A Bradford company - serving Los Angeles, CA
An open living room and dining area after a whole-home remodel
M
Mr-Glass · Los Angeles

Mr-Glass Windows & Doors in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled kitchen with a waterfall island and wood cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Windows & Doors: The Los Angeles Owner’s Guide

We install and repair Mr-Glass windows and doors across Los Angeles, and most full unit replacements land between $5,310 and $17,700 installed, with impact-rated units running $9,440 to $29,500. Door and window hardware and sash repairs cost far less than a full swap, and we’ll tell you which one you actually need before anyone touches the frame. Mr-Glass makes both windows and doors, so the “part” that failed could be a balance, a sash, a hinge, a threshold, or a multipoint lock, and the right fix depends on which assembly you have. Owners usually find out the same way: a window that won’t stay up, a door that drags on the sill in summer, or a lock that turns but won’t catch. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Mr-Glass.

Call (844) 343-6681

Key Takeaways

  • Most Mr-Glass window and door replacements in Los Angeles run $5,310 to $17,700 installed.
  • Identify your exact Mr-Glass series from the label inside the frame jamb before ordering any part.
  • Coastal marine air and inland UV both shorten hardware life here; the fix differs by neighborhood.
  • Every job gets a written price before work starts and our 365-Day Done Right Promise.

Which Mr-Glass Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

Mr-Glass sells across several product lines – single-hung and double-hung windows, sliding patio doors, and entry and French doors – and the parts are not interchangeable between them. The single most useful thing you can do before calling is find the manufacturer label. On windows it’s usually etched into the glass in a corner or printed on a sticker inside the head jamb; on doors it’s often on the hinge-side jamb or the edge of the slab. That label carries the series name, the unit size, and the glass package, which tells us exactly which balance, sash, hinge set, or lock to match.

When we can’t read a label, we measure. Window balances are matched by length and by the stamped number on the metal channel, and door hinges are matched by radius, screw hole pattern, and finish. Skipping the measurement step is where most wrong-part orders come from. On the OEM-versus-aftermarket question: Mr-Glass factory parts guarantee a drop-in fit, but a quality aftermarket balance or hinge from a known hardware line often outlasts the original and costs less. We’ll show you both options in writing and let you choose. We also service KraftMaid, Cambria, and Silestone products, though our parts work here is windows and doors.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Windows & Doors Is Failing

  • The sash won’t stay up, or slams down. The balance spring or spiral has lost tension or snapped. This is the most common window failure we see, and it’s a balance issue, not a glass issue.
  • The door drags or rubs at the bottom corner. A hinge has worn or the frame has shifted with the season. Left alone, the drag wears the sill and the door edge.
  • The lock turns but the door won’t latch. The strike plate or multipoint mechanism has gone out of alignment. This is a security problem, so treat it as urgent.
  • Fog or condensation between the panes. The sealed glass unit has failed and let moisture in. No amount of cleaning fixes it; the unit needs replacing.
  • Drafts or water at the threshold after rain. The weatherstripping, sweep, or sill seal has degraded. In Los Angeles this shows up fast during the first winter storm.

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

Here’s what the work actually costs in the Los Angeles market, installed and with the old unit hauled away:

Job Installed Range (Los Angeles)
Window replacement (standard) $5,310 – $17,700
Impact window installation $9,440 – $29,500
Hardware, sash, or balance repair Quoted per unit in writing

The range is driven by unit size, glass package, and whether the opening needs reframing. You get a line-item written price before any work starts, with no numbers that move at the door. Every install carries our 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. We don’t stock parts or carry them on a truck – we source the correct part to your Mr-Glass model and schedule the work once it’s confirmed in hand.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some checks are safe for an owner. You can read the label, measure the balance channel, note which way the sash hangs, and confirm whether the glass is fogged. Cleaning tracks and re-seating weatherstripping are fine too.

Where DIY goes wrong: window balances are under real tension, and a released coil spring can whip out and cut a hand or hit an eye. Door hinge and lock swaps look simple until the strike alignment is off by a couple of millimeters, and a door that won’t latch is a security gap, not just an annoyance. If your balance has snapped or a lock won’t catch, call us. We’ll walk you through a quote over the phone.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

How long do Mr-Glass windows and doors last in Los Angeles? Most Mr-Glass windows and doors hold up 15 to 25 years, but hardware like balances, hinges, and weatherstripping typically needs attention sooner – often within 8 to 12 years in coastal areas where marine air speeds up corrosion. Call (844) 343-6681 for an exact quote on your unit.

Can the part be repaired instead of replaced? Often yes. A balance, hinge, or lock can usually be swapped without replacing the window or door, which costs far less than a full unit. We’ll tell you honestly when a repair is the right call and when a replacement makes more sense.

How long does the swap take? A hardware or balance repair is usually a same-visit job for a single unit. A full window or door replacement depends on the opening and framing, and we schedule it once the sourced part is in hand.

How do you source the Mr-Glass part? We match your series and label to the correct component, offer OEM and quality aftermarket options with the trade-offs in writing, and confirm the part before scheduling. Estimates are free – call (844) 343-6681.

Get a Written Price on Your Mr-Glass Repair

If a Mr-Glass window or door in Los Angeles has failed, call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate. You’ll get a written price before any work starts, background-checked and uniformed technicians, and our 365-Day Done Right Promise on every job. A live person answers the phone around the clock, and we’ll confirm the right part for your Mr-Glass model before we schedule.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch