







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Home Additions & ADU: The Los Angeles Owner’s Guide
We build and attach PGT-compatible additions and ADUs in Los Angeles for a typical installed range of $53,100 to $153,400 for a home addition, and $106,200 to $259,600 for a full ADU, with a written price before any work starts. This is planned construction, not an emergency call, so we schedule a site visit and quote rather than promise a same-day install. Owners usually find out something is wrong with a PGT door or window opening during the addition walkthrough: a slider that won’t latch square after framing, a threshold that holds water at the slab, or a sealed unit that fogs two winters after the addition goes up. That first failed part is what sends people searching.
Which PGT Models This Applies To

PGT makes several window and door lines, and the part you need depends on which one is in your wall. The WinGuard impact line is common in Los Angeles homes because it meets the impact-resistance expectations many hillside and fire-zone properties get asked about. PGT’s vinyl single-hung and slider lines use different balances, rollers, and weatherstrip profiles than the impact-rated units, so an aftermarket part that fits a standard slider often won’t seat in a WinGuard frame.
Here’s the compatibility gotcha most people miss: the glass spacer and the sash balance are matched to the unit’s series, not just its rough-opening size. Two PGT sliders can measure the same 72 inches across and still take different rollers. Check for the etched label on the glass corner or the sticker inside the jamb; it lists the series and manufacturing code. From there you decide OEM versus aftermarket. For visible parts like handles and locks, a quality aftermarket equivalent is fine. For structural or water-managing parts like sash balances and thresholds, OEM or a spec-matched equivalent matters, because a wrong balance lets the sash drop and the frame rack.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Home Additions & ADU Is Failing
- Sash won’t stay up or drifts down. The balance has lost tension or the wrong balance was installed. In Los Angeles heat, the vinyl in a balance tube softens and the spring weakens faster than in cooler markets.
- Slider drags or jumps the track. Usually a flattened roller or a track packed with grit. Left alone, the roller chews the track and the whole panel needs replacing.
- Fogging between the panes. The insulated glass seal has failed. Once moisture is inside, the unit can’t be cleaned out; the sealed assembly gets replaced, not wiped.
- Water at the threshold after rain. A worn sweep or a threshold that was set out of level during the addition. This is the one that quietly rots the sill plate under a new ADU.
- Drafts or a latch that won’t catch square. Weatherstrip compression or a frame that shifted as the addition settled. A frame that’s out of square needs attention before you swap parts on it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a PGT window or door part swap inside an addition or ADU in Los Angeles, expect the following installed ranges. These are written prices, parts and labor together, given to you before any work starts.
- Single PGT-compatible window unit replacement in an ADU wall: $470 to $2,125, depending on size and impact rating
- PGT slider roller/balance rework: $295 to $825
- Sealed glass unit swap (fogged pane): $710 to $2,950
- Threshold and sweep correction at an ADU exterior door: $945 to $3,540
- Full home addition build (the broader PGT scope): $53,100 to $153,400
- Full ADU construction: $106,200 to $259,600
The range moves with impact rating, unit size, and whether the frame needs correction before a new part goes in. Every job is covered by our 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Look for the glass label to identify the series. Wipe the track and see if the slider frees up. Test the latch by hand. That much tells you what part you’re dealing with.
Where DIY goes wrong: sealed glass units aren’t a homeowner swap, because a mis-seated unit leaks and fogs again within a season, and impact-rated glass handling is a two-person job with real injury risk if a pane slips. Threshold work on a new addition means opening the frame, and if the sill is already wet, you want it assessed before you button it back up. Replacing a balance or roller on a large slider without the right tool can rack the sash. We’ll give you a written price for the part and install together, and confirm what the 365-Day Done Right Promise covers on the work. Call (844) 343-6681 for a free estimate.
FAQs

How long does a PGT window or door part last in Los Angeles? Sealed glass units in Los Angeles typically hold their seal 15 to 20 years, and sash balances run 8 to 12 in our heat, which is shorter than you’d see in a cooler climate. Coastal air and summer UV both push wear faster, so a part that failed early is worth questioning, not just replacing.
Can the part be repaired instead of replaced? Often yes for balances, rollers, and weatherstrip, which can be re-tensioned or swapped without pulling the whole unit. Sealed fogged glass cannot be repaired once moisture is inside; that assembly gets replaced. Call (844) 343-6681 for an exact quote, estimates are free.
How long does the swap take? A single roller, balance, or weatherstrip job is usually a couple of hours. A sealed glass unit swap is a half-day appointment because the unit has to come out and reseat clean. A frame that’s out of square adds time, and we’ll tell you before we start. Call (844) 343-6681 to schedule your free estimate.
How do you source the PGT part? We read the series from your glass label or jamb sticker, then match OEM or a spec-equivalent replacement to that series. We don’t stock parts locally or carry them on a truck; the part is ordered to your unit’s spec, and the written price you get covers the part and the install. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with PGT. We also work with KraftMaid, Cambria, and Silestone on the surrounding construction. Call (844) 343-6681 for a free estimate.
If a PGT door or window in your Los Angeles addition is failing, or you’re planning an addition and want the openings done right the first time, call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate. You’ll get a written price before any work starts, background-checked technicians on the job, and our 365-Day Done Right Promise behind the work. A live person answers the phone around the clock.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












