







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Unilock Construction
Bradford Remodeling Co Los Angeles provides independent Unilock paver, wall, and step construction across Los Angeles – correction, re-set, and full installation of Piso, Brussels Block, and Beacon Hill systems. What sets this work apart is base discipline: Unilock blocks are only as good as the aggregate and edge restraint beneath them, and we build to the spec the block asks for. We’re an independent contractor, not affiliated with or endorsed by Unilock. Our technicians have up to 22 years of experience. Call (844) 343-6681 for a free estimate.
Why Trust Bradford Remodeling Co Los Angeles for Your Unilock Construction?

Unilock pavers are a system, not a stack of concrete: the block, the bedding sand, the 4-6 inch aggregate base, the polymeric sand in the joints, and the edge restraint all have to work together. Our technicians work with Unilock Piso, Brussels Block, and Beacon Hill every week, which means we read a failure before we lift a unit. Efflorescence on Piso isn’t a paver defect – it’s moisture migrating up from a base that holds water. Rutting on a Brussels Block driveway is almost always a compaction problem, not a block problem. Knowing the difference is what keeps a repair from becoming a repeat.
Warranty-safe practice matters. We set genuine Unilock pavers when color matching matters, re-set with fresh polymeric sand, spike edge restraint into stable subgrade, and document the base preparation so the manufacturer’s coverage stays intact. Every Unilock project here gets a written price before work starts and the 365-Day Done Right Promise – if the work fails within a year, we return and correct it at no charge. We’re part of the Garrison Partners family, held to The Garrison Standard.
Los Angeles is a permitting city, which shapes how we approach any hardscape job tied to a larger project. A paver driveway that changes the footprint or drainage can draw LADBS plan-check attention, and the process here is slower and more discretionary than almost anywhere in the country. We plan the timeline around that reality rather than around wishful scheduling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Los Angeles
- Efflorescence on Piso pavers. White salt deposits wick up through the dense surface when moisture moves from the base toward the face. In Los Angeles, clay-heavy soils and irrigation overspray keep the base damp longer than it should, so the staining comes back every dry season until drainage is corrected. Cleaning alone treats the symptom.
- Base settlement and rutting. Unilock pavers set on an inadequately compacted aggregate base – under 4 to 6 inches – deflect under vehicle loads. Driveways with poor drainage show it first: the low corner ruts, then the field follows. Our technicians have up to 22 years of experience diagnosing exactly this on Los Angeles driveways.
- Edge restraint failure. Plastic or metal restraints that aren’t spiked into a stable subgrade shift outward, letting the field spread. Joints open, polymeric sand washes out, and the edge becomes a trip hazard. On a Los Angeles patio, this is often the single fastest failure to appear.
- Staining and color fade on Brussels Block. The tumbled, textured surface traps dirt and efflorescence, and some color blends lose contrast after years of UV exposure when they aren’t cleaned and sealed properly. The long, bright Los Angeles dry season accelerates that fade if maintenance is skipped.
- Heaving and spalling at the field edge. Expansive clay soil moves with the wet-dry cycle, and the rare heavy winter rain exposes grading and drainage failures that sat hidden all summer. Pavers at the transition to soil or concrete lift first, then crack.
Unilock Parts & Our Repair-vs-Replace Approach

