







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Home Additions & ADU: The Los Angeles Owner’s Guide
If you’re adding a home addition or an ADU to a Los Angeles house that already has ES Windows glazing in place, the new opening has to match the existing window line, not just fit roughly. Expect to spend $53,100 – $153,400 for a home addition in Los Angeles and roughly $106,200 – $259,600 for a full ADU, with ES Windows-compatible units and flashing detailed on the written scope before we start. We match the series, glass package and frame profile so the addition reads as part of the house instead of a bolt-on.
Owners usually figure out something’s wrong the first hard rain or the first hot week. Water shows up at the new wall-to-window joint. The glass fogs between the panes. The addition runs hotter than the rest of the house even with the AC working. Or a slider starts dragging because the rough opening wasn’t squared to the tolerances ES Windows specifies. When the part that failed is a window or door in an addition, the fix is a compatibility and installation question as much as a parts question.
Key takeaways
- Addition and ADU pricing in Los Angeles runs $53,100 – $153,400 and $106,200 – $259,600 respectively, and glazing is a line item you should see on the written quote.
- ES Windows compatibility is about series, frame profile and rough-opening dimensions, not just size on a tape measure.
- We’re an independent contractor, not affiliated with ES Windows, and we source the correct window for your model line.
- Every completed project carries the 365-Day Done Right Promise, in writing.
Which ES Windows Models This Applies To

ES Windows covers several product families, and a home addition or ADU ties into whichever line is already on the house. Vinyl single-hung and double-hung units, horizontal sliders, casement and awning windows, and sliding or French patio doors all appear in Southern California homes. The series matters because frame dimensions, jamb depths, weep systems and glass stops differ between product families. A window that looks identical from the street may not share drainage or glazing stops with the one two rooms over.
Find the identification first. ES Windows typically etches a glass bug in the corner of the IG unit, and the frame may carry a sticker or stamp with the series and manufacturing code. Measure the visible glass, the frame and the rough opening separately. Then decide OEM versus a quality equivalent. For an addition, an exact ES Windows replacement preserves the sightlines and glass package. Where a matched unit isn’t available or the schedule doesn’t allow it, a quality aftermarket window built to the same opening and performance spec is a legitimate choice, as long as it’s documented on the written scope. We put the model, series and glass spec in writing so nothing gets swapped mid-job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Home Additions & ADU Is Failing
Additions and ADUs fail at the edges before they fail in the middle. These are the symptoms we see most in Los Angeles, and what’s actually going on under each one.
- Water at the wall-to-window joint after rain. Usually a flashing or sill-pan issue in how the new window ties into the wall assembly, not the window itself. ES Windows units need the head flashing lapped and the sill pan detailed before the window goes in, and skipping that step is the most common cause of an interior stain.
- Condensation or fogging between the panes. The insulated glass seal has failed. In a Los Angeles addition, that often shows up on the sun-facing elevation first. Once the seal is gone the unit has to be replaced, not resealed.
- Drafts or heat gain the rest of the house doesn’t have. The glass package on the addition doesn’t match the performance spec of the existing ES Windows, or the frame wasn’t air-sealed at the rough opening. A Los Angeles ADU that runs hotter than the main house is usually a glazing and sealing problem, not an HVAC problem.
- A slider or French door that drags or won’t latch. The rough opening was framed out of square, or the unit was set before the opening was checked. Sliding hardware on ES Windows doors is tolerant of small tolerances, not of a racked frame.
- Visible gaps at the trim or a soft spot in the drywall under a new window. Air and water are getting behind the assembly. In Los Angeles this often means stucco wasn’t back-flashed correctly around the new opening, so the wall cavity catches moisture for months before it shows inside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Costs below are installed ranges for Los Angeles, not part-only pricing. A window or door replaced within an addition or ADU typically runs $5,310 – $17,700 for standard window replacement, and $9,440 – $29,500 for impact-rated units where the addition requires them. When the failing window is part of a larger addition or ADU scope, you’ll see the glazing as a line item within the overall $53,100 – $153,400 addition range or the $106,200 – $259,600 ADU range.
| Scope | Installed range (Los Angeles) |
|---|---|
| Window replacement (standard) | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
| Home addition (full scope) | $53,100 – $153,400 |
| ADU construction | $106,200 – $259,600 |
What’s included in the range: the unit itself, flashing and sill-pan detailing, air-sealing, trim, stucco patch where the exterior is opened, and haul-away. What drives the number up is impact-rated glass, oversized units, a second-story opening, or structural repair found once the wall is opened. We put every line in writing before work starts so the number doesn’t move at the door. All completed work carries the 365-Day Done Right Promise: if it fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely look at the glass for the etched bug, photograph the frame label, and measure the window. That’s diagnostic work, and it helps us source the correct ES Windows part faster. Replacing a window inside an addition is a different job. Setting a window in an exterior wall means flashing, sill pan, air barrier and stucco back-flashing all have to be right, and on a second-story opening there’s fall risk. Where an opening sits at the top of a wall or on a steep roof, that’s a trained, insured crew’s work. Getting the flashing wrong is the failure that shows up six months later as a stain on the ceiling.
If the failing window is part of your addition or ADU and you want it done right the first time, call (844) 343-6681. A live person answers 24/7, and you’ll get a written price before any work starts.
FAQs

Plan on 20 – 25 years for the frame and hardware and 10 – 15 years for the insulated glass seal in a Los Angeles market, where UV exposure on a south-facing elevation is the main driver of early seal failure. When the seal fails, the unit is replaced, not resealed. Call (844) 343-6681 for a free estimate on a replacement window.
Sometimes. A dragging slider, a worn weatherstrip or a failed latch can be repaired with the correct part for your series. Fogged insulated glass and racked frames cannot, and those need replacement. We’ll tell you which you’re looking at before quoting. Call (844) 343-6681 to schedule a free assessment.
A single in-window replacement is typically a half-day to a full-day job once we have the correct ES Windows unit in hand. Larger openings, second-story work or impact-rated units run longer. The schedule goes in the written scope before we start.
We identify the series from the glass bug and frame label, then order the matching unit from the appropriate supplier for that line. We document the model, glass spec and rough-opening dimensions on the written scope, so there’s no question about what gets installed. Where an exact match isn’t available, we offer a quality equivalent built to the same performance spec and note it in writing. We’re an independent contractor, not affiliated with ES Windows.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












