







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Home Additions & ADU: The Los Angeles Owner’s Guide
Toto doesn’t manufacture home additions or ADUs, so there’s no “Toto part” to match here. What Los Angeles owners are usually looking for is a contractor who handles the same kind of precision work Toto is known for: tight tolerances, documented specs, finishes that hold up. A home addition in Los Angeles typically runs $53,100 – $153,400 installed, and an ADU runs $106,200 – $259,600. We schedule a site visit, not same-day service; additions take months, not hours, and we won’t pretend otherwise. Owners usually land on this page after a different search: a failing Toto toilet or fixture in a newly built addition or ADU, or a planned ADU bathroom where the Toto spec matters more than the framing.
Which Toto Models This Applies To

Toto’s residential lineup covers three families worth knowing. The Drake and Ultramax lines use standard 12-inch rough-in dimensions and are the most common in Los Angeles homes. The Aquia and Vespin II use a dual-flush system with a different fill valve than the standard models. The Washlet and Neorest lines are bidet seats and integrated units, and their supply connections are not interchangeable with a standard toilet fill valve. If you’re identifying a part, look at the model sticker inside the tank lid or on the back of the bowl, not the seat. Los Angeles homes built before 1985 often have 10-inch rough-ins, and that one-inch difference matters when you’re ordering a replacement.
The OEM-versus-aftermarket decision depends on the part. Toto fill valves and flush valves are worth staying OEM; the aftermarket copies have a known failure pattern on the seal. Wax rings, supply lines, and bolts are standard and aftermarket is fine. For the ADU build itself, we work from documented brand specs throughout: KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, Kohler and Moen fixtures. On a Toto-heavy ADU bathroom, we specify the rough-in and supply location to match the exact model number before the slab is poured. Bradford Remodeling is an independent contractor and is not affiliated with Toto.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Home Additions & ADU Is Failing
- Water pooling at the base of the toilet. The wax ring has failed or the flange is cracked. In a Los Angeles ADU bathroom on a slab, this can start within a year if the flange was set too high or too low during rough-in.
- Continuous running after the flush. The fill valve or flapper seal is worn. Toto’s OEM fill valve lasts longer than most aftermarket versions; if you’re replacing at the two-year mark, you likely have a non-OEM part in there.
- Weak or uneven flush. Mineral buildup in the rim jets, common in Los Angeles and Orange County water. This is usually cleanable, not a part failure.
- Bidet seat not heating or spraying. On Washlet units, the solenoid valve or control board has failed. These are not repairable at the homeowner level.
- Rocking or loosening toilet at the floor. The closet bolts have corroded or the flange has cracked. Left alone, this leads to subfloor rot, which is a much bigger repair inside an ADU wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Home addition pricing in Los Angeles runs $53,100 – $153,400 for a standard addition, and ADU construction runs $106,200 – $259,600. A garage conversion sits at $35,400 – $94,400. Within that budget, bathroom work in the addition typically runs $10,620 – $33,040, and a smaller bath runs $5,900 – $14,160. The range is driven by square footage, foundation type, whether you’re adding a full bath, and the fixture and finish tier. If you’re specifying Toto fixtures throughout, plan for the higher end of the bathroom range.
You get a written line-item price before any work begins, under The Garrison Standard. No numbers that move once the crew is on site. Every completed project is covered by the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge. The written guarantee is in your hand at close, along with a clean site and a documented scope.
DIY or Call Us?
What you can safely check yourself: the toilet model sticker, whether the shutoff valve turns freely, and whether water is pooling at the base. What you shouldn’t touch: anything electrical inside a Washlet or Neorest unit, and any rough-in work inside a wall or slab. Those involve water and power in the same assembly, and a mistake there causes damage that costs far more than the original repair.
For a small repair like a wax ring or fill valve, a licensed plumber is the right call, not a remodeler. For a full addition, ADU, or bathroom build where the Toto spec matters, that’s our lane. Call (844) 343-6681 to schedule your free estimate. A live person answers, 24 hours a day.
FAQs

How long do Toto fixtures last in a Los Angeles home? A Toto toilet body lasts decades, but the fill valve and flapper are usually the first parts to go at around 5 to 10 years. Hard water across much of Los Angeles shortens that window, so plan on inspecting the tank assembly every few years.
Can a failing Toto part be repaired instead of replaced? Often, yes. A running toilet is usually a $20 to $40 flapper or fill valve swap, and a weak flush is often just mineral buildup in the rim jets that can be cleared. A leaking base or a failed Washlet control board means replacement, not repair. Call (844) 343-6681 for an exact quote; estimates are free.
How long does a bathroom build inside an addition or ADU take? A full bathroom inside a new addition runs 3 to 5 weeks once framing and rough-in are done. The full addition or ADU is a multi-month project from permit to final inspection. We’ll give you a written schedule with your written price before work starts.
Do you pull the permits for an addition or ADU in Los Angeles? Yes. We pull the permits and pass the inspections, and the signed paperwork is part of your close-out package. We don’t start work without approved plans.
How do you source Toto-compatible fixtures for a build? We work from documented manufacturer specs, so the rough-in, supply location, and model number are locked in before the slab or framing goes in. That’s how a Toto fixture fits right the first time instead of getting shimmed after the fact.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












