







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Los Angeles Owner’s Guide
We install Unilock-compatible windows and doors for Los Angeles homeowners, and a typical installed job runs $5,310 to $17,700 for standard window replacement, with impact-rated units from $9,440 to $29,500. Same-day is not how glazing work happens – custom Unilock units and anything impact-rated usually need to be ordered to your rough opening – but we’ll give you a written price before anything starts. Most owners find out something is wrong the same way: a bedroom won’t latch after the Santa Ana winds, a sliding door drags on its track, or a window fogs from the inside and can’t be wiped clear.
Which Unilock Models This Applies To

Unilock ships windows and doors across several product lines – vinyl slider and single-hung units, casement lines, and impact-rated assemblies built for California coastal and inland zones. We don’t claim to stock Unilock parts, and no one carries these on a truck. What matters is matching the exact part to the exact frame: the model and series label is usually etched into the glass corner or printed on the sash body, and your rough opening measurements (the framed hole the unit sits in) tell us the rest. Without both, a replacement sash or roller will be close but wrong, and “close” is how tracks get chewed up.
On the OEM-versus-aftermarket question for Los Angeles specifically: Unilock OEM sashes and hardware match the original tolerances and keep the manufacturer’s warranty intact. A quality aftermarket roller or balance can work fine and costs less, but only if the spec matches – a generic roller rated for a lighter sash will wear a groove in an aluminum track within a couple of summers out here. When we quote, we tell you which is which and what each covers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- Fogging between the panes. The seal in the insulated glass unit (the double-pane sandwich) has failed and moisture is trapped inside. You can’t clean it out – the unit has to be replaced.
- A door or window that won’t latch or square up. Usually a shifted hinge, a worn roller, or a frame that’s moved with the house. In older Los Angeles homes, foundation movement is a common culprit, not the hardware.
- Dragging or grinding sliding doors. The roller or the track has worn. Catch it early and it’s a roller swap; let it go and you’re replacing the track too.
- Drafts and water at the corners after rain. The weatherstripping or the corner seal has broken down. In our climate the sun bakes these seals hard before anything else fails.
- Cracks or chips in the glazing. Impact from debris, settling, or heat stress. A crack in a tempered or impact panel is a safety issue, not a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest range for Los Angeles. Window replacement runs $5,310 to $17,700 installed. Impact window installation, which is what a lot of owners want given the fire and wind exposure here, runs $9,440 to $29,500. The spread is driven by unit count, size, whether we’re matching an existing rough opening or reframing it, and glass spec. Los Angeles pricing also carries the usual permitting and inspection costs that don’t exist in a lot of other markets.
Every price we give is a written line-item quote before any work starts – parts and labor broken out, no numbers that move at the door. The work itself is covered by our 365-Day Done Right Promise: if anything we installed fails inside a full year, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check yourself: clean and lubricate a sliding track, tighten a hinge screw, and read the model label so you know what you’re dealing with. What goes wrong when you push past that: swapping a sealed insulated glass unit requires handling glass under tension, and a panel that cracks in your hands is a genuine hazard. Reframing a rough opening or re-hanging an impact-rated door is not a weekend job. If a window fogs, cracks, or won’t latch, call us at (844) 343-6681 for a free estimate – we’ll tell you whether it’s a repair or a replacement before you spend anything.
FAQs

A well-installed vinyl or impact unit typically holds its seal 15 to 25 years, but the Los Angeles sun and dry heat are hard on weatherstripping and seals, so expect to service those sooner – often within the first decade – even when the glass and frame are fine.
Yes, if the frame and sash are sound, we can often replace just the insulated glass unit rather than the whole window, which costs less. If the frame has warped or the seals around it have failed, a full replacement is the honest answer.
A single window or door swap is usually a few hours; a full-house replacement runs a few days depending on unit count and whether any reframing is needed. We give you the timeline in writing with the price so there are no surprises.
We pull the model and series from the label on your unit, verify it against Unilock’s current specs, and match the glass and hardware to your rough opening. If the exact part isn’t available, we quote the closest spec-matched equivalent and tell you how it differs. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Unilock.
Call (844) 343-6681 for a free estimate. A live person answers around the clock, and we’ll give you a written price before a single tool comes out. We also work with KraftMaid, Cambria, and Silestone on full remodel projects if your window job turns into something bigger.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












