







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Los Angeles Owner’s Guide
We install Schluter bathroom systems and Schluter-compatible remodeling across Los Angeles. Typical installed bathroom remodels run $10,620 to $33,040, and smaller baths land between $5,900 and $14,160. We’re an independent service provider, not affiliated with Schluter, and every project starts with a written price before any work begins.
Homeowners usually find us after a master shower starts leaking into the ceiling below, or when a tile field near the drain goes hollow and loose underfoot. The failure gets traced back to a membrane, a drain flange, or a board that was never installed to specification. In Los Angeles, we see a lot of this in 1950s and 1960s tract homes around the Valley where a previous owner tiled straight over drywall without any waterproofing at all.
Which Schluter Models This Applies To

The Schluter bathroom lineup breaks down into a few families, and matching the right one to your situation is most of the job. The Schluter-KERDI line covers sheet-applied waterproofing membranes and pre-formed shower corners and niches. KERDI-BOARD is the tileable building panel that replaces cement backer board. KERDI-LINE handles linear drains, and KERDI-DRAIN covers the point drain with its integrated flange. SCHIENE and DITRA apply to edge profiles and uncoupling underlayment under the floor tile.
To identify what you’re working with, check the printed markings along the membrane sheet edge and the model label on the drain assembly box. Measure the drain grid and the membrane thickness; the part numbers cross-reference to those dimensions. For this brand, we source the OEM component rather than a generic substitute, because the drain flange, membrane, and drain body have to seat as one documented system. If your tile or hardware is KraftMaid, Cambria, or Silestone, we spec the trim and fixtures to match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
- Water staining on the ceiling below the bathroom. The most common cause is a compromised membrane seam or a drain flange that was never fully bedded in thinset, so water wicks past it.
- Hollow or loose tile around the shower drain. When the drain assembly shifts, the tile bond breaks first at the perimeter; if a loose tile moves underfoot, the drain is the place to look.
- Grout lines that stay dark or weep long after a shower. Persistent moisture in a grout joint usually traces back to a failed membrane, not the grout itself.
- Lifting or bubbling at tile edges near a shower niche or bench. A pre-formed corner that wasn’t properly overlapped lets water behind the board and causes the substrate to swell.
- Musty smell or soft drywall on the back side of a bathroom wall. This signals a slow leak that’s been going for months, and in Los Angeles warm, dry weather can mask it until the damage is advanced.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Bathroom remodeling with a proper Schluter system in Los Angeles runs $10,620 to $33,040 installed. A small bathroom remodel runs $5,900 to $14,160. A walk-in shower install runs $5,310 to $14,160, a tub-to-shower conversion $4,130 to $11,800, and a straight shower replacement $3,540 to $10,030.
The number moves on shower size, drain configuration, whether the substrate has to come out, and the tile and fixture selections. You get a written line-item price before work starts: parts, labor, and what’s covered, spelled out. The parts-plus-labor split is shown, not bundled into one figure. Every completed project carries the 365-Day Done Right Promise, a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: look under the bathroom for staining, press on tile near the drain for movement, sniff the wall cavity, and note exactly where the trouble starts. Reading the manufacturer’s installation guide is worth the time; it tells you what a correct install requires.
Where it goes wrong is the actual repair. Schluter systems are only waterproof when the membrane, band, and drain are installed as one continuous, properly overlapped assembly with the right thin-set. A shade-tree patch over a failed drain flange will usually leak again, and by the time it shows, the substrate is gone. If your shower is leaking, stop using it and call (844) 343-6681 to schedule a free estimate.
FAQs

A correctly installed Schluter shower system typically lasts 30 years or more. The membrane itself is rated for decades; the failure point is almost always the installation, not the material.
Sometimes a localized repair works, but only if the failure is isolated and the surrounding membrane is intact. Once water has reached the substrate or the framing, the shower has to be rebuilt. A free estimate tells you which situation you’re in.
A full shower replacement typically takes a few days to a couple of weeks, depending on tile, drain type, and drying time. We give you the schedule in the written scope before work starts. Call (844) 343-6681 for a free estimate.
We source the OEM component matched to your drain and membrane model. We keep the specification traceable and documented, the same way we handle the KraftMaid, Cambria, and Silestone materials we install. Call (844) 343-6681 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












