn balance, a patio-door roller swap, finish in a single visit, while full-frame window replacement and multi-unit jobs take longer and depend on the scope and how many openings are involved. We give you a written timeline before any work begins. Call (844) 343-6681 to schedule your free estimate.
We cover the Series 6000 aluminum single-hung, vinyl sliding patio doors, double-hung vinyl windows, and fixed and awning window units, which together make up nearly all the Mr-Glass units we see in Los Angeles. If you’re unsure which line you have, we can identify it at the estimate and tell you whether it’s repairable.
No, properly performed service that uses correct parts and doesn’t modify the frame shouldn’t void your Mr-Glass warranty, and we work to avoid any modification that would void coverage on a unit still within its term. We document what we install so you have a record. Call (844) 343-6681 to talk through your situation.
Cost depends on the work. Here are the ranges we quote in the Los Angeles market:
| Service | Typical Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
| Roof Replacement | $9,440 – $23,600 |
| Roof Repair | $470 – $2,125 |
Single-unit repairs like a fogged pane or a worn balance typically land well below a full replacement, and we quote the exact range before any work starts. Call (844) 343-6681 for an exact quote. Estimates are free.
Book Your Mr-Glass Service in Los Angeles, CA
Whether it’s a foggy Series 6000 single-hung, a patio door that won’t glide, or a full window replacement across your Los Angeles home, we’ll diagnose it honestly and give you a written price before any work starts. Call (844) 343-6681 to schedule your free estimate. A live person answers, day or night.
Written by the team at Bradford Remodeling Co Los Angeles.












