







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Home Additions & ADU: The Los Angeles Owner’s Guide
We build and finish Tremron-compatible home additions and ADUs in Los Angeles from start to signed close, with pool-to-permit budgets from $53,100 to $153,400 for an addition and $106,200 to $259,600 for a full ADU. Because this is planned construction and not an emergency repair, scheduling runs on the permit calendar, not on a same-day dispatch. Owners usually call us after a smaller job has already gone sideways: a paver apron or hardscape section around the addition has heaved or settled against the new foundation, a door or window set into the new wall reads loose at the frame, or a half-built ADU was abandoned by a crew that stopped returning calls. That is the moment the missing piece stops being cosmetic and becomes a build problem.
Which Tremron Models This Applies To
Tremron makes hardscape and masonry products, not framing, doors, or windows. So the “Tremron part” on a home addition or ADU is almost always a paver, wall block, or step unit tying the new structure into the site, and the model line matters. Tremron’s paver families differ in face dimensions, thickness, and laying pattern, and a 60mm paver and an 80mm paver will not sit flush at the same edge course. Before any part is matched, we read the band or imprint on the underside of an intact unit and cross-check thickness with a caliper, not a tape measure. Matching color across production runs is the other gotcha: dye lots shift, so an apron repaired with a newer batch of the same model can read a shade off in direct Los Angeles sun. Where an exact Tremron unit is not the right call, a documented equal like Belgard handles the same load in the same thickness. Bradford Remodeling Co Los Angeles is an independent contractor, not affiliated with Tremron, and we source against the spec, not the label.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Home Additions & ADU Is Failing
Failures here are build failures around the hardscape, not the paver coming apart on its own. What we actually see on Los Angeles jobs:
- Heaving or settlement at the addition apron. A paver section abutting the new slab lifts or dips because the base was not compacted to spec or the edge restraint is missing. The paver is fine; the substrate under it is not.
- Standing water at the threshold. Water pools where the addition meets the yard because the finished grade and slope were never set to drain away from the door. In Los Angeles that shows up fast in the first real rain of the season.
- Loose door or window frame in the new wall. A frame that racks or drafts usually traces to a rough opening that was framed out of square or a header sized wrong, which a finish job can’t hide.
- Efflorescence blooming white on the paver face. A chalky haze that reappears after cleaning points to moisture moving through the base, not a stain on the surface.
- An ADU that stalled at framing or rough-in. The most expensive failure we get called on: a previous crew took the deposit and left the shell open to weather.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A home addition in Los Angeles runs $53,100 to $153,400 and a full ADU runs $106,200 to $259,600, with a garage conversion at $35,400 to $94,400. Those are installed numbers: labor, site work, hardscape tie-in, permits pulled and inspected, and finish under one written price.
What moves the number: square footage, whether the ADU is detached or converted, foundation type on a slope lot, and how much hardscape has to be reset around the structure. The low end is a compact bump-out with an existing slab to build off; the high end is a detached two-story ADU with new utilities trenched in.
Every price is written before a tool comes out, line by line, with no numbers that move at the door. All completed work carries the 365-Day Done Right Promise: if the build or the repair fails within that year, we return and correct it at no charge.
DIY or Call Us?
An owner can safely do three things: photograph the failed area with a ruler in frame for scale, check the band on an intact paver to identify the model, and read the permit status on the property. That is where the safe list ends. What goes wrong with DIY here is structural, not cosmetic: a foundation or header framed undersize, a base compacted by hand instead of plate, a drain slope set the wrong way, an ADU built without the permits that a lender and a future buyer will demand. Getting those wrong is not a weekend fix, it’s a teardown and re-permit. One honest note on Los Angeles: an unpermitted ADU discovered at resale can cost more to legalize than it did to build. Call (844) 343-6681 and we’ll tell you which side of that line your project is on.
FAQs

The build outlasts the site work around it if it’s done to code. A properly compacted, restrained paver apron will hold 20 to 30 years; the failure we get called to fix is a base that was never prepped right, which shows in 3 to 5 years under Los Angeles sun and seasonal rain. Call (844) 343-6681 for a free site assessment.
Often yes for hardscape: a heave or settle is usually a base and edge-restraint fix, and the pavers get reset. Framing, header, or slope problems generally need rework, not a patch. We tell you which one you’re looking at before you spend a dollar.
A paver reset around an addition runs 1 to 3 days; a full addition runs 3 to 6 months; a detached ADU runs 6 to 12 months, driven mostly by Los Angeles permitting timelines. You get a written schedule with the price.
We identify the model from an intact unit’s band and measure its thickness, then order against that spec from a documented supplier. We do not carry parts on a truck and we don’t keep local stock. Where Tremron is unavailable, a spec-matched equal like Belgard fills the same load. Call (844) 343-6681 for a free estimate.
We also work with KraftMaid, Cambria, and Silestone, alongside the rest of our documented brand roster, so every finish in your Los Angeles addition or ADU is traceable to a manufacturer spec and warranty. Before a single tool comes out, you’ll have a written price, a clear scope, and the terms of the 365-Day Done Right Promise in your hand, and at close you’ll get a clean site, the documented scope, and your signed guarantee. Call (844) 343-6681 to schedule your free estimate with Bradford Remodeling Co Los Angeles.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












