







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Los Angeles Owner’s Guide
A Mr-Glass home addition in Los Angeles typically runs $53,100 – $153,400 for a permitted, finished build, and an accessory dwelling unit (ADU) runs $106,200 – $259,600 depending on whether it’s a detached new build, a garage conversion, or an attached unit. These are installed prices, not part prices: framing, rough-in, glazing, finishes, and the permit cycle are all inside the range.
Owners usually discover the problem the same way. The patio door on the addition starts dragging in August. A bedroom over the new slab feels humid while the rest of the house is dry. Or the ADU plan set comes back from the city with a comment about the window schedule, and the glazing that was quoted doesn’t match what Mr-Glass specified for the opening. That’s the moment the questions start: which series is this, what actually failed, and can the part be matched without tearing out the wall?
Which Mr-Glass Models This Applies To

Mr-Glass builds to a window and door schedule rather than a single universal parts line, so the right replacement depends on the series stamped on the unit and the rough opening it sits in. Check three places before you call anyone: the etched or printed label on the glass edge or the jamb, the frame dimensions taken at the interior stop (not the trim), and the sticker on the sash or panel. Those three data points identify the series, the glazing package, and the handing.
The compatibility gotcha is glazing depth. Mr-Glass units spec’d for Los Angeles additions often carry laminated or dual-pane assemblies sized to a specific rebate, and a generic aftermarket sash that fits the opening dimensionally can still sit proud of the frame or bind the weatherstrip. Ask for the assembly thickness in writing, not just the width and height.
On OEM versus aftermarket: OEM guarantees a drop-in fit and preserves whatever manufacturer warranty remains on the unit. A quality aftermarket equivalent can cost meaningfully less and perform well, provided the glazing spec, weep configuration, and finish match. For additions nearing the end of their covered period, the aftermarket path is usually the smarter spend. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Mr-Glass; we source Mr-Glass-compatible assemblies and document exactly what we’re installing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
- Fogging between the panes. The seal on the insulated glass unit has failed and moisture has entered the cavity. It won’t clear on its own, and in Los Angeles the inland heat cycles speed it up.
- Water staining on the drywall below the opening. The sill pan, flashing, or weep path is compromised. Left alone, this reaches the framing behind the addition’s wall.
- Doors and windows that drag or won’t latch. Either the unit has shifted on its shims or the addition’s header has moved. The part is fine; the installation geometry isn’t.
- Condensation on the interior glass in mild weather. A sign the glazing package has lost its thermal performance or the assembly was underspec’d for the room’s humidity load.
- Visible gaps, cracked sealant, or daylight at the frame perimeter. The perimeter seal has opened, which is a water intrusion problem in Los Angeles’s occasional heavy rain months, not a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the work that surrounds a Mr-Glass component in a Los Angeles addition or ADU:
| Scope | Installed range |
|---|---|
| Home addition (full build) | $53,100 – $153,400 |
| ADU construction | $106,200 – $259,600 |
| Garage conversion (ADU path) | $35,400 – $94,400 |
| Window replacement (per opening, typical) | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
What moves the number: whether the opening is a direct swap or requires reframing, the glazing package (laminated and impact-rated cost more), finish matching on the trim, and whether a permit is required for the underlying structural or egress change. We give you a written price before any work starts, itemized parts and labor, and every completed project carries the 365-Day Done Right Promise: if the work fails within a full year, we return and correct it at no charge.
DIY or Call Us?
You can safely check the label, measure the rough opening, photograph the failure, and confirm whether the frame is plumb. That’s information gathering, and it helps us quote accurately.
What you shouldn’t do yourself: reset a shifted unit in a load-bearing opening, cut back flashing on an addition wall, or reframe a rough opening to accept a different assembly. Those are structural and water-management tasks. Get them wrong and you’re repairing drywall, sheathing, and framing on top of the original part. Our technicians have up to 22 years of experience and are background-checked and uniformed, so you know who’s coming through the door. Call (844) 343-6681 to schedule your free estimate; a live person answers around the clock.
FAQs

How long does a Mr-Glass window or door assembly last in Los Angeles? Plan on 15 to 25 years for the insulated glass unit and 20 to 30 for the frame itself, shorter on south- and west-facing openings where UV and heat cycling are hardest. Coastal marine layer humidity accelerates seal failure on poorly ventilated additions.
Can the failed part be repaired instead of replaced? Sometimes. A fogged unit can sometimes be reglazed without replacing the frame, and a dragging sash can often be realigned. A cracked frame, a failed sill pan, or a shifted structural opening cannot be repaired, only rebuilt. Call (844) 343-6681 and we’ll tell you which one you’re looking at.
How long does the swap take? A single glazed assembly is a one-day job. If the rough opening has to be reframed or the surrounding wall opened, plan two to four days, and add permit time on top. We’ll give you the schedule in writing with the price.
How do you source the part? We match your Mr-Glass series from the unit label and rough-opening measurements, then quote both the OEM assembly and a documented aftermarket equivalent so you can compare specs and cost side by side. You approve the spec before we order. We also work with KraftMaid, Cambria, Silestone, and other name-brand materials across our remodeling work.
Call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate on your Los Angeles addition or ADU glazing work. Every price is in writing before any work starts, and the 365-Day Done Right Promise backs the finished job for a full year.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












