







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Los Angeles Owner’s Guide
If you’re pricing kitchen remodeling that ties into an ES Windows opening, expect $16,520 to $53,100 installed in Los Angeles, depending on cabinet run, surface upgrades, and whether the window or door opening gets reframed. We’re an independent contractor, not affiliated with ES Windows, and we schedule estimates on planned work rather than same-day calls. Most owners don’t start with “I need a remodel.” They start with a symptom: a window over the sink that won’t seal, a door-to-deck that’s sticking through the dry season, or a corner where the glass sweats onto new countertops. In Los Angeles, that discovery usually shows up after a June marine-layer stretch or the first Santa Ana wind event of fall, when the gap between glass and frame stops being cosmetic.
Which ES Windows Models This Applies To

ES Windows is a Florida-rooted manufacturer, so the products most Los Angeles homeowners actually encounter are its vinyl and aluminum lines carried through regional distributors: single-hung and slider windows, fixed picture units, and sliding glass doors. The compatibility gotcha is real. ES Windows changed its glazing bead and weatherstrip profiles across production runs, and the window over your kitchen sink may match a unit whose sash dimensions are nearly identical to a later one but whose channel depth is different by a sixteenth of an inch. That’s enough to make a replacement sash not seat, or a screen frame not clip in with the tension it should.
Before we spec anything, we find the label. Glass units typically carry a bump-label or etched mark near the corner edge of the glazing, and frames often have a manufacturer sticker inside the head jamb or on the sash face. Where the label is gone, we measure the visible glass, the frame opening, and the sash thickness, then match against measured drawings rather than guess from a photo. On the OEM-vs-aftermarket call: factory parts guarantee fit to the original profile, while quality aftermarket equivalents are common on older or discontinued units and often cost less. Either way, we write the brand, model reference, and dimensions into the scope before the order goes out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Kitchen Remodeling Is Failing
These are the failures we see most often when a kitchen remodel runs into an ES Windows product that’s reached the end of its service life:
- Condensation between panes: The seal on the insulating glass unit has failed, letting moisture in. In Los Angeles this often shows up on north-facing units after the June gloom season, when interior humidity rises while the exterior stays cool.
- Sticking sashes or a door that drags: Vinyl expands and contracts across a Los Angeles year ranging from cool coastal mornings to 100-degree afternoons, and older rollers, tracks, or pivot shoes wear out. When a sliding door needs a shoulder to close, the hardware is usually the culprit, not the whole unit.
- Drafts or visible light around the frame: Worn weatherstrip or a failed perimeter seal at the rough opening. You’ll feel it most on windy sides of the house, and it’s the leak that quietly drives up your cooling bill.
- Fogging, scratches, or a hazy film on the glass: Surface damage or sealant breakdown on the glazing itself, often from repeated cleaning with the wrong product or from age.
- Water staining at the sill or drywall near the window: This is the one to take seriously. It can mean a leaking pan flashing or missing sill pan, and that’s a framing problem, not a window problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work looks like in writing, price first, before anything starts:
| Scope | Installed Range (Los Angeles) | What Drives the Number |
|---|---|---|
| Full kitchen remodel | $16,520 – $53,100 | Cabinet run, surfaces, layout changes, window or door opening work |
| Small kitchen remodel | $10,620 – $23,600 | Galley or compact layout, minimal reconfiguration |
| Cabinet installation | $4,720 – $15,340 | KraftMaid or Wellborn boxes, drawer count, specialty hardware |
| Countertop installation | $2,360 – $7,670 | Cambria or Silestone slabs, edge profile, sink cutouts |
| Backsplash installation | $945 – $2,950 | Tile selection, layout pattern, linear feet |
| Kitchen island installation | $3,540 – $11,800 | Size, surface type, whether plumbing or electrical runs to it |
The range widens with surface grade, cabinet line, and how much the window side of the kitchen has to be reframed to accept a new opening. Every job gets a written price before we lift a tool, and the 365-Day Done Right Promise covers the completed work: if it fails within the year, we come back and correct it at no charge. The full-year written guarantee is in your hand at close, alongside a clean site and a signed scope.
DIY or Call Us?
Some things you can check yourself, and should: run a hand around the window frame on a windy day to find drafts, look for fog between the panes with a flashlight at dusk, and check the sill for soft wood or staining after rain. What you shouldn’t do is try to re-glaze, re-seal, or reframe an opening that involves the kitchen wall structure. The glass panels are heavy, and a dropped sash or a failed seal on a refitted unit can send water into framing for months before you notice. If the drain pan or flashing is the problem, that’s structural and belongs to a trained crew.
Where DIY does go wrong most often is on the sliding door: people replace the rollers and still get drag, because the track itself is worn or the door frame is out of square. Call (844) 343-6681 for an exact quote. Estimates are free, and a live person picks up.
FAQs

How long does an ES Windows unit typically last? A well-installed vinyl unit commonly runs 15 to 25 years in Los Angeles, though the coastal marine layer shortens the life of perimeter sealant and the inland heat cycle speeds up hardware wear. If you’re past year 15 and the seal has failed, replacement is usually the better spend.
Can it be repaired instead of replaced? Sometimes. A failed glass seal can be reglazed with a new insulating unit, and a sticking slider is often just rollers and track. If the frame or sash is cracked or the pan flashing is leaking, repair won’t hold and replacement is the right call. Call (844) 343-6681 and we’ll tell you which one you’re looking at.
How long does the swap take? A single window replacement is a few hours; a sliding door is most of a day. If the opening has to be reframed inside a kitchen remodel, the window work is folded into the larger schedule and quoted as part of it. Call (844) 343-6681 to schedule your free estimate.
How do you source the ES Windows part? We don’t carry parts on a truck. We identify the model from the label or by measuring the unit, write the brand and dimensions into the scope, and order through the distributor channel so the spec is traceable. We also work with KraftMaid, Cambria, and Silestone cabinetry and surfaces when the kitchen scope goes beyond the window itself.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