For Unilock repairs we source genuine Unilock pavers and accessories when color matching matters – replacement units from the same series, edge restraints, and polymeric sand that performs to spec. We use high-quality aftermarket base materials and sealers where they outperform OEM, and we say so plainly when that’s the call.
The repair-or-replace decision is honest, not sales-driven. If only a few pavers are spalling or heaved, we re-set those units and fix the base beneath them. If more than 20 to 30 percent of the field is settled or cracked, repeated spot fixes cost more over time than replacing the affected area once, and we’ll show you the math. We don’t claim local stock – parts are sourced for each job, which keeps the color match right.
Call (844) 343-6681 for a free estimate and a written scope before anything gets pulled up.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We walk the field with you, map the failure pattern, and check base depth, edge restraint, and drainage. You get a written price before any work starts.
- 2
Correction or installation. For repairs, we lift the affected Unilock field, re-compact the subgrade, and rebuild the 4-6 inch aggregate base to spec. For new installs, the same base discipline applies from the first lift.
- 3
Re-set and joint. Genuine Unilock pavers are re-set on fresh bedding sand, edge restraint is spiked into stable subgrade, and joints are filled with polymeric sand and compacted.
- 4
Clean and verify. We test drainage, check the field for lippage, and clean the site. You get the signed 365-Day Done Right Promise in your hand – if the work fails within a year, we return at no charge.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Los Angeles
We work across the Unilock paver, wall, and step families most common in Los Angeles yards. That includes Piso Paver for driveways and patios, Brussels Block for tumbled-texture patios and walkways, and Beacon Hill Paver for structural and decorative walls. We also handle edge restraints, polymeric sand, and finishing details to complete a field. When a homeowner is comparing Unilock against Techo-Bloc, we walk through the real differences in base requirements and maintenance so the choice fits the site. No claim to stock – each job is sourced to the series and color specified.
We Also Service These Brands
Unilock is one line in a broader capability. Bradford Remodeling Co Los Angeles also installs and services KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, alongside GAF and James Hardie exterior products and Belgard hardscaping. That matters when a Unilock patio ties into a larger kitchen or whole-home remodel – one written scope, one documented brand set, one guarantee.
FAQs – Unilock Construction Service in Los Angeles

Is Bradford Remodeling Co Los Angeles authorized by Unilock? No. We’re an independent contractor, not affiliated with or endorsed by Unilock. We work with Unilock products and source genuine materials, but we don’t represent the manufacturer.
Do you use genuine Unilock pavers for repairs? Yes, when color matching matters. We source genuine Unilock pavers, edge restraints, and polymeric sand for repairs, and use high-quality aftermarket base materials and sealers where they perform better. Call (844) 343-6681 for an exact quote – estimates are free.
How long does Unilock service take in Los Angeles? A spot re-set can finish in a day or two; a full driveway rebuild typically runs several days depending on base correction and drainage work. We give you the timeline in writing before work starts.
What Unilock models and series do you cover? Piso Paver, Brussels Block, and Beacon Hill Paver are the lines we see most in Los Angeles, plus the edge restraints and polymeric sand that finish them. Call (844) 343-6681 to confirm your specific series.
Will service void my Unilock warranty? Properly done work with genuine materials and documented base preparation keeps coverage intact. We follow warranty-safe practice and note what we did. Call (844) 343-6681 for a free estimate.
How much does Unilock construction cost in Los Angeles? Paver driveway installation runs $8,260-$21,240; paver patio installation $4,130-$12,980; driveway replacement $5,900-$16,520; and driveway sealing $295-$825. Call (844) 343-6681 for an exact quote – estimates are free.
| Unilock Service | Los Angeles Price Range |
|---|---|
| Paver Driveway Installation | $8,260-$21,240 |
| Paver Patio Installation | $4,130-$12,980 |
| Driveway Replacement | $5,900-$16,520 |
| Driveway Sealing | $295-$825 |
A homeowner notices white chalky stains and loose pavers on a Unilock Piso driveway after a few years. The usual cause is a shallow base holding water against the paver bottoms, plus missing or failed edge restraint. A qualified local pro typically pulls up the affected field, re-compacts the subgrade, adds a proper 4-6 inch aggregate base, re-sets the pavers with fresh polymeric sand, and replaces the edge restraint – then advises on sealing and drainage corrections.
Book Your Unilock Service in Los Angeles, CA
If your Unilock driveway, patio, or wall needs repair or a fresh install, call (844) 343-6681 for a free estimate. We’ll diagnose the base, put the price in writing, and back the work with the 365-Day Done Right Promise. A live person answers the phone, day or night.
Written by the team at Bradford Remodeling Co Los Angeles.












