







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Driveway & Pavers: The Los Angeles Owner’s Guide
Techo-Bloc paver driveways in Los Angeles typically run $8,260 to $21,240 installed, depending on square footage, base prep, and which Techo-Bloc series you choose. We install and repair Techo-Bloc systems across the city, and we give you a written price before any work starts. Most owners don’t wake up one morning and decide their driveway failed. It happens in stages – a paver that rocks when you walk on it, a joint that keeps washing out after every rain, a section that sits a half-inch lower than the rest. You notice it backing out at 7 a.m., and then you can’t un-notice it.
Key Takeaways
- Techo-Bloc paver driveways in Los Angeles generally cost $8,260 to $21,240 installed.
- Most paver failures we see trace back to base prep, not the pavers themselves.
- We’re an independent contractor, not affiliated with Techo-Bloc, and we source the correct series and thickness for your layout.
- Every completed install carries the 365-Day Done Right Promise in writing.
Which Techo-Bloc Models This Applies To

Techo-Bloc builds driveway pavers across several product lines, and they don’t all behave the same way under a car. Their thicker units – think Blu 60, Blu 80, and the larger-format slabs in the Industria and Aberdeen families – are engineered for vehicular loads. The thinner wall and patio units in those same collections are not. One of the most common mistakes we correct in Los Angeles is a driveway that was laid with patio-grade thickness because the color matched the backyard. Under a 4,000-pound vehicle, that’s a failure waiting on a timeline.
To identify what you have, pull a paver from a corner or an edge where the bedding is exposed and measure it. A true driveway unit in a Techo-Bloc system runs thicker than a walkway piece – usually in the 2 3/8-inch to 3 1/8-inch range depending on the series and profile. Check the underside for the stamped series name or the mold mark. If you can’t find it, the shape and the joint dimension will tell you. Techo-Bloc textures and joint spacings are distinctive once you’ve handled enough of them.
On the OEM-versus-aftermarket question: for Techo-Bloc specifically, matching the exact series matters more than matching a part number. A technically “compatible” paver from another maker can differ in thickness by an eighth of an inch, and that’s enough to telegraph through the surface within a season. We source the correct Techo-Bloc unit whenever it’s still in production and tell you plainly when a discontinued line means we patch with the closest match and blend it into the field.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Driveway & Pavers Is Failing
Paver driveways fail in recognizable patterns. Here’s what we look for when we walk a Los Angeles property, and what each symptom usually means underneath:
- Pavers that rock or feel loose underfoot. The bedding sand has migrated or the base compacted unevenly. Once a unit moves, the joints around it open up and the problem spreads outward.
- Joint sand that washes out after rain. Missing joint sand lets water straight into the base. In Los Angeles, where we go months dry and then get concentrated winter storms, that cycle is brutal on an under-filled joint.
- Depressions or ruts where tires track. This is almost always a base problem, not a paver problem. The sub-base wasn’t compacted in lifts or the soil underneath wasn’t drained.
- Efflorescence – the white chalky haze. Mineral salts wicking up through the paver. Common in our climate on new installs and usually cosmetic, but persistent bloom can signal trapped moisture in the base.
- Heaving near the edges or against the garage slab. Edge restraint has failed or the transition wasn’t set right. Water gets in at the perimeter and lifts units through freeze-free but still expansive clay soils.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Techo-Bloc driveway and paver work runs in Los Angeles, calibrated to what we actually quote:
| Scope | Installed Range |
|---|---|
| Paver Driveway Installation (Techo-Bloc) | $8,260 – $21,240 |
| Paver Patio Installation | $4,130 – $12,980 |
| Driveway Replacement | $5,900 – $16,520 |
| Driveway Sealing | $295 – $825 |
The range moves on square footage, the series you pick, how much excavation and base rebuild the site needs, and whether we’re pulling up an old surface first. A driveway that only needs joint sand and a re-set of a few units sits at the low end. A full tear-out with a fresh compacted base and new edge restraint sits at the top. You get a written, line-item price before work starts – parts and labor broken out so you can see what you’re paying for. Every completed job is covered by the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.
DIY or Call Us?
Some things you can check yourself safely. Walk the driveway and mark loose units with chalk. Sweep the joints and see how much sand disappears. Look at the edges where the pavers meet the garage and the street – if they’re spreading, that’s a perimeter issue. Re-sanding joints is a reasonable weekend task, and sealing is something a careful homeowner can do with the right product.
What goes wrong in DIY is the base. Rebuilding a failed section means excavating to depth, grading for drainage, compacting in lifts, and re-setting edge restraint – and if the compaction isn’t right, the same rut comes back in one season. That’s the part that costs you twice when it’s done by hand without the equipment. If the driveway is moving under your tires, it’s a base call, not a surface call. Call us at (844) 343-6681 and we’ll walk it with you and give you a written price – free estimate, no pressure.
FAQs

A properly installed Techo-Bloc driveway lasts 25 to 30 years or more in our climate, and the pavers themselves often outlast the base. The pavers don’t wear out from sun or rain the way asphalt does; what determines lifespan is base compaction, drainage, and joint maintenance. Call (844) 343-6681 for a free assessment of what your driveway actually needs.
Often yes. If the failure is isolated to a section, loose joints, or edge restraint, we can lift the affected units, correct the base underneath, and re-set them. Full replacement is only necessary when the base has failed across the whole field or the original install used the wrong paver thickness. We’ll tell you which one you’re looking at honestly – the written price covers either path.
A joint re-sand and spot repair is typically a one-day job. A full Techo-Bloc driveway replacement in Los Angeles usually runs three to six days depending on square footage and how much base work is needed. You’ll have the exact schedule in writing before we start, along with the scope and the guarantee.
We match your existing series by measuring thickness and joint spacing and checking the mold mark, then source the correct Techo-Bloc unit from authorized suppliers. If the line is discontinued, we tell you upfront and blend the closest match into the field rather than pretending it’ll disappear. We also work with KraftMaid, Cambria, and Silestone on other parts of the home, so your whole project stays under one documented scope.
If your Techo-Bloc driveway is moving under your tires or the joints won’t hold sand, call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate. We’re an independent contractor, not affiliated with Techo-Bloc, and every Los Angeles job comes with a written price before work starts, background-checked uniformed technicians, and the 365-Day Done Right Promise. A live person answers the phone around the clock.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












