







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Los Angeles Owner’s Guide
Mr-Glass-compatible kitchen remodeling in Los Angeles installed by our crews typically runs $16,520 to $53,100, depending on the size of the room, the cabinet and surface package, and how much rough-in the walls force us to redo. We’re an independent service provider, not affiliated with Mr-Glass, and we quote a written price before work starts. Most owners call us after a different symptom picture: a cabinet door that won’t stay shut, a drawer that drags, a countertop seam that has opened up, or a backsplash grout line that cracked within a year of a prior install. If any of those sounds familiar, the problem is usually the substrate and the installation, not the glass or the surface itself.
Which Mr-Glass Models This Applies To

Mr-Glass kitchen packages show up in Los Angeles homes in a few predictable ways: glass-front and mirrored cabinet doors, glass backsplash panels, and framed or frameless cabinet box systems with a factory-spec hinge cut. The model number is stamped or printed on the inside face of the cabinet door, on the drawer box side, or on a label near the hinge plate. Take a photo of that label before you call anyone, including us. It’s the fastest way to confirm whether a replacement door, glass panel, or hinge set will actually fit the existing cut.
Here’s the compatibility gotcha we run into most in older Los Angeles stock: Mr-Glass used more than one hinge bore pattern across its cabinet lines, and a 32mm bore pattern is not the same as the 35mm cup many hardware stores stock. Measuring the cup diameter, the hinge overlay, and the door thickness (usually 16mm or 18mm) tells you what will work. On the OEM-versus-aftermarket question: OEM glass panels are worth it when the frosted or textured finish has to match an adjacent run of cabinets. Aftermarket hinges and drawer slides are usually the smarter call, because the major hardware brands build to tighter tolerances than the original spec. We source whichever version your project actually needs and document the part number on the written quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Cabinet doors that sag or won’t close flush. The hinge screws have pulled out of stripped particleboard, or the hinge overlay has shifted. Soft-close hinges take the most wear in a kitchen that sees daily use.
- Drawers that drag or derail. The slide rail is bent or the cabinet box has racked out of square. In a Los Angeles kitchen with a south-facing window, heat and humidity swings on the box are a common contributor.
- Countertop seams that have opened. A seam that opens means the substrate under it wasn’t flat or wasn’t fastened properly. It’s almost always an installation issue, not a surface material failure.
- Cracked grout or caulk at the backsplash. The glass panel is flexing because the wall behind it isn’t rigid enough. Re-grouting without fixing the wall just buys you another failure.
- Glass panels that rattle or sit proud of the frame. The glazing gasket has shrunk or the panel was cut slightly under size. Either way the seal is compromised and moisture gets behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges we quote in Los Angeles. These are written prices, not estimates that move at the door.
| Project | Installed Price Range |
|---|---|
| Kitchen Remodel (full scope) | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
The range is driven by three things: how much of the existing cabinet box is reusable, the surface package you choose, and how much wall or floor repair is needed once the old material comes out. Parts are itemized separately from labor on the quote, so you can see exactly what a replacement hinge set or glass panel costs against the install hours. Every project carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
Some of this you can safely check yourself. Open and close every door and drawer and note which ones catch. Photograph the model label and the hinge plate. Measure the door thickness and the hinge cup diameter. That’s it. Where DIY goes wrong is at the install: setting a glass-front door on a slightly out-of-square cabinet box will crack the panel or bind the hinge no matter how careful you are, and cutting a backsplash panel to fit a wall that isn’t flat is a job that punishes guesswork. This is also a part of the house where a bad install can put glass under load. If a panel is loose or a door is hanging by one screw, stop using it and call us at (844) 343-6681. We’ll give you a written price before anything is touched.
FAQs

Quality cabinet boxes and glass panels generally hold up for 15 to 20 years, but the hardware is the short-lived piece: hinges and slides typically need attention every 7 to 10 years in a kitchen used daily. In Los Angeles, the bigger factor is the install itself. A flat, fastened substrate extends the life of everything above it.
Often, yes. A sagging door with one stripped hinge screw can be repaired with a hinge plate reinforcement rather than a full door swap, and a single cracked glass panel can usually be replaced on its own. We look at repair first when the cabinet box is sound, because it costs you less and keeps the original finish matched. Call (844) 343-6681 and we’ll tell you straight which route makes sense.
A single door, panel, or hinge set is usually a same-visit job. A full kitchen package running cabinet installation, countertop, and backsplash together is a scheduled project, typically one to three weeks depending on scope and material lead times. You’ll have the schedule in writing before we start.
We confirm your Mr-Glass model from the label and the measured specs, then source the OEM panel or the aftermarket hardware that actually matches the bore pattern. The part number goes on your written quote. We install KraftMaid, Cambria, and Silestone packages too, so the same documentation standard applies whatever your kitchen has in it. Call (844) 343-6681 for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












