A Bradford company - serving Los Angeles, CA
An open living room and dining area after a whole-home remodel
Sakrete · Los Angeles

Sakrete Roofing in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sakrete Roofing: The Los Angeles Owner’s Guide

We install and repair Sakrete roofing systems across Los Angeles, and most roof repairs run $470 – $2,125, while a full roof replacement lands between $9,440 and $23,600 depending on square footage, pitch, and material. Sakrete is a cement and concrete products brand, so “Sakrete roofing” in practice means cement-based roof tile, mortar-set tile beds, and the ridge and cap work that uses Sakrete mortar mixes. That matters because most owners don’t discover the failure until a tile slips, a ridge cap cracks, or a ceiling stain shows up after the first real rain of the season.

Call (844) 343-6681

Which Sakrete Models This Applies To

A built-in window seat in a bay window

Sakrete doesn’t sell finished roof tiles under a model line the way a tile manufacturer does. What you’ll find on a Los Angeles roof is Sakrete mortar and mix product used in the roofing assembly: Surface Bonding Cement for troweled or sprayed applications, Sand Mix and Mortar Mix for bedding and pointing tile, and Crack-Resistant Concrete for structural patching around penetrations. The bag label is your compatibility key. Match the product name and the mix ratio on the bag to the application, not just the color of the bag.

The gotcha we see most: a homeowner replaces a failed mortar bed with the wrong mix. Surface Bonding Cement and standard Mortar Mix are not interchangeable. Surface Bonding Cement is formulated for thin, structural coatings over masonry substrates. Mortar Mix is a bedding and jointing product. Swap them and the repair either cracks out in one thermal cycle or never bonds to the tile at all.

The OEM-versus-aftermarket decision here is really about mix fidelity. Sakrete’s published ratios exist for a reason, and the closest equivalent product from another brand is rarely a drop-in. When we specify a repair, we match the original product class first, then confirm the substrate is sound. We don’t carry parts on a truck and we don’t stock inventory; every job is quoted from a written scope after we’ve seen the roof.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sakrete Roofing Is Failing

Roofing failures in Los Angeles look different from failures in wetter climates. Our dry summers and occasional hard rain events stress mortar joints in a specific way, and the symptoms follow a predictable order.

  • Hairline cracks in ridge caps or mortar beds. Thermal cycling between 90°F summer afternoons and 50°F nights opens joints that were sound in spring. Once water gets behind the mortar, the next cold snap widens the crack.
  • Tiles that lift or shift after wind. Los Angeles gets Santa Ana wind events that push 60 mph in the foothills. Bedding mortar that has lost its bond will let a tile lift, and one lifted tile lets water under the field.
  • Efflorescence, the white chalky bloom on mortar. That’s salt migrating out as moisture moves through the mortar. It’s not cosmetic. It means water is passing through the material.
  • Ceiling stains or attic moisture after rain. Water is already past the underlayment. By the time you see the stain, the decking underneath may be softening, and soft decking means the repair scope grows.
  • Granule or surface loss on flat and low-slope sections. On flat sections, exposed surface wear shows as a chalky, sandy texture. That’s the coating breaking down, and it happens faster on south-facing slopes in Los Angeles sun.

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

Here’s what Los Angeles homeowners actually pay, and what the number covers.

Scope Installed Price Range
Roof repair (mortar, tile, flashing, small sections) $470 – $2,125
Tile roof repair $710 – $2,950
Full roof replacement $9,440 – $23,600
Metal roof installation (if replacement is the right call) $17,700 – $47,200

What drives the range: roof square footage, pitch and how much of the roof is walkable, how many tile courses need re-bedding versus spot repair, and whether the underlayment or decking is compromised. A spot repair on three ridge caps is a $470 job. A repair that turns into a 400-square-foot re-bed with new underlayment is near the top of the repair range.

Every Bradford Remodeling Co Los Angeles roof job gets a written, line-item price before a tool comes out: parts, labor, disposal, and any decking repair, all broken out. No number moves at the door. Every completed job carries our 365-Day Done Right Promise. If the repair fails inside that year, we come back and correct it at no charge.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Roof work is height work, and we treat it that way. A fall from a two-story Los Angeles roof is a serious injury, and no homeowner should be on a pitch above 4:12 without fall protection. That’s the honest line.

What you can safely do from the ground or from a ladder you’re confident on: check for lifted tiles with binoculars, note where efflorescence is blooming, look for staining on the ceiling below, and photograph any crack you can see. That information saves us time and makes your quote more accurate.

What goes wrong when owners DIY: re-bedding a tile with the wrong mortar mix (see above), walking a brittle tile field without a spider board and cracking tiles you didn’t plan to replace, or sealing a crack that has moisture trapped behind it. Any of those turns a $470 repair into a much larger scope. Call (844) 343-6681 and we’ll tell you over the phone whether what you’re describing sounds like a repair or a replacement. The estimate is free and a real person answers, 24/7.

FAQs

An open kitchen and dining area after a remodel

How long should a Sakrete mortar bed or Surface Bonding Cement repair last on a Los Angeles roof?
A properly specified and applied repair should hold 15 to 20 years on a tile roof in Los Angeles conditions, provided the substrate underneath is sound and the correct product class was used. The failure mode we see most is a repair with the right product over a soft substrate, which fails in 3 to 5 years. Call (844) 343-6681 for an exact quote on your roof; estimates are free.

Can my Sakrete roofing be repaired instead of replaced?
Yes, in most cases. If the tile field is intact and the failure is limited to ridge caps, mortar joints, or flashings, a targeted repair in the $470 – $2,125 range is the right call. Replacement makes sense when underlayment has failed across a large area or decking is soft. We’ll tell you which one you’re looking at before you commit to anything. Call (844) 343-6681 to schedule the free estimate.

How long does a Sakrete roofing repair take?
A single ridge-cap or mortar-joint repair is typically a half-day. A multi-section re-bed or repair involving underlayment is usually one to three days depending on square footage and access. Weather matters here: we schedule around rain rather than fighting it. Call (844) 343-6681 for a written scope and timeline.

How do you source the Sakrete materials for my repair?
We source the product by the spec on your existing roof, matching product class first (Surface Bonding Cement vs. Mortar Mix vs. Sand Mix), then color and formulation. We confirm the substrate is sound before the material goes down, because the right mix over bad substrate is still a failed repair. All materials and labor are itemized in your written price. Call (844) 343-6681 for a free estimate.

Contact Bradford Remodeling Co Los Angeles

If you’re in Los Angeles and you’ve spotted a lifted tile, a crack in the ridge mortar, or a stain on the ceiling, get it looked at before the next rain event changes the scope. Call (844) 343-6681 for a free estimate. We’ll put the price in writing before any work starts, explain exactly what the 365-Day Done Right Promise covers, and hand you a signed guarantee when the job closes. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Sakrete. We also work with KraftMaid, Cambria, and Silestone on the interior side when a roof repair turns into a bigger project.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with patterned floor tile and painted wallsA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sinkA remodeled kitchen with a waterfall island and wood cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch