







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Roofing: The Los Angeles Owner’s Guide
Roofing built with Kohler components in Los Angeles typically costs $9,440 to $23,600 for a full replacement, or $470 to $2,125 for a targeted repair, and most repairs are scheduled within a few business days. Kohler makes plumbing fixtures and fixtures-adjacent hardware, not roof shingles, so when homeowners call us about a “Kohler roofing” failure they almost always mean one of two things: a Kohler skylight, roof window, roof drain, or roof-mounted vent component that has cracked or lost its seal, or a roofing system around a Kohler fixture that’s leaking. The tell is usually a water stain on a ceiling below the skylight, a drip line at the roof penetration, or a piece of flashing pulling away from the frame. We install Kohler-compatible components and matching roofing around them across Los Angeles, and we give a written price before any work starts.
Key Takeaways
- Kohler itself doesn’t manufacture shingles – the “Kohler part” in a roofing call is nearly always a skylight, roof window, roof drain, or roof-mounted vent.
- Installed repair pricing in Los Angeles: $470 to $2,125. Full roof replacement with Kohler components: $9,440 to $23,600.
- We’re an independent Los Angeles remodeling contractor, not affiliated with Kohler. Brand names are used to describe the fixtures we install and match.
- Every job gets a written price up front, background-checked and uniformed technicians, and coverage under our 365-Day Done Right Promise.
Which Kohler Models This Applies To

Kohler’s roofing-adjacent catalog runs through skylights (their fixed and vented roof windows), roof windows, roof drains, and roof-mounted bath and kitchen vent terminations. If you’re trying to identify exactly which one you have, look for a metal tag on the skylight frame, the inside of the vent collar, or the underside of the roof drain flange – most Kohler units are stamped with a model and a series number. The vented units and fixed units use different flashing kits, and the flashing is where 8 out of 10 failures start. That’s the compatibility gotcha: the fixture can be fine and the problem is still the flashing it sits in, which is why a straight part swap without inspecting the flashing is almost always a wasted afternoon in Los Angeles.
Once you have the model number, you have a decision: OEM Kohler replacement or a quality aftermarket equivalent. For skylight frames and roof drains, OEM is the right call most of the time – the seal dimensions and mounting pattern match the existing rough opening, so the swap is a couple of hours instead of a framing job. For vent terminations and trim, a quality aftermarket that matches the boot size works fine and saves real money. Kohler’s own factory parts arrive through their dealer network; if you’re calling us, we’ll quote OEM and an equivalent side by side so you can see the delta before deciding. We’re an independent contractor and not affiliated with Kohler, so we have no reason to steer you toward the more expensive part. We also service KraftMaid, Cambria, and Silestone installations in Los Angeles homes, and the same written-price and 365-Day Done Right Promise standard applies on every one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Roofing Is Failing
The five things we hear from Los Angeles homeowners, and what each one usually means:
- A water stain on a ceiling, ceiling tile, or interior wall below a skylight. This is the number one sign. The cause is almost always a failed flashing or a dried-out perimeter seal around the skylight frame – not the glass or the acrylic itself.
- Condensation on the inside of the skylight in the morning. A single pane of cold air between the interior and exterior – Kohler’s double-pane units that have lost their seal fog between the panes. Once that happens, the pane has to be replaced; resealing doesn’t fix an internally failed glazing unit.
- Visible daylight or a draft at the skylight frame edge. The frame has separated from the roof deck or the curb. Usually a flashing-and-caulk failure that started months ago and you’re now seeing the late stage.
- Roof drain backing up or pooling on a low-slope roof section. A Kohler roof drain with a cracked flange or a blocked strainer. Standing water in Los Angeles is a real issue on flat sections of mid-century homes, and standing water will find its way through the smallest gap in a couple of rainy seasons.
- Discoloration or cracking around a roof-mounted vent termination. UV degradation of the rubber boot. The rubber boots on vent pipes typically have a 10- to 15-year life in Southern California sun, and once they crack, water tracks down the vent pipe into the attic.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Los Angeles for the work most of these calls turn into:
- Roof repair, targeted: $470 to $2,125 (flashing, boot, seal, drain flange)
- Tile roof repair around a Kohler component: $710 to $2,950
- Full roof replacement with Kohler components reinstalled: $9,440 to $23,600
- Metal roof installation: $17,700 to $47,200
What drives you toward the top of a range: tile vs. asphalt, whether the deck under the leak has rot, whether the skylight curb has to be rebuilt (common in homes older than 1980), and access – a two-story with a steep pitch costs more than a single-story ranch. The price we quote is the price we hold; if we open up the roof and find something we didn’t see from the ladder, you get a written change order with a number on it before we continue. Every completed job is covered under the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. Parts and labor are broken out line by line on the written quote, so you can see exactly what the Kohler component costs and what the installation costs.
DIY or Call Us?
There’s a short list of things you can safely check yourself. From the ground with binoculars, look for cracked caulk at the skylight frame, curling flashing, or a boot that’s split. Inside the attic with a flashlight, look for a water trail on the underside of the roof deck. That’s where it stops. Roof work means working at height on a slope, and a full roof-plane repair – replacing a skylight, redoing the flashing, or rebuilding a drain flange – is not a homeowner job. We’ve seen more than a few Los Angeles “DIY” jobs around skylights where the seal was applied over wet substrate (the layer the roofing sits on) and the leak came back within a month. We’d rather you call, get a written price, and have it done right the first time.
Call (844) 343-6681 for a free estimate. A live person answers, 24/7 – no voicemail, no callback queue. Background-checked and uniformed technicians on every job.
FAQs

Expect 15 to 25 years for the glazing unit itself and 10 to 15 years for the flashing and rubber boots around it. The Los Angeles sun is hard on rubber and caulk, so the seal around the skylight is what actually fails first, not the Kohler frame or glass. If your skylight is past year 12, budget for a flashing and boot replacement even if it hasn’t leaked yet. Call (844) 343-6681 for a free inspection and written price.
Often yes. A failed perimeter seal, a cracked boot, or a roof drain flange can usually be repaired for $470 to $2,125 rather than replaced. What can’t be repaired is a double-pane glazing unit that’s lost its seal and fogged from the inside – that pane gets replaced, not resealed. We’ll tell you straight which one you’re dealing with after we’re on the roof. Estimates are free, so call (844) 343-6681.
A flashing or boot repair is typically a half-day. A full skylight replacement with curb work is a one- to two-day job depending on the roof pitch and access. A roof drain swap is usually a half-day. We give you a realistic completion window in the written quote – no vague “sometime next week.” Call (844) 343-6681 for a quote specific to your Los Angeles roof.
We pull the model and series number off the existing unit, then quote OEM from Kohler’s dealer network alongside a quality aftermarket equivalent where one exists. You see both prices in writing before anything is ordered. On skylight frames and roof drains we generally recommend OEM because the seal dimensions and mounting pattern have to match the rough opening. On vent terminations, an equivalent boot is fine. Call (844) 343-6681 and have the model number ready if you can – it speeds up the quote.
If your Kohler roofing component has failed, the fastest path to a written price is a phone call. Bradford Remodeling Co Los Angeles gives you a written quote before any work begins, background-checked and uniformed technicians, and a 365-Day Done Right Promise on every completed job – if the work fails inside that year, we correct it at no charge. Call (844) 343-6681 for a free estimate. A real person answers, 24/7.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












