







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Los Angeles Owner’s Guide
ES Windows-compatible roofing installed in Los Angeles typically runs $470 – $2,125 for a targeted roof repair and $9,440 – $23,600 for a full roof replacement, depending on the assembly and pitch involved. We install and service roofing components that tie into ES Windows openings, flashings, and skylight assemblies, with written pricing before any work starts. Most owners find us the same way: a brown ring appears on a ceiling after the first real rain, or a contractor points at a soft deck edge during an unrelated repair.
In Los Angeles, the failure often shows up late because our rain comes in short, heavy bursts. A small flashing gap that would soak a Portland roof all winter can sit dormant here for months, then leak hard in a single February storm.
Key Takeaways
- Installed roof repair in Los Angeles: $470 – $2,125. Roof replacement: $9,440 – $23,600.
- Match the part to the ES Windows series before ordering. Flashings and skylight frames differ between model lines.
- Bradford Remodeling Co Los Angeles is an independent contractor, not affiliated with ES Windows.
- Every completed job carries the 365-Day Done Right Promise, in writing.
- Written price before work starts, every time, with no numbers that move at the door.
Which ES Windows Models This Applies To

ES Windows builds window and door assemblies, and the roofing parts that concern you are the flashings, head and sill details, and skylight or window-to-roof transitions that seal those openings into the roof plane. The right part depends on the series and the rough opening, not the marketing name on the glass. Before anything gets ordered, we pull the label from inside the frame jamb, check the etched glass marking, and measure the rough opening at three points. Model series with wider frames often need a broader pan flashing than a narrow-line window of similar size, and that mismatch is the number-one cause of a repeat leak we get called to fix.
On the OEM-versus-aftermarket call: ES Windows-branded flashings fit like a glove, but a quality aftermarket pan or sill pan built to the same dimensions does the same job for less when the OEM part is on a long lead. We document which part we’re installing so the specification is traceable, and we won’t substitute a part that changes the drainage plane. We’re also the team homeowners call for KraftMaid, Cambria, and Silestone work, so the same written-scope standard applies here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Roofing Is Failing
Here’s what actually shows up on Los Angeles roofs tied to ES Windows openings, and what’s behind each symptom.
- Water staining on the ceiling near a window head. The head flashing has lost its seal or was never lapped correctly, so wind-driven rain pushes behind the window frame.
- Daylight visible around a skylight frame from inside. The frame seal or curb flashing has opened, which means air and water both have a path in.
- Lifted or cracked sealant along a sill or pan flashing. UV exposure across a Los Angeles summer hardens sealant faster than in cooler climates, and once it cracks, the detail is no longer watertight.
- Soft or spongy decking at a window corner. Long-term minor intrusion has soaked the substrate, and soft wood is a structural warning, not a cosmetic one.
- Granule loss or bald patches on shingles below an opening. Water channeling off a failed flashing wears the shingle surface directly beneath it, so the shingle tells you where the leak started.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest ledger for Los Angeles. The number you see is a written price before work starts, not an estimate that drifts once the crew is on the roof.
| Scope | Installed Range (Los Angeles) |
|---|---|
| Roof repair (targeted, one opening or flashing detail) | $470 – $2,125 |
| Tile roof repair | $710 – $2,950 |
| Roof replacement | $9,440 – $23,600 |
| Metal roof installation | $17,700 – $47,200 |
What drives the number: the size of the opening, roof pitch and access, whether decking has to be replaced, and whether the repair is a single flashing detail or the whole plane around it. Labor and parts are itemized in the written quote, never bundled into a lump sum you can’t audit. Every completed job is covered by the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge, and you hold that guarantee in writing at close.
DIY or Call Us?
You can safely check a few things from the ground or the attic: look for water stains on rafters, feel for soft decking with a screwdriver handle (not a probe that punches through), and inspect sealant lines from a ladder only if it’s stable and you stay off the roof surface. Beyond that, roof work around ES Windows flashings is where DIY goes wrong. Getting the lapped order backward, using the wrong sealant, or reusing a compromised pan flashing all create a leak that shows up weeks later, and a fall from a Los Angeles roof is a serious injury. A technician with up to 22 years of experience handles the flashing detail correctly the first time. Call (844) 343-6681 and we’ll walk through what you’re seeing, then schedule a free estimate.
FAQs

Properly installed flashing around an ES Windows opening lasts 15 – 20 years before sealant and materials warrant a recheck, and the roof covering itself runs 20 – 25 years for asphalt. Los Angeles UV and heat are the main shorteners, which is why we inspect flashing at every opening when we’re on the roof. Call (844) 343-6681 for a free inspection and exact numbers.
Often yes. A resealed flashing or a re-lapped pan flashing costs far less than a new assembly, and repair is the right call when the decking and surrounding shingles are sound. We tell you plainly when repair will hold and when it won’t. Call (844) 343-6681 and we’ll give you a written recommendation.
A single flashing or detail repair usually takes a few hours; a partial or full replacement takes one to several days depending on square footage and weather. We schedule the work and tell you the expected span up front. Call (844) 343-6681 to book your free estimate.
We source ES Windows-compatible parts by series and rough-opening measurement, pulling the frame label and marking to match the assembly, and we document the spec on your quote. Where an OEM part has a long lead, we present a dimension-matched aftermarket option and let you choose. Call (844) 343-6681 and we’ll identify what your model needs.
Written by the team at Bradford Remodeling Co Los Angeles. Bradford Remodeling Co Los Angeles is an independent contractor and is not affiliated with ES Windows. Free estimates, written pricing, and the 365-Day Done Right Promise on every completed job. Call (844) 343-6681 for a free estimate.












