







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Home Additions & ADU: The Los Angeles Owner’s Guide
A Unilock-compatible home addition in Los Angeles typically runs $53,100 to $153,400, and a detached or attached ADU runs $106,200 to $259,600. We install the full Unilock hardscape and structural system that ties the addition to the existing house, and every project gets a written price before work starts. The “part failure” on a Unilock project is almost never a single broken piece. Owners usually find it as a hairline crack running through the paver field after a wet winter, a wall cap that has lifted away from the seat, or a step that has settled a half inch where it meets the door threshold. That’s when the phone calls start.
Which Unilock Models This Applies To

Unilock is a paving and wall system brand, so “model” here means the specific series, not a machine. The lines we see most on Los Angeles additions and ADUs are Brussels Block, Beacon Hill, and Umbriano for the patio and entry fields, Rivercrest and Olde Quarry for retaining walls, and Brussel’s Dimensional for step units and caps. Each series has its own thickness tolerance and edge profile, and that’s the first compatibility gotcha: a Brussels Block replacement won’t sit flush against Umbriano because the chamfered edges don’t match, and the joint sand line will read wrong across the whole field.
Identify your part by the stamp on the back of a lifted unit, the series name on the original invoice, or a measured width and thickness. Most full units are 60mm thick, but the wall and cap pieces run deeper, and mixing them is where projects go sideways.
OEM versus aftermarket matters less than people think here. Unilock units are manufactured to a spec, and a quality aftermarket paver that matches thickness, color family, and compressive rating will perform the same underfoot. What you cannot do is swap a different profile into a visible field and expect it to disappear.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Home Additions & ADU Is Failing
- Cracks following the same line every year. That’s usually a base failure, not a paver failure. The substrate under the unit has settled or wasn’t compacted to depth, and no amount of replacement units fixes it until the base is redone.
- Step units rocking at the threshold. The cap has separated from the mortar bed or the step block has shifted. On an ADU entry in Los Angeles this is a trip hazard, and it lets water into the wall assembly behind it.
- Efflorescence that returns after cleaning. White bloom that comes back is moisture moving through the unit from below. It’s a drainage signal, not a stain problem.
- Joint sand washing out after storm season. Wide gaps mean the sand is being pulled through a failing base or the wrong polymeric product was used.
- Wall caps lifting or tilting away from the seat. Adhesive breakdown plus thermal movement. In our California sun the cap on a south-facing wall takes the worst of it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the hardscape and structural scope on a Unilock addition:
| Scope | Installed Range (Los Angeles) |
|---|---|
| Home Addition (full project) | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
| Paver Patio Install (Unilock field) | $4,130 – $12,980 |
What drives the range: square footage, whether the base has to be excavated and recompacted, wall height and engineering on hillside lots, and whether the addition needs a new foundation tie-in. Every quote is line-item, with parts and labor separated so you can see what the Unilock material itself costs. All completed work carries the 365-Day Done Right Promise: if it fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely lift a loose cap, measure thickness and width, photograph the back stamp, and check whether joint sand has washed out. That’s a homeowner’s diagnostic, and it helps us quote accurately.
What you shouldn’t do yourself: pull a step block out of a wall, reset a cap on a retaining wall, or dig into the base under an addition threshold. A retaining wall cap is holding back engineered load, and once it’s loose, a weekend repair can turn into a wall failure. On ADU entries the step assembly is often tied into the foundation and framing.
We install Unilock products as an independent contractor and are not affiliated with Unilock. Call (844) 343-6681 and we’ll tell you what it takes to square it away.
FAQs

How long should a Unilock paver field last in Los Angeles? Twenty to thirty years is realistic if the base was installed to depth and compacted correctly. In our climate the failure driver is UV and dry-season shrink-swell on clay soils, not freeze-thaw, so base prep decides lifespan more than the unit itself.
Can it be repaired instead of replaced? Often yes. Isolated cracked units and washed-out joints can be lifted, reset, and re-sanded. If the crack pattern repeats across the field or a wall cap keeps moving, the base or bed is the problem and a repair won’t hold. Call (844) 343-6681 for an exact quote; estimates are free.
How long does the swap take? A single-unit or cap replacement is a few hours. A field reset over a recompacted base on an addition entry typically runs two to four days, weather permitting, and we give you the schedule in writing before we start.
How do you source the part? We verify your series from the stamp, invoice, or measurement, then order through documented Unilock distribution channels so the spec is traceable. We don’t claim to stock Unilock parts or carry them on a truck; we match and order the right unit for your series. We also work with KraftMaid, Cambria, and Silestone when the addition scope reaches the interior.
Bradford Remodeling Co Los Angeles is part of the Garrison Partners family, held to The Garrison Standard, with background-checked, uniformed technicians and a live person answering the phone around the clock.
Ready to price it? Call (844) 343-6681 for a free estimate. You’ll get a written, line-item price before any work starts, and a signed guarantee in your hand at close.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












