A Bradford company - serving Los Angeles, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Dvele · Los Angeles

Dvele Kitchen Remodeling in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled staircase with wood treads and a slim metal railing
A low-threshold walk-in shower with a bench and grab bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Kitchen Remodeling: The Los Angeles Owner’s Guide

We install Dvele-compatible kitchen remodeling in Los Angeles, and a full kitchen typically runs $16,520 to $53,100 installed. For a failing or failed component, we schedule a free estimate and a written price before any work begins. Owners usually find the failure the slow way: a cabinet door that hangs a few millimeters off at the corner, a drawer that catches halfway out, a countertop seam that has opened enough to catch a fingernail. On a Dvele install these show up as fit and finish problems, not structural ones, and catching them early keeps a small correction from turning into a cabinet run replacement.

Call (844) 343-6681

Key Takeaways

  • Dvele kitchen work in Los Angeles typically lands at $16,520 to $53,100 installed.
  • Fit-and-finish failures are common and fixable; the component swap is often a one-visit job.
  • Every completed project carries the 365-Day Done Right Promise in writing.
  • Bradford Remodeling Co Los Angeles is an independent contractor, not affiliated with Dvele.

Which Dvele Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Dvele builds prefabricated and panelized homes, so the kitchen cabinetry and millwork arrive as a specified package tied to the model line rather than to a generic cabinet catalog. That changes how you match a part. On a conventional kitchen install, a box store can sell you any 24-inch base cabinet. On a Dvele kitchen, the cabinet depth, the scribe trim at the wall, and the filler widths are set by how the panelized walls actually went together on site. Two homes from the same Dvele model line can differ by a quarter inch at the wall, and that quarter inch decides whether a replacement face frame or a full cabinet box is the right answer.

Start with the model identification plate, usually near the electrical panel or in the mechanical closet, and the kitchen cabinet layout sheet that came with the home documents. Photograph both. Then measure the actual opening: height, width, and depth at three points, because a prefab kitchen is rarely perfectly square once it’s sitting on a real foundation. Those three measurements matter more than the model number for a fit correction.

The OEM-versus-aftermarket call is straightforward. Dvele does not run a retail parts counter, so a replacement cabinet door, drawer box, or trim piece usually means matching the original specification with an equivalent from a documented manufacturer. KraftMaid and Wellborn both build door styles and box sizes that match common panelized kitchen specifications, and we verify the door profile, overlay, and hinge bore pattern against what’s in your home before ordering anything. For surfaces, Cambria and Silestone both carry slab and edge specifications that hold up against Dvele’s documented countertop specs. What we do not do is claim to carry Dvele parts on a truck or keep Dvele stock in a warehouse. We source and specify against your measurements, then install.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Kitchen Remodeling Is Failing

  • A cabinet door that won’t stay square in the opening. Usually a hinge plate that has lost bite in the panel, or a door that has warped from humidity cycling. In Los Angeles, the swing between dry Santa Ana weeks and coastal marine layer does more cabinet damage than most homeowners expect.
  • A drawer that catches or drags halfway out. The under-mount glide has failed on one side, or the drawer box has racked out of square. Racking usually traces back to a box that was slightly under-torqued at install.
  • A countertop seam that has opened or gone uneven. Adhesive failure at the seam, or substrate movement under a slab that was set over a panelized cabinet run with more deflection than a standard build.
  • Backsplash tile or caulk lifting at the counter. Movement at the counter-to-wall joint, made worse by seismic settling that is routine in Los Angeles homes and rarely shows up as a visible crack elsewhere.
  • A kitchen island that rocks or feels loose at the toe kick. The island was anchored to the subfloor but not shimmed correctly, and the fasteners have backed out over time. This one is worth checking before it stresses a stone island top.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A garage converted into a guest room and home office

Installed pricing in Los Angeles, with the part, labor, and finish correction included:

Scope Installed Range
Kitchen remodel (full) $16,520 – $53,100
Small kitchen remodel $10,620 – $23,600
Cabinet installation $4,720 – $15,340
Countertop installation $2,360 – $7,670
Backsplash installation $945 – $2,950
Kitchen island installation $3,540 – $11,800

What drives the range: how many components are affected, whether the wall finish has to come back out to reach the substrate, and whether a countertop has to come off to get at the cabinet run beneath it. A single failed door is at the low end. A cabinet run plus countertop plus backsplash sits in the middle. A full kitchen where the layout is being corrected is at the top.

We give a written, line-item price before any work starts. No number moves at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge, in writing, signed and in your hand at job close.

DIY or Call Us?

Some of this you can check safely. You can photograph the model plate, measure your openings, and tighten a hinge screw that has backed out. That is the ceiling for most homeowners, and it’s a real ceiling. Adjusting a hinge plate that has lost bite means either a longer screw into sound material or relocating the mounting hole, and getting that wrong strips the panel for good.

What we’d steer you away from: pulling a countertop to chase a seam or a substrate issue, cutting back a panelized wall to reach a stud, or re-anchoring an island without confirming what’s under the subfloor. A Dvele kitchen is built as a system, and one component ties into the next. Stone counters are heavy and crack when lifted unevenly, and a backsplash done wrong is a water path into the cabinet below. Our technicians have up to 22 years of experience, they arrive background-checked and uniformed, and the crew you meet is the crew on your job.

Call (844) 343-6681 for a free estimate. A live person answers, day or night.

FAQs

A finished basement family room with a media wall and wet bar

How long should a Dvele kitchen component last before it fails? Most cabinetry and millwork in a Los Angeles home should hold ten to fifteen years before a correction is due, and countertops longer. Los Angeles’s dry-to-damp humidity swing shortens that window on cabinet doors and seam adhesive more than it does on stone or tile, which is where we see the earliest failures.

Can a failing Dvele kitchen component be repaired instead of replaced? Often, yes. A door that is out of square can usually be re-hung with new hinges, and a drawer glide can be swapped without touching the drawer box. We tell you honestly which call is cheaper once we’ve measured, rather than assuming the bigger job. The written price covers what needs doing, not what pays best.

How long does the swap take? A single door, drawer, or hinge correction is a one-visit job, usually under two hours. A cabinet run with countertop and backsplash is a multi-day project. A full kitchen remodel runs weeks, and the written scope gives you the day count before we start.

How do you source the Dvele part? We match against your measurements and original specifications, then order from a documented manufacturer whose door profile, box size, and finish match what’s in your home. KraftMaid and Wellborn for cabinetry, Cambria and Silestone for surfaces, Kohler and Moen for fixture replacements. Every material carries manufacturer specs and a warranty that backs our own guarantee.

Will the price change once work starts? No. The Garrison Standard requires a written price before any work begins, and it doesn’t move. If we find something behind the finish that genuinely changes scope, you hear about it in writing before we continue, and you approve it. Nothing gets done to your home that you didn’t agree to first.

Do you pull permits for kitchen work in Los Angeles? Where the scope requires it, yes. Countertop and cabinet replacements usually don’t trigger a permit; moving plumbing or electrical in a kitchen does. We flag it in the written scope so you know before work starts what’s being pulled and what isn’t.

Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Dvele. We also work on KraftMaid, Cambria, and Silestone installations throughout Los Angeles. Call (844) 343-6681 for a free estimate. Whether you’re in Sherman Oaks, Silver Lake, or anywhere else in Los Angeles, the price comes in writing first.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled primary suite with built-in wardrobes and a window seatA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelves

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch