







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Los Angeles Owner’s Guide
A failed CWS paver or driveway section in Los Angeles can be replaced. Installing a CWS-compatible paver driveway runs about $8,260 to $21,240 installed, sealing is $295 to $825, and full driveway replacement lands between $5,900 and $16,520. We don’t promise same-day on hardscape; scheduling is set when you book your free estimate.
Owners usually discover the problem in one of two ways. Either a paver lifts or rocks underfoot after a wet season, or a section of the base fails and the whole run drops and holds water. In Los Angeles, that often shows up in late winter and early spring when the first heavy rain hits a driveway that has been dry for months. The base is usually the culprit, not the surface you can see.
Which CWS Models This Applies To

CWS driveway and paver systems are built as layered assemblies: a compacted aggregate base, a bedding layer, the paver or slab surface, and edge restraint. Compatibility depends on paver thickness, joint spacing, and the edge restraint profile, not on a single part number. The most common gotcha is thickness variance. A paver that looks identical top-down can be 5/8 inch thinner or thicker than the one on your driveway, and a mismatch puts the joint line off and causes rocking where the two sections meet.
To identify what you have, check three things. Measure the paver width, length, and thickness at a corner where one is chipped or loose. Look at the edge restraint along the outer line. Photograph the joint spacing across a clean run. Bring all three to your estimate, or have our technician take them on the first visit. Our technicians have up to 22 years of experience matching hardscape assemblies, which shortens the guesswork.
On OEM versus aftermarket: CWS-specified pavers give you the exact color and thickness match. A quality aftermarket paver can work if the thickness is verified against the existing bed, and it often saves money on a single-section repair. For a full driveway, matching the restraint profile matters more than the paver brand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
These five symptoms each point to a different underlying failure. Naming the cause matters more than naming the crack.
- Rocking or loose pavers. The bedding layer has lost compaction or the base was under-compacted when installed. Each rocking paver shifts a little more until the joint fills with sand and dirt.
- Standing water after rain. A depression has formed in the base. Los Angeles clay soil holds water, so a low spot that stays wet for more than a day is base failure, not a surface issue.
- Sunken or uneven sections. The subgrade has settled under a load-bearing zone. This is common near the apron and driveway entrance where vehicle weight concentrates.
- Cracked or chipped pavers. Often a sign the underlying layer rocks under weight. A paver that cracks in place and stays put usually means a point load on a thin spot.
- Washed-out joints and edge push. Missing sand and a slipping edge restraint let the field spread outward over time. Left alone, the entire outer line eventually fails.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing on a CWS driveway replacement in Los Angeles depends on square footage, the thickness of the existing base, the kind of soil under it, and the edge restraint. Here are the installed ranges we work from, all given as a written price before any work begins.
| Service | Installed Price Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Driveway replacement (full section) | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
| Paver patio installation | $4,130 – $12,980 |
Each written quote is a line-item price. Base prep, bedding sand, edge restraint, and paver supply are priced separately so you can see where the money goes. All completed work falls under the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge.
DIY or Call Us?
There’s a safe middle ground here. You can safely walk the driveway and mark every rocking paver, photograph the joint lines, and check for low spots with a straightedge. That information makes the estimate faster and the price tighter.
Where DIY goes wrong is the base. Replacing a paver on damaged bedding without fixing the layer below it means the new paver rocks inside a season. On a full section, the base compaction and edge restraint are the parts that hold everything, and those are the parts a homeowner can’t easily verify with hand tools. Driveway hardscape also handles vehicle weight, and a failed edge restraint can push the field outward. Call (844) 343-6681 to schedule a free estimate and we’ll tell you plainly which layer is failing.
FAQs

How long does a CWS paver driveway last in Los Angeles? Ten to twenty years when the base is prepped for Los Angeles clay and the edge restraint is set correctly. Failures under ten years are almost always base failures, not paver failures. Call (844) 343-6681 for a free estimate on the failing section.
Can a failing paver or driveway be repaired instead of replaced? Yes, if the failure is isolated. A single rocking paver or a short sunken run can usually be lifted, re-bedded, and reset. Once the whole field has spread or the base is failing across multiple sections, replacement is the honest answer.
How long does a driveway or paver swap take? A single-section paver replacement is a partial-day job. A full driveway rebuild runs several working days, with the base prep taking the most time. Call (844) 343-6681 for a scheduled window after your estimate.
How do you source the CWS-compatible part? We measure your existing paver dimensions, thickness, and restraint profile on the first visit, then match the right assembly from our documented vendor roster, which includes Belgard and Unilock hardscape lines. We don’t stock parts; each order is specified to your job. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with CWS.
Bradford Remodeling Co Los Angeles is a member of the Garrison Partners family and held to The Garrison Standard: always a written price before any work starts, a live person answering the phone 24/7, and the 365-Day Done Right Promise on every finished job. We also service KraftMaid, Cambria, and Silestone projects. Kitchen and bathroom remodels use the same written-price, background-checked-crew discipline if you’re considering work beyond the driveway.
Call (844) 343-6681 for a free estimate. The price you get is the price you pay, and it’s in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












