







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Los Angeles Owner’s Guide
Installed Tremron bathroom remodeling in Los Angeles runs $10,620 to $33,040 for a full bath, and a small bathroom remodel runs $5,900 to $14,160. We work around hard parts the homeowner already has and separate the pieces that need replacement, so you’re not paying to tear out a slab that’s still sound. Every job starts with a written price before any work begins.
Most Los Angeles owners find the problem the same way: a floor tile that rocks underfoot near the threshold, a shower pan that holds water longer than it should, or a grout line that keeps cracking after the third reseal. Each points to something underneath the surface, not the surface itself. We’ve handled enough of these to know that the visible failure is rarely the real one.
Which Tremron Models This Applies To

Tremron’s bath line covers a handful of series: Ridgewood, Sedona, Sonoma, and the mosaic pinwheels and penny rounds. Each series has its own nominal sizing and thickness, and they do not cross-fit. A Sonoma field tile cut to replace a cracked Ridgewood tile will sit proud of the joint line by a visible margin, and the grout will telegraph the difference in a week. You match the series or you match nothing.
Find the series in one of three places: the printed label on the original carton, the reverse face of a pulled tile (Tremron stamps the series and lot code there), or the spec sheet if it survived the project. If none of those exist, measure a full-tile face and its true thickness with a caliper, not a tape. Tremron publishes nominal and actual dimensions separately, and the gap between them is where mistakes happen.
On the OEM-versus-aftermarket question: for field tile and trim, matching the exact series from Tremron is the only reliable path, because pattern registration and edge profiles are proprietary. For setting materials (thin-set, membrane, grout), there is no reason to chase OEM. A quality aftermarket thin-set with the correct ANSI rating for the substrate outperforms and outlasts whatever came in the original kit. We are an independent service provider and not affiliated with Tremron.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
- Hollow sound underfoot. A dead “thud” when you tap the floor tile usually means the thin-set has debonded from the substrate. That happens when the original install skipped the primer or the plywood flexed before cure, and it gets worse every time someone walks on it.
- Grout cracking in straight lines. Cracks that run the direction of the joists point to deflection in the floor framing, not bad grout. Re-grouting a moving substrate buys you about six months before the crack returns.
- Shower pan holding water. Water that lingers more than an hour near the drain or the curb usually means the preslope was built flat, so water sits instead of draining toward the weep holes. The tile looks fine while the mortar bed underneath is saturated.
- Lippage at the joints. One tile edge higher than its neighbor by more than a business card’s thickness is a sign of poor bed coverage during install, or a substrate that has since shifted. It’s also a trip hazard in a wet room.
- Efflorescence on the grout. White mineral blooms that keep coming back after cleaning are evaporating salts from water migrating through the tile assembly. It’s not a cleaning problem, and no sealer fixes it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the Los Angeles market, with parts and labor broken out in your written quote:
| Full bathroom remodel (Tremron tile, fixtures, finish) | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
The range driver is almost always substrate condition, not tile price. A Los Angeles bathroom over original 1950s mud-set mortar needs a different tear-out budget than one over 1990s backer board, and we won’t know which until we open it. We quote the substrate scope in the written price before work starts, so there are no change orders when we find the surprises. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check yourself: tap the floor for hollow spots with a screwdriver handle, look for cracks in the grout lines, and watch how long water lingers in the shower pan. That’s diagnosis, not repair, and it’s worth doing before you call.
Where DIY goes wrong on this work: tile removal on a mud-set floor requires a rotary hammer and enough force to break up mortar without cracking the joist structure underneath. Setting a level field of tile over a sloped substrate takes a screed, a straight edge, and a feel for thin-set working time that comes from repetition. A bad tile job in a wet room also invites water intrusion into the framing, and repair costs climb fast when that happens. Our technicians have up to 22 years of experience on exactly this work. Call (844) 343-6681 for a free estimate – the written price is in your hand before any tool comes out.
FAQs

Properly installed Tremron porcelain tile over a sound substrate typically lasts 30 to 50 years, but the assembly around it decides how long. In Los Angeles, our dry summers and mild winters are gentle on tile compared to freeze-thaw climates, so weathering isn’t the risk here. The real risk is the setting bed: a poor thin-set job or a flat shower preslope will fail within five to ten years regardless of how good the tile is. Call (844) 343-6681 for an exact quote; estimates are free.
Sometimes, yes, and we’ll tell you plainly when a spot repair will hold versus when it won’t. If a single tile is cracked because something heavy dropped on it and the surrounding tile is sound, we can pull it, clean the bed, and reset a matching piece. If the failure is hollow-sounding across a field, or the shower pan isn’t draining correctly, a spot repair just moves the problem to the next tile. Call (844) 343-6681 and we’ll give you the honest answer after looking at it.
A tile replacement in a single room usually runs two to four days, and a full bathroom remodel runs two to four weeks depending on scope. The variable is what’s under the tile: a clean backer board tear-out goes quickly, while a mud-set floor over a 1950s Los Angeles home adds demolition days. We build the schedule into the written price, so you know the forecast before we start. Call (844) 343-6681 for a free estimate.
We order directly from Tremron’s distribution network using the series name and lot number from your existing material, and every order is confirmed against the spec sheet before it ships. Where a lot has been discontinued, we tell you the replacement options and their visual difference up front instead of hoping you don’t notice. Bradford also works with KraftMaid, Cambria, and Silestone when a bathroom remodel pulls in cabinetry or countertops alongside the tile. Call (844) 343-6681 to schedule your free estimate.
Call (844) 343-6681 today to schedule your free estimate. A real person answers, day or night. You’ll get a written price before any work starts, the scope in plain trade terms, and the 365-Day Done Right Promise behind every completed job.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












