







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Los Angeles Owner’s Guide
If you own a home with ECO Window Systems products and you’re planning a bathroom remodel in Los Angeles, the work typically runs $10,620 to $33,040 fully installed, depending on bathroom size, fixture grade and whether the layout moves. A standard hall bath with a tub-to-shower conversion and new vanity lands near the middle of that range; primary suites with frameless glass and Cambria surfaces push toward the top. Because a bathroom remodel is planned work with permits and inspections, it’s scheduled, not same-day.
Most owners start looking at this page after a smaller failure: a fogged ECO window over the tub, a shower valve that drips, or a vanity that swelled after a slow leak. What began as a repair question usually becomes a conversation about doing the whole room once, correctly, with the window system and the wet-wall finishes coordinated instead of patched.
Which ECO Window Systems Models This Applies To

ECO Window Systems makes a range of vinyl window and door products, and bathroom remodels in Los Angeles usually touch the window over the tub or shower, not just the fixtures. Identifying your unit takes two minutes. Open the sash and look for the manufacturer label in the window jamb channel (often on the upper frame or the sill), then measure the visible glass and the rough opening. Those two numbers, plus the glass package code on the label, tell us which ECO series we’re matching.
The OEM-versus-aftermarket decision matters here. On an ECO vinyl unit, a bathroom requires tempered or laminated glass and a finish that survives constant humidity. OEM replacements keep the original frame profile and drainage; aftermarket equivalents can match performance but often change the sill or the weep system, and in a wet-wall opening that difference shows up as pooling. We’ll tell you straight which route fits your opening. We’re an independent remodeling contractor, not affiliated with ECO Window Systems, so our job is matching the part and the finish to what’s actually on your wall.
We also work alongside KraftMaid and Cambria specifications when the remodel brings cabinetry and countertops into the same room. The window and the vanity have to agree on clearance before anything gets ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Bathroom Remodeling Is Failing
- Fogging between the panes. The seal on the insulated glass unit has failed and moisture has entered the air space. In Los Angeles’s dry heat followed by cool coastal nights, that cycling stresses seals on the south- and west-facing windows first.
- Water on the sill after a shower. Usually a failed weep channel or deteriorated sealant at the frame-to-tile joint. Left alone, the moisture reaches the substrate behind the tile.
- A drip at the shower valve. The cartridge or seat has worn and water is bypassing the seal. It’s a small part with a large consequence: the leak hides behind the wall until the drywall or the vanity cabinet shows it.
- Soft or discolored drywall near the tub. Water has gotten behind the tile or the window surround and the substrate is degrading. This is the point where a repair becomes a remodel.
- A sticking sash or corroded hardware. Humidity has reached the operating hardware, and the window no longer seals tight. In a bathroom that means conditioned air leaking out and moisture creeping in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full bathroom remodel in Los Angeles runs $10,620 to $33,040. A small bathroom remodel runs $5,900 to $14,160. If the failure centers on the shower, a walk-in shower installation runs $5,310 to $14,160, a tub-to-shower conversion runs $4,130 to $11,800, and a straight shower replacement runs $3,540 to $10,030. A vanity on its own runs $945 to $3,540.
What moves the number: whether the layout moves (drains and supply lines relocate), the glass package on the window, tile and surface grade, and whether the substrate turns out to be drywall rather than cement board. Every price is written before any work starts, line by line, with parts and labor separate. Completed work carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge.
DIY or Call Us?
Some of this is safe to check yourself. You can identify your ECO window’s label, measure the glass, wipe and inspect the sill for pooling after a shower, and watch the shower valve for a drip with the water off. That’s diagnostic work, not repair work.
Where DIY goes wrong is at the wet wall and the window opening. Opening the wall around a shower valve means cutting into the waterproofing, and re-sealing a tile-to-frame joint by hand rarely holds the moisture barrier intact. The window surround is the same story: the flashing and drainage have to be continuous, or the next leak starts where the last one did. This is the part of the job where a trained professional protects both the substrate and your guarantee. Call (844) 343-6681 for a free estimate, and a live person answers, day or night.
FAQs

A well-installed insulated glass unit typically holds its seal for many years, and a quality shower cartridge similar. In Los Angeles, the real variable is sun exposure and moisture cycling on the west-facing walls, which can shorten seal life. When it goes, call us for a free estimate.
Often yes, and we’ll say so. A fogged insulated unit can be replaced in the existing frame, and a leaking cartridge is a small part swap. Once the substrate behind the tile is wet, though, replacement becomes the honest answer. Call (844) 343-6681 for an exact quote, estimates are free.
A cartridge or glass-only unit swap is a short visit. A full bathroom remodel in Los Angeles runs a few weeks depending on scope, permits and inspection timing. We give the schedule in writing up front. Call for a free estimate.
From the manufacturer label in your window jamb and the measured opening, matched to the correct ECO series and glass package. We don’t carry parts on a truck or claim stock; the part is ordered to your unit’s spec, verified before installation. Call (844) 343-6681 to get started.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












