







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Driveway & Pavers: The Los Angeles Owner’s Guide
Sakrete makes the concrete, mortar, and jointing materials behind a lot of Los Angeles driveways and paver surfaces, and when the material or the base under it gives out, we replace and reinstall the affected section with Sakrete-compatible products. A typical paver driveway installation in Los Angeles runs $8,260 – $21,240 installed, and a straight concrete driveway runs $5,310 – $14,160. We install these on a scheduled basis, not same-day, because proper curing and base prep take time. Call (844) 343-6681 for a written price before anything starts.
Most owners find out something is wrong the same way: a hairline crack in the driveway widens over one summer, a paver near the garage apron starts rocking when the car rolls over it, or the joint sand washes out after the first rain of the season. Once water gets under the surface, the base loosens and the failure spreads. Los Angeles’s dry summers and occasional heavy winter rain put a particular strain on slab edges and paver joints that weren’t sealed correctly.
Which Sakrete Models This Applies To

Sakrete’s driveway and paver line covers a few distinct products, and matching the right one to your job matters more than it sounds. The common ones you’ll run into in Los Angeles:
- Sakrete High-Strength Concrete Mix – the bagged 4000 PSI mix used for driveway slabs, aprons, and walkway pours. Look for the bag label’s PSI rating and yield in cubic feet.
- Sakrete Paver Base – the compactable, sand-and-gravel material laid under pavers. This is where most Los Angeles paver failures actually start.
- Sakrete Polymeric Sand – the joint sand that hardens between pavers. It’s the one product on this list you’ll touch most often because it washes out.
- Sakrete Concrete Bonding Adhesive and patching compounds – for repairs to existing slabs.
To identify what’s already installed, check the substrate color and compaction under a lifted paver, read the original bag or spec sheet if you still have it, and measure the joint width (polymeric sand is spec’d for joints typically 1/8″ to 1-1/2″). On the OEM-versus-aftermarket question: Sakrete’s own products are the standard, but a quality bulk equivalent from a local ready-mix supplier can meet the same PSI and be more economical on a large slab. We’ll tell you plainly which makes sense for your job and put it in the written scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Driveway & Pavers Is Failing
- Rising damp or dark patches on the slab. Moisture is wicking up through a crack or a failed seal, which means the surface is no longer shedding water.
- Rocking or settling pavers. The paver base under the surface has lost compaction, usually from water intrusion or an inadequate initial base depth.
- Joint sand washing out after rain. Polymeric sand that wasn’t installed to spec or has aged past its service life stops locking the pavers together.
- Widening cracks and spalling at the edges. Freeze-thaw isn’t the driver in Los Angeles, but thermal expansion on long slabs without proper control joints is.
- Weeds pushing through joints or the slab edge. A sign the joint material has failed and the base is exposed to moisture and roots.
Replacement Cost & What’s Included

Here’s what the work runs in Los Angeles, installed, with parts and labor broken out in your written quote:
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway replacement | $5,900 – $16,520 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
What moves the range: total square footage, base depth and compaction required, whether existing material needs removal and hauling, and the finish you choose. You get a written price before work begins. Nothing moves at the door. Every project we complete carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: lift one edge paver to see the base condition, measure joint widths, and look for cracks wider than a credit card. Where DIY goes wrong on this job is base prep and slab work. Laying pavers on a thin or loose base looks fine for one season, then settles and rocks. Pouring a slab without proper thickness, reinforcement, and control joints is heavy lifting with real structural consequence, and a bad pour has to be jackhammered out and redone. For anything beyond a patch or a reseal, call a trained crew. Call (844) 343-6681 for a free estimate on your Los Angeles driveway or paver project.
Frequently Asked Questions

A properly installed concrete driveway using Sakrete High-Strength Concrete should last 25 to 30 years with sealing every few years; a paver driveway can last 25 years or more if the base and joint sand are maintained. Los Angeles’s dry heat and occasional winter rain mean joint sand needs replenishing roughly every 3 to 5 years. Call (844) 343-6681 to talk through what your surface needs.
Often yes. Localized cracks, a few rocking pavers, or failed joint sand can be patched, re-bedded, or resealed without a full replacement. A slab with multiple intersecting cracks and settled sections usually needs replacement rather than a patch that fails again in a year. We’ll tell you which you’re facing and price both. Call (844) 343-6681 for a free estimate.
A driveway sealing runs a day; a paver driveway installation typically takes 2 to 4 days; a full concrete driveway replacement runs about 3 to 5 days plus curing time before you drive on it. Schedule depends on square footage and weather. Estimates are free – call (844) 343-6681 for a written timeline.
We source standard Sakrete products through the usual building supply channels and confirm the exact mix spec against your job’s requirements before ordering. We don’t claim to stock parts or carry inventory on a truck; every job gets what it actually needs, specified in the written scope before work starts. Bradford Remodeling Co Los Angeles is an independent service provider, not affiliated with Sakrete. Call (844) 343-6681 for a free estimate.
Contact Bradford Remodeling Co Los Angeles
We install driveways, pavers, patios, and hardscape across Los Angeles with disciplined base prep, documented materials, and a written price before a single tool comes out. Our technicians have up to 22 years of experience, and every project is backed by the 365-Day Done Right Promise. We also work with KraftMaid, Cambria, and Silestone on adjacent remodels. Call (844) 343-6681 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












