







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Los Angeles Owner’s Guide
If your PGT driveway or paver system has a failing component – a settled section, a cracked or heaved paver, a broken border course, or a driveway that no longer drains away from the garage – we install PGT-compatible driveway and paver work across Los Angeles. Paver driveway installation in Los Angeles typically runs $8,260 to $21,240 installed, and we schedule site visits around your week, not ours. We’re an independent service provider and are not affiliated with PGT.
Most Los Angeles owners find out the hard way. The paver that rocked under a tire all spring finally tips, or a winter storm leaves a puddle sitting against the garage door because the slope gave way. Then the search starts: what’s the actual part, what does it cost, and who shows up with a written price instead of a verbal guess.
Key takeaways
- PGT paver systems fail at the base before they fail at the surface – the visible symptom is usually the last thing to go.
- Los Angeles pricing depends on square footage, base prep, and whether the existing subgrade is reusable.
- You get a written price before any work starts, and every completed project carries our 365-Day Done Right Promise.
Which PGT Models This Applies To

PGT hardscape products show up on a lot of Los Angeles properties under a few different names: interlocking concrete pavers, permeable systems, and bordered driveway packages with matching edge restraint. The part number on the box isn’t what matters most – the joint pattern, the thickness, and the edge restraint system are what determine whether a replacement paver or course actually fits and locks into the field.
Here’s the practical way to identify what you have. Pull the original installation paperwork if you have it, or measure a paver face-to-face across the joint and then measure the thickness at the edge of an exposed unit – most PGT residential driveway pavers land in a standard thickness class, and matching that number is the single most important spec. A paver that’s off by even a fraction in thickness will never sit flush with its neighbors and will rock loose within a season.
Then comes the OEM-versus-equivalent decision. A true PGT-matched paver is the safest route when you need color and dimension to match an existing field, especially on a visible front driveway where a mismatched repair will always read as a repair. A quality equivalent from a documented hardscape line – we work with Belgard and Unilock among others – is a fair choice for borders, utility cuts, or areas out of sight, and it often costs less. What we won’t do is guess: we measure the field, confirm the restraint type, and put the exact part and price in writing before anything gets ordered.
Related brands we also work with include KraftMaid, Cambria, and Silestone for interior projects, though on driveways the hardscape line is what counts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
Paver driveways don’t fail all at once. They telegraph it, and Los Angeles owners who catch the early signs spend far less than the ones who wait for a section to collapse.
- Rocking or loose pavers. A paver that shifts underfoot has lost its bedding sand or the base beneath it has settled. This is the first warning, and a small regrade now prevents a full replacement later.
- Heaving or uneven humps. Frozen or saturated base material pushes up and the surface tents. In Los Angeles, a base that holds water instead of draining is the usual culprit, not the paver itself.
- Ponding water against the garage or at the driveway edge. Water sitting where it shouldn’t means the slope has changed or the drainage path is blocked. Left alone, that water reaches the foundation and the garage threshold.
- Cracked or chipped pavers. Impact damage from a heavy vehicle or a paver that was already compromised. Cracked units admit water straight into the base, which accelerates everything else.
- Failing edge restraint or a spreading border. The edge course holds the entire field in compression. When it pulls loose, the pavers spread outward and joints open up across the whole driveway.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Los Angeles for driveway replacement lands in the $5,900 to $16,520 range, while a full paver driveway installation runs $8,260 to $21,240. Driveway sealing, which protects a healthy surface and slows the joint-sand loss that starts most failures, is $295 to $825. If you’re staying with pavers specifically, the paver number is your headline; the replacement range covers the broader excavation-and-rebuild scenario.
What drives the range: total square footage, how much of the existing base and subgrade can be reused, whether edge restraint and drainage need rework, and the paver line you choose. A flat, well-draining site with a reusable base sits near the bottom. A site with poor drainage, a failed base, or extensive restraint repair sits near the top.
You get the parts-and-labor breakdown in writing before we touch the site – a line-item price that doesn’t move at the door. And the finished work is covered by our 365-Day Done Right Promise: if anything we installed fails within a full year, we come back and correct it at no charge. That’s the guarantee, in writing, in your hand at job close.
DIY or Call Us?
There’s a short list of things an owner can safely do. You can photograph the failing area, measure the affected square footage, and check that your downspouts and grading shed water away from the driveway rather than onto it. You can also watch for the next heavy rain and note where the water pools – that one observation saves us a full diagnostic visit.
Where DIY goes wrong on a paver driveway is the base. Setting pavers on top of a settled or waterlogged subgrade is the single most expensive mistake homeowners make, because the surface looks fine for a season and then fails completely. A paver that rocks isn’t a paver problem – it’s a base problem, and correcting the base means lifting the field, re-compacting, and re-setting it. That’s the work that only holds if it’s done to spec.
If your driveway is rocking, ponding, or spreading at the edges, the honest answer is to have it looked at before a small repair becomes a full replacement. Call (844) 343-6681 and we’ll schedule a free estimate with a written price.
FAQs

How long does a paver driveway last in Los Angeles? A properly installed paver driveway typically lasts 25 to 30 years or more, and the pavers themselves often outlast the base beneath them. In Los Angeles, the base and drainage do more to determine lifespan than the paver surface does, which is why sealing every few years pays off. Call (844) 343-6681 for a free estimate on your driveway.
Can a failing paver driveway be repaired instead of replaced? Yes, often it can. If the failure is limited to one section, a spread border, or a drainage issue, a targeted repair – lifting and re-setting the affected field, re-compacting the base, correcting the slope – is the practical first move. Full replacement only makes sense when the base is failing across most of the driveway. We’ll tell you which one you’re facing, in writing, before any work starts. Call (844) 343-6681 for a free estimate.
How long does a driveway replacement take? Most residential paver driveway replacements run several days to about a week of active work, depending on square footage, base condition, and drainage rework. Los Angeles sites with a reusable base move faster than sites needing full excavation. You’ll get the timeline in the written scope before we begin. Call (844) 343-6681 to schedule your free estimate.
How do you source the PGT-compatible pavers? We identify your existing paver by thickness and field pattern, confirm the edge restraint type, and specify either a true PGT match or a documented quality equivalent from lines like Belgard and Unilock. The exact part and price are in your written quote before anything is ordered. Calls are answered by a live person around the clock at (844) 343-6681.
Our technicians have up to 22 years of experience on driveway and hardscape work, and every job comes with a written price upfront and the 365-Day Done Right Promise behind it.
Call (844) 343-6681 to schedule your free estimate. We’ll walk the driveway, measure what’s there, and hand you a written price – no numbers that move at the door, no surprise invoices, and a signed guarantee at close.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












