







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Fence Installation: The Los Angeles Owner’s Guide
We install CWS-compatible fencing across Los Angeles, and most residential CWS fence installation projects run $4,130 to $10,620 installed, depending on linear footage, material, and site conditions. Aluminum runs toward the top of that range; vinyl sits lower. We can usually schedule an assessment within a few days, and we give you a written price before any work starts.
Owners typically discover a fence problem the same way: a gate starts dragging, a post feels loose in the hand, or a windstorm pushes a panel out of plumb. In Los Angeles, the sun and the Santa Ana winds do the damage slowly and then all at once. By the time a post leans, the footing has usually been compromised for a season or two. That’s the moment to get eyes on it.
Which CWS Models This Applies To

CWS builds fencing in several material lines, and the part that fails first depends on which one you own. Vinyl systems fail at the post-to-rail connection and at the gate hinge screws. Aluminum systems fail at the post footing and at the latch hardware. Before we quote anything, we identify your specific CWS line by checking the post cap profile, the rail dimensions (most residential CWS rails run 1-5/8″ to 2″ in profile), and any manufacturer stamp on the inside face of a rail or on the post itself.
The OEM-versus-aftermarket decision matters here. CWS replacement posts and rails are available through the manufacturer’s dealer network, but lead times in Los Angeles can stretch when a specific color or profile is backordered. Quality aftermarket equivalents exist for most hardware (hinges, latches, post caps), and we’ll tell you plainly which parts need to be OEM for a proper fit and which don’t. We don’t stock parts and we don’t carry them on a truck; we source what your specific CWS system needs and bring it to the job.
We’re an independent service provider. We’re not affiliated with CWS. What we know is how their systems go together and what fails in Southern California conditions.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Fence Installation Is Failing
- Posts leaning or rocking. The concrete footing has cracked or the post has rotted below grade. In Los Angeles, soil that expands and contracts with our dry-wet cycles stresses footings year after year.
- Gate dragging or sagging. Hinge screws have pulled from the post, or the post itself has shifted. A gate that drags is a gate that will eventually tear free of its frame.
- Rails pulling out of posts. The rail-to-post connection has failed, either from hardware corrosion or from the post material splitting. This is common on vinyl systems after eight to ten years of UV exposure.
- Panels out of plumb after wind. Santa Ana winds put lateral load on fence panels, and a footing that was marginal when installed will show it. One storm is often all it takes.
- Visible rust or corrosion at hardware. Salt air and marine layer humidity accelerate corrosion on cheap hardware. Once a hinge or latch is compromised, the gate is a liability, not a barrier.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Los Angeles from us runs $4,130 to $10,620 installed. Vinyl fence installation lands in that same range. Aluminum fence installation runs $4,720 to $11,800. What drives the number: linear footage, post spacing, gate count, whether old fence and footings need removal, and slope. A flat lot is cheaper than a hillside; a single gate is cheaper than three.
Every price we give is written before any work starts. That number covers parts, labor, and cleanup. No change orders at the door. Every completed fence carries our 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge. If a post shifts or a gate sags within the year, that’s on us.
We also work with documented name-brand materials across our remodeling work, including KraftMaid, Cambria, and Silestone for interior projects. Fencing is its own discipline, and we quote it on its own terms.
DIY or Call Us?
You can safely check a few things yourself: push on each post to see if it moves, look at the gate hinges for pulled screws, and check the rail connections for gaps. Those checks tell you whether the problem is hardware (often fixable) or footing (usually not).
Where DIY goes wrong is at the footing. Digging out and re-pouring a post footing on a fence line is heavy, precise work, and a fence that isn’t set plumb and at the right depth will lean again within a season. We’ve re-set footings that a homeowner tried to fix and made worse. If the post is moving, that’s the point to call. Call (844) 343-6681 and we’ll give you a written price for the repair or replacement.
FAQs

How long does a CWS fence last in Los Angeles? Most CWS vinyl systems hold up 10 to 15 years in Southern California before UV degradation and footing movement start showing; aluminum systems often go longer if the hardware is maintained. The footing, not the fence material, is usually what determines lifespan here.
Can a failing CWS fence be repaired instead of replaced? Yes, often it can. If the posts are sound and only the hardware or a single panel has failed, a targeted repair is the right call. If the footings are compromised across multiple posts, replacement is usually the better number. We’ll tell you which you’re looking at, with a written price for both.
How long does a fence replacement take? A typical residential fence replacement in Los Angeles takes two to four working days, depending on linear footage, gate count, and whether old footings need removal. We schedule it, show up when we say, and leave the site clean.
How do you source the CWS parts? We identify your specific CWS line by the post and rail profile and source OEM parts where fit matters and quality aftermarket equivalents where it doesn’t. We don’t stock parts and don’t carry them on a truck; we order what your system needs and bring it to the job. Call (844) 343-6681 to schedule a free estimate.
If your CWS fence is leaning, dragging, or has a gate that won’t close, call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free estimate. We’ll give you a written price before any work starts, and every job is backed by our 365-Day Done Right Promise. A live person answers the phone, day or night.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












