







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The Los Angeles Owner’s Guide
We install Mr-Glass-compatible bathroom remodeling here in Los Angeles, and a full bathroom remodel typically runs $10,620 to $33,040 installed, depending on size, fixture tier and how far the rough-in has to move. Mr-Glass itself does not make a “bathroom remodeling” part. What you’re dealing with is a Mr-Glass shower enclosure, shower door, tub-to-shower kit or vanity from their line that has a failed component – a door roller, a hinge, a shower valve cartridge, a seal strip or a shower pan that’s given way – and the rest of the room is usually fine. Owners find us after the door stops tracking, the cartridge drips no matter how hard they turn it, or the caulk line at the pan fails in a way that’s now staining the ceiling below.
Which Mr-Glass Models This Applies To

Mr-Glass has sold bathroom product through big-box channels in Los Angeles for years, which is why the part number you need depends on the series your unit came from, not on the word “Mr-Glass” alone. The three families we see most often in Los Angeles bathrooms are the framed sliding shower door series, the frameless pivoting and bi-fold enclosure series, and the tub-to-shower conversion kits. Each uses a different roller, hinge and bottom track profile, and the parts are not interchangeable between them.
To identify yours, open the door or panel and look for the model sticker on the header rail or the inside face of the fixed glass – a printed label with a series prefix and a length or width code. If the sticker is gone, measure the opening height, the panel width and the glass thickness. Mr-Glass glass is typically 3/16-inch in framed units and 3/8-inch in frameless, and that thickness alone narrows which hinge and seal set you need. The bottom track and the shower valve cartridge each require a measurement too, since Mr-Glass has used more than one valve platform.
On the OEM-or-aftermarket question: for the door hardware, a quality aftermarket roller or hinge matched to your series is fine and often more durable than the original. For the shower valve cartridge, we strongly prefer the OEM part, because the trim and the stop are cut for that exact body and an aftermarket cartridge can leak at the bonnet. We should say plainly that Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Mr-Glass; we work with the product because our customers own it, and we source parts to match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
- The shower door jumps the track or drags at the bottom. That’s almost always a worn roller wheel or a flattened bottom guide, and on a Los Angeles unit it’s usually accelerated by hard water scale building up in the track.
- The door won’t stay closed, or swings open on its own. A pivoting frameless panel with a failing hinge or a cracked glass-to-hinge gasket. Do not force it – a 3/8-inch frameless panel under load can let go without warning.
- The shower valve drips when it’s off, or the temperature wanders. That’s a failed cartridge or seat. In Los Angeles’s water, mineral scale eats the rubber cups inside the cartridge faster than most homeowners expect.
- Caulk and seal strips at the pan or curb are cracked and pulling away. The seal has failed, and water is getting behind the pan or into the framing. This is the one we see turn into a bigger repair most often.
- The shower pan flexes, or you see a soft spot underfoot. That’s a failing pan or a substrate that’s already taken on water. It needs to be opened up, not caulked over.
Replacement Cost & What’s Included

In Los Angeles, the cost depends on how much of the Mr-Glass assembly you’re replacing, and we give you the number in writing before we start. Here’s how the line items run in this market:
| Scope | Installed range |
|---|---|
| Full bathroom remodel (Mr-Glass fixtures and enclosure retained or replaced) | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement (enclosure and pan) | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
The range moves on three things: whether the rough-in stays put or has to relocate, the fixture tier you choose, and whether the failed component took the substrate with it. Every quote we hand you is itemized – the part, the labor to install it, and the disposal – so nothing appears at the door. A failed seal that got into the framing is a different job than a failed roller, and we’ll tell you which one you have before we put a price on it. Your installation is covered by the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are a few things you can safely check yourself. Look for the model sticker, measure the opening and glass thickness, and confirm whether the shower valve is dripping with the handle fully off. Swapping a door roller or a pre-sized seal strip is within reach for a careful homeowner, and we won’t pretend otherwise.
Where it goes wrong: any work involving a glass shower panel under load, the shower valve cartridge, or anything below the pan. A frameless 3/8-inch panel is heavy, mounted under tension, and a slip can break glass or cut a hand badly. The valve cartridge sits behind live plumbing and a bad install leaks into the wall. The pan is a job for a professional because the failure you can see is almost never the whole failure. When you’re ready for a straight number, call (844) 343-6681 for a free estimate.
FAQs

Rollers and hinges typically wear out in 5 to 10 years depending on use and water hardness, and the valve cartridge often needs replacement in 6 to 12 years. Los Angeles water is on the hard side, which shortens the cartridge life compared to softer-water regions. Call (844) 343-6681 for an exact quote on your unit – estimates are free.
Often, yes. A worn roller, a cracked gasket or a failed cartridge can be swapped on its own and you keep the enclosure. A cracked glass panel or a pan with a soft spot cannot be repaired and has to be replaced. We’ll tell you which one you have after we look at it.
A roller, hinge or cartridge swap is usually a couple of hours. A shower enclosure or pan replacement is generally a one- to two-day job once the part is on site. A full bathroom remodel runs longer, and we give you the schedule in writing up front.
We identify your series from the model sticker or measurements, then source the matching hardware or the OEM valve cartridge for your platform. We should say plainly that we don’t claim affiliation with Mr-Glass, and we don’t stock parts on a truck; the part is procured to your unit’s spec. Call (844) 343-6681 and we’ll walk you through what we need to order.
Let’s Get You a Written Price
If your Mr-Glass bathroom fixture has failed, or you’re ready to remodel the room around it and want the project done to spec, Bradford Remodeling Co Los Angeles will put the price in writing before a single tool comes out. We work with a documented roster of name-brand materials – KraftMaid, Cambria, Silestone and others – so specs are traceable, and our technicians have up to 22 years of experience. A live person answers the phone 24/7. Call (844) 343-6681 for a free estimate, and we’ll tell you straight whether you’re looking at a part, a repair or a full remodel.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












