A Bradford company - serving Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Los Angeles

Schluter Driveway & Pavers in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A remodeled staircase with wood treads and a slim metal railing
A small remodeled galley kitchen with cabinets to the ceiling
A finished basement family room with a media wall and wet bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Driveway & Pavers: The Los Angeles Owner’s Guide

Schluter driveway and paver installations in Los Angeles typically run $8,260 to $21,240 for a paver driveway, and Schluter profiles and edge restraints are installed as part of that scope. A failed profile, a loose paver, or an edge piece that has come off the paving doesn’t make a driveway unsafe to use, so we schedule these jobs with a written price inside a normal, planned window rather than promising same-day arrival. The part that failed is usually found the plain way: you’re walking to the car, a paver rocks under your heel, or a metal edge strip that used to sit flush now stands a quarter inch proud of the pavers. In Los Angeles, the failure arrives on a schedule that fits our weather – two or three dry seasons of a 40-degree-plus swing between afternoon heat and cool nights, and the sand joints open and let water under the edge piece that holds the paver course against the driveway apron.

Call (844) 343-6681

What fails first is almost never the paver itself. It’s the restraint. Schluter’s paving profiles and edging act as the vertical keeper for the perimeter of the paving, and they only work while the substrate under them stays compacted and drained. When it doesn’t, the profile lifts, the pavers spread, and the joint sand washes out into the landscape strip or the gutter. If you’re pricing the planter or patio side of the project too, our paver patio installation page covers the same restraint logic.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s paving and edging families are sold as separate series, and the part you need has to match the series AND the paving thickness. The most common pairing is a profile intended for 2-inch (50 mm) and thinner paving, with a small set of part numbers covering 2-3/8-inch (60 mm) material. If your driveway uses standard 2-3/8-inch pavers and you buy the 2-inch profile because it’s what the shelf had, the profile sits below the paver face and the manufacturer’s edge detail is void – no amount of caulk or sand hides that. Measure the paver. Measure the profile pocket. They must be within about 1/8 inch.

Identifying the right part: the profile has a stamped or printed series code along the back face, along with a lot number. Photograph that code and the paver’s actual edge thickness, and that pair of facts is enough to match it. If the code is worn off, measure the offset from the paver face to the anchor leg.

OEM vs aftermarket: for Schluter specifically, aftermarket “compatible” edging is a real false economy on a driveway. The paver profiles are engineered around a specific anchor-leg geometry and a specific stainless or coated finish that behaves a certain way in coastal and inland heat cycles. We specify the manufacturer part, match it to your paving thickness, and put that part number on the written price before we order. We don’t keep parts in stock and nothing rides on a truck; we source the correct profile per job with its documented spec attached.

We’re an independent service provider working with Schluter materials – not Schluter, Inc., and not affiliated with them. Our team installs Schluter systems alongside the documented brands on our approved list, which also includes KraftMaid, Cambria, and Silestone on the interior side.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Driveway & Pavers Is Failing

  • The edge profile stands proud of the paver face. The substrate under the anchor leg has settled or washed out, so the profile’s vertical position is no longer being held by compacted base – the paving profile is doing the job the base was supposed to share.
  • Pavers along the perimeter rock when you step on them. Sand has washed from the joints over two or three seasons, the pavers lose lateral confinement, and the edge profile that was supposed to be the last line of restraint has nothing left to restrain.
  • A visible gap between the profile and the first paver course. This is restrained-spalling: the profile’s anchor leg has moved, so the paver is no longer pinned against a vertical stop, and the gap opens every hot afternoon and closes every cool night.
  • Rust, coating blister, or white streaking on the profile face. The finish has broken down. On a driveway this matters because the profile is exposed to salt, sun, and the occasional LA rain squall, and a broken coating speeds up undercutting at the anchor.
  • Water pooling against the house-side edge and staining the concrete apron dull dark. The edge detail isn’t shedding water anymore. The cause is the profile’s elevation, not the paver – if the profile stands tall, water runs back under the paving instead of off it.

The LA-specific piece: our inland neighborhoods swing from the low 50s to above 90 within a single day. That thermal cycling works the perimeter restraint harder than driving on the paving does. In the San Fernando Valley and the east side, we regularly see profile failures on driveways that are only five or six seasons old – the paver faces are fine, the edge detail isn’t.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A home office with a built-in desk and shelves

Here’s the honest split. The Schluter profile itself is a small line item. What you’re paying for is the restraint reset and the perimeter paving work around it, because the profile only holds when the substrate under it is right.

Line item Los Angeles range
Paver driveway installation (full scope, profile included) $8,260 – $21,240
Driveway replacement $5,900 – $16,520
Driveway sealing (protects joints after the fix) $295 – $825
Paver patio installation (same restraint logic, back yard) $4,130 – $12,980

What drives the range: how many linear feet of perimeter are affected, whether the base under the profile can be edge-compacted in place or has to be lifted and recompacted, and whether the fix ties into a driveway replacement. A single failed edge run along one side of a driveway is at the low end. A full perimeter reset on a driveway that’s also due for replacement takes you toward the top. Concrete driveways, if you’re comparing, run $5,310 to $14,160, and asphalt $4,130 to $10,620 – useful numbers to have when the profile quote comes back and you’re deciding whether to reset the paving or replace it.

Everything we do is covered by the 365-Day Done Right Promise: a full-year written guarantee on the work. If the profile or the paving around it fails inside that window, we come back and correct it at no charge. The guarantee term is on the written price before we start, and you keep a signed copy at close-out.

DIY or Call Us?

What an owner can safely do: identify the profile series code, measure the paver thickness, photograph the failure, and clear loose sand and debris away from the joint for a closer look. That’s it. What goes wrong when you go further: the anchor leg is set under compacted base, and resetting it means lifting the perimeter pavers, recompacting the base in a narrow trench with a plate compactor, and re-setting the profile to the correct elevation relative to the paver face. Hand-tamping in a 6-inch strip doesn’t get there. The profile lifts again inside a season, and you’ve paid for the pavers twice. There’s also the base-drainage question – a driveway edge that pools water is a drainage design issue, not a caulk issue.

The plainest advice: check and measure on your own, then have us quote it. Call (844) 343-6681 for a written, line-item price before any work starts. A live person answers, 24 hours a day. No numbers that move at the door.

FAQs

A remodeled kitchen with a waterfall island and wood cabinets

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquette

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch