A Bradford company - serving Los Angeles, CA
An open living room and dining area after a whole-home remodel
Tamko · Los Angeles

Tamko Windows & Doors in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A powder room with botanical wallpaper and a stone sink
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Windows & Doors: The Los Angeles Owner’s Guide

We install and service Tamko windows and doors across Los Angeles, and the installed price for a failed unit typically runs $5,310 to $17,700 for standard window replacement and $9,440 to $29,500 for impact-rated units, depending on size, series, and glass package. The swap itself is usually a one-day job per opening once the correct part is on site. Most Los Angeles owners discover the problem the same way: a window that won’t latch flush, a door that drags on the sill in summer, or fog between the panes that never clears after a rain. By the time you’re reading this, the part has usually been failing quietly for a season or two.

Call (844) 343-6681

Key Takeaways

  • Tamko window and door parts are matched to a specific series – the model label on the frame is what identifies yours.
  • Installed replacement in Los Angeles runs $5,310 to $17,700 for standard windows and $9,440 to $29,500 for impact-rated.
  • We source OEM Tamko parts or documented aftermarket equivalents; we don’t carry parts on a truck.
  • Every install carries our 365-Day Done Right Promise: if the work fails inside a year, we come back and correct it at no charge.

Which Tamko Models This Applies To

A whole-home remodel with the living, dining and kitchen areas opened up

Tamko’s window and door line covers vinyl new-construction and replacement windows, sliding patio doors, and entry door systems. The part you need – sash, balance, sill, sweep, glazing unit, or hinge set – is determined by the series, not the brand name alone. Two Tamko windows that look identical from the curb can take completely different balance assemblies. So the first job is identification.

Open the operable sash and look for the manufacturer’s label on the top or side of the frame channel. It carries the series name, the size call-out, and often a date code. If the label is gone, we measure the visible glass, the frame depth, and the sash weight – those three numbers narrow the field fast. From there you make the OEM-versus-aftermarket call. OEM Tamko parts match the original spec exactly, which matters most on tilt-latch hardware and weatherstripping profiles. A documented aftermarket balance or sweep can be a sound, cheaper equivalent when the profile is verified against the original. What we won’t do is guess. If the part can’t be matched to a verifiable spec, we say so before anyone orders anything. We’re an independent service provider and not affiliated with Tamko; that independence is why we can recommend whichever path actually fits your window.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Windows & Doors Is Failing

  • The sash won’t stay up. A worn or broken balance – the spring-and-cord assembly that counterweights the sash – lets the window drop. In Los Angeles, the constant thermal cycling between cool nights and hot afternoons wears balances faster than in milder climates.
  • Fog or condensation between the panes. The sealed insulated glass unit has lost its seal. Once the desiccant is saturated, no amount of wiping fixes it; the IGU has to be replaced.
  • The door drags or won’t latch. A sagging hinge or a swollen sill. Our dry summers and occasional winter rain push wood and composite sills through expansion and contraction cycles that pull hinge screws loose.
  • Drafts or water intrusion at the frame. Failed weatherstripping, a cracked sweep, or deteriorated glazing bead. In Los Angeles this often shows up as dust and fine grit on the interior sill after a Santa Ana wind event.
  • Cracks in the vinyl frame or sash corner. UV exposure and heat warping. Vinyl that sees direct afternoon sun on a south-facing wall can become brittle over time, and a cracked weld at the corner can’t be glued back to original strength.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

Here’s what installed pricing looks like in the Los Angeles market, using our standard ranges:

Scope Installed Range
Window replacement (standard) $5,310 – $17,700
Impact-rated window installation $9,440 – $29,500

The range moves on three things: the size and count of openings, the glass package (standard insulated versus impact-rated or low-E), and whether the old unit comes out clean or reveals hidden rot or a bad rough opening. We give you a written price before any work starts, itemized so you can see parts and labor separately. No numbers that move at the door. Every install is covered by the 365-Day Done Right Promise – a full-year written guarantee; if the work fails inside that window, we return and correct it at no charge. When we finish, you get a clean site, the documented scope, and the signed guarantee in your hand.

DIY or Call Us?

Some checks are safe for any homeowner. Look for the model label. Measure the visible glass and frame depth. Test whether the sash drops on its own or the door drags on the sill. Write down the symptoms.

What we don’t recommend is pulling a sash or replacing a balance assembly yourself. A window sash is heavy and awkward, and a released balance cord can whip. On doors, resetting a hinge or rehanging a slab wrong can crack the frame or strip the rough opening, and that turns a part swap into a framing repair. Tamko window and door parts are matched to spec; the wrong balance or sweep fails again in a month and you’ve paid twice. If you’re not certain of the part number and the install method, call us at (844) 343-6681 and we’ll give you a straight answer on whether it’s a repair or a replacement.

FAQs

A walk-in shower with large-format tile and a built-in niche

How long do Tamko windows and doors last in Los Angeles? Expect 20 to 30 years for a well-installed vinyl Tamko window, though balances and weatherstripping are wear items that often need service well before the frame does. The Los Angeles sun and thermal swing are hard on seals and hardware, so plan on a balance or sweep check around the 10-to-15-year mark. Call (844) 343-6681 for an assessment of your specific units – estimates are free.

Can a failed Tamko window or door be repaired instead of replaced? Often, yes. A single balance, sweep, hinge set, or insulated glass unit can be replaced without touching the frame, which costs far less than a full unit swap. The exception is a cracked vinyl frame weld or a warped sash – those can’t be repaired back to original strength. We’ll tell you which side of that line your window sits on before quoting.

How long does the swap take? A single window or door replacement is typically a one-day job once the correct part is on site, including cleanup and a final operation check with you. Multi-opening jobs run longer, and we schedule them in a written scope so you know the dates before work starts. Call (844) 343-6681 for a free estimate and a realistic timeline.

How do you source the Tamko part? We identify your series from the frame label or a set of measurements, then order either the OEM Tamko part or a documented aftermarket equivalent matched to the same spec. We don’t claim to stock parts or carry them on a truck – the part is ordered to your window, verified on arrival, and installed by a background-checked, uniformed technician. We also work with KraftMaid, Cambria, and Silestone on the interior side when a window or door project touches cabinetry or surfaces.

If you’ve got a Tamko window that won’t stay up, a door that drags, or fog between the panes, we’ll give you a written price before any work starts and a full-year guarantee on the install. Call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate – a live person answers, 24/7.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch