







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The Los Angeles Owner’s Guide
We service and replace failed Therma-Tru windows and doors for Los Angeles homeowners, and a complete door replacement runs $5,310 – $17,700 installed, while impact-rated window installation runs $9,440 – $29,500. Most owners find us the same way: the door starts catching on one corner every summer, the latch no longer lines up with the strike, or the glass fogs between the panes after a cold night and never clears. Then the questions start – can this be fixed, and what does it actually cost? Here’s the straight answer, part by part.
Which Therma-Tru Models This Applies To

Therma-Tru’s entry and patio door lines carry their identification on the top hinge jamb or the edge of the door slab itself – a sticker with the model number, size, and handing (which way the door swings when you’re standing outside). That label is your part number. Without it, a supplier is guessing.
Most Los Angeles homes we see are running Therma-Tru’s fiberglass entry systems: the Classic-Craft and Smooth-Star lines, plus Fiber-Classic on older installs. The compatibility trap is the sill and the hinge. A Smooth-Star door with a fixed sill won’t accept an adjustable sill kit from a different series, and pre-2010 doors often use a hinge pattern Therma-Tru has since revised – so an off-the-shelf hinge set won’t seat without re-drilling. Measure the slab width, height, and thickness to the sixteenth of an inch before you order anything.
On the OEM-versus-aftermarket question for Therma-Tru: OEM weatherstripping, sills, and hinge sets are worth it, because the tolerances are tight and a $12 boot seal that’s 1/16″ off will whistle in a Santa Ana wind. For cosmetic trim and fasteners, a quality aftermarket equivalent is fine and we’ll tell you so when it is.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Windows & Doors Is Failing
Here’s what a failing Therma-Tru door or window actually looks like in Los Angeles, and what’s underneath each symptom.
- The door drags or won’t latch in summer. Fiberglass slabs expand in the heat and the hinges have loosened their bite in the wood jamb. This is why the same door works in January and fights you in August.
- Fogging between the glass panes. The insulated glass unit’s perimeter seal has failed and moisture has entered the airspace. No polish or cleaner fixes this – the sealed unit has to be replaced.
- Daylight visible around the closed door. Compressed or hardened weatherstripping, or a sill that’s warped out of contact. In our dry, sunny climate the foam seals dry out faster than most people expect.
- Water stains or rot at the sill and bottom corners. The sill pan or threshold seal has failed and let water into the substrate. Caught early this is a repair; left alone it turns into a jamb replacement.
- Uneven gaps around the frame or a frame you can rack by hand. The door or window was installed without proper shimming or flashing, and the rough opening is no longer square.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what replacement work runs in the Los Angeles market, installed, parts and labor included:
| Work | Installed Price Range |
|---|---|
| Window replacement | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
| Full door replacement (entry or patio) | $5,310 – $17,700 |
The range is driven by three things: door or window size, glass package (energy-rated vs impact-rated is the big jump), and how much of the rough opening needs repair once the old unit is out. What you get from us is a written price before any work starts – line by line, with the part, the labor, and the disposal spelled out. No number that moves at the door. Every project is covered by the 365-Day Done Right Promise: if the installation fails inside that full year, we come back and correct it at no charge.
DIY or Call Us?
Some of this you can check yourself, safely. Feel for air leaks around the closed door with a wet hand on a windy day. Look for daylight at the sill and hinges. Check that the label on the jamb is intact so you know the model. Clean and re-tension a loose hinge screw with a longer screw if the jamb wood is sound.
Where it goes wrong is when the frame itself is out of square, the sill is rotted, or the sealed glass unit has failed. Resetting a door or window in a rough opening that’s already moved means pulling the unit, checking the flashing and the header, and re-shimming to plumb – and a blind re-hang almost always leaves you with a door that still won’t latch. This is also genuinely heavy, sometimes glass-laden work, and a unit that drops out of the opening is a serious injury. If you’re seeing rot, water intrusion, or a frame you can rock by hand, call (844) 343-6681 for a free estimate, and we’ll tell you what’s worth repairing and what’s worth replacing.
FAQs

How long do Therma-Tru windows and doors last in Los Angeles? The fiberglass door slab itself will last 30 years or more, but the parts around it fail sooner – weatherstripping and sill seals typically run 7 to 12 years in our dry, sunny climate before the foam dries out and the door starts to leak air. The sealed glass unit usually lasts 15 to 20. Call (844) 343-6681 for an exact quote on the part that’s failing – estimates are free.
Can I repair the part instead of replacing the whole door or window? Yes, often – a hinge set, weatherstripping, sill, or threshold is a repair, not a replacement, and the existing slab stays. A failed sealed glass unit can also be swapped without replacing the frame. If the jamb is rotted or the frame is out of square, replacement is the honest answer. Call (844) 343-6681 and we’ll tell you which side of that line you’re on.
How long does the swap take? A hinge set, sill, or weatherstrip job is usually a couple of hours. A full door or window replacement is typically a one-day job for a standard unit, longer if the rough opening needs repair or a permit is involved – and in Los Angeles, exterior door and window replacements generally require a permit and inspection.
How do you source the part? We match the part to your Therma-Tru model number from the jamb label, or measure the slab and frame precisely if the label is gone. We don’t carry stock of parts or hold inventory on a truck – the part is ordered to your door’s exact spec, and we’ll give you the written price before anything is ordered. Call (844) 343-6681 for a free estimate.
A note on who we are: Bradford Remodeling Co Los Angeles is an independent service provider – we are not affiliated with Therma-Tru. We work with a documented roster of name-brand materials, including Therma-Tru doors, KraftMaid cabinetry, Cambria and Silestone surfaces, so your specifications stay traceable. Our technicians have up to 22 years of experience, and our phone is answered by a live person 24/7.
If you’re in Los Angeles with a Therma-Tru door that won’t latch, a window that’s fogged, or a sill that’s leaking, stop guessing at the part. Call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate – you’ll get a written price before any work begins, and every installation is backed by our 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












