A Bradford company - serving Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Delta · Los Angeles

Delta Home Additions & ADU in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Home Additions & ADU in Los Angeles: The Owner’s Guide

Home additions and ADU work tied to Delta systems in Los Angeles typically runs $53,100 – $153,400 for a home addition and $106,200 – $259,600 for a detached ADU, with the exact figure set by a written quote before any work begins. Most Los Angeles owners discover a problem the same way: a finished room over the garage starts feeling soft underfoot, a permitted addition from years back shows a crack running along the seam where it meets the original house, or a garage conversion fails inspection because the structure was framed to shed-load standard when the plans called for living space. These are the symptoms that send people looking for the right part or the right fix, and they usually don’t announce themselves until the rainy season does.

Call (844) 343-6681

Which Delta Models This Applies To

A tile setter installing wall tile in a shower

Delta’s structural and connector line covers a broad catalog, and the part you need depends on whether you’re tying a new addition into the original framing, reinforcing a header over an opening, or anchoring an ADU to its foundation. Before ordering anything, pull the model or series number off the original label or the stamped plate on the component: it’s usually stamped into the metal, printed on a sticker near the connection point, or listed on the permit drawings if the addition was permitted. Measure the existing member it connects to; a 1/16-inch mismatch on a hanger or strap will either not seat or will seat with play, and play is what fails.

OEM or aftermarket

Delta OEM parts match the original spec exactly, which matters most on load-bearing connections where the stamped capacity is what your inspector reads. A quality aftermarket equivalent from a recognized manufacturer can carry the same rating and cost noticeably less, but only if the load rating and galvanizing spec match. On a Los Angeles addition, don’t take a seller’s word for it; check the stamp. We work with documented, name-brand materials throughout, including KraftMaid, Cambria, and Silestone for the finish side of an ADU build, so every spec on the job traces back to a manufacturer sheet rather than a guess.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Home Additions & ADU Is Failing

  • Soft or bouncy floor over the addition. A connector that has loosened or corroded lets the joist move, and movement shows up as deflection. In Los Angeles, marine air near the coast accelerates corrosion on any hardware rated below hot-dip galvanized.
  • Cracks at the seam between addition and original house. A failed strap or tie means the two structures are moving independently. Hairline is normal; a crack you can slide a nickel into is not.
  • Water staining or rust bleed at the connection. Corrosion is the most common failure on exterior structural hardware, and rust streaks on stucco below a hanger are the tell. Coastal Los Angeles conditions make this a five-to-ten-year reality, not a twenty-year one.
  • Squeaks that appear only in Santa Ana wind events or after a rain. This points to movement at a connection that has lost tension. A strap that has stretched or backed off will open up under lateral load before it shows any visible damage.
  • A failed inspection on an unpermitted or older ADU. Inspectors in Los Angeles read the connector stamp against the engineered plans. A mismatched or unrated part fails, and the fix is a documented replacement, not a patch.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

The listed ranges above reflect actual Los Angeles market numbers and are the numbers we quote. A home addition at $53,100 – $153,400 and an ADU at $106,200 – $259,600 cover structural framing, connection hardware, permits and inspection, and finish work to the documented spec. What drives the range: square footage, whether the ADU is attached or detached, foundation type, and how much MEP rough-in runs through existing walls. A garage conversion at $35,400 – $94,400 sits lower because the shell exists. Every figure comes as a written line-item quote before work starts, with no numbers that move at the door, and the completed work is covered by the 365-Day Done Right Promise, which corrects any failure within a full year at no charge to you.

DIY or Call Us?

You can safely check the label and serial number on your existing connector, photograph the connection point, and compare the stamp against the permit drawings. Do not attempt to remove or replace a structural connector on a load-bearing connection yourself. When you pull a strap that’s carrying part of a roof or an addition, the load has to go somewhere, and the wrong sequence can drop it. That’s a licensed, insured crew’s job, and in Los Angeles where an inspector will read the stamp, it’s also the only way the work passes. Background-checked, uniformed technicians will tell you exactly who is arriving before they do. Call (844) 343-6681 to schedule your free estimate.

FAQs

An open living space after a whole-home remodel

How long does Delta home addition or ADU hardware last in Los Angeles? Structural connectors rated for exterior use with proper galvanizing typically hold fifteen to thirty years, but in coastal Los Angeles marine air the corrosion clock runs faster, so inspect every three to five years. Call (844) 343-6681 for a free inspection and estimate.

Can a failing connector be repaired instead of replaced? Sometimes a tightened or re-seated connection holds, but only when the hardware is intact and unrated movement hasn’t already damaged the framing. If there’s corrosion or visible cracking, replacement is the correct call. Call for a free estimate to know which situation you’re in.

How long does the swap take? A single connector replacement is a same-day job once the part is matched and on site; a full addition or ADU timeline is set by scope and permit schedule and written into the contract. We walk the schedule with you before work starts.

How do you source the part? We order from the manufacturer’s spec sheet matched to your model number, and we verify the load rating and finish against your permit drawings before install. We don’t carry stock or parts trucks; every part is ordered to your job. Call (844) 343-6681 for a free estimate.

Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Delta. When you’re ready for a written price and a crew that shows up, call (844) 343-6681 for your free estimate. We answer with a live person every time, and The Garrison Standard puts every price and guarantee in writing before a single tool comes out.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA remodeled family room with new windows and a window seatA wide opening with a new beam where the kitchen wall was removedA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet bar

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch