







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Culver City, CA
We provide independent CGI construction service across Culver City, connecting homeowners with local pros who know CGI’s cabinet, countertop, shower enclosure, and window lines down to the tolerance. What makes our work here different: in Culver City, a CGI installation has to clear the city’s own building department, not LA County’s, and the housing stock spans 1920s bungalows and Hayden Tract adaptive-reuse buildings that rarely start square. Call (844) 343-6681 for a free estimate.
Why Culver City Residents Choose Us for CGI Service

We’re not CGI dealers and we don’t pretend to be. Bradford Remodeling Co Los Angeles is an independent provider, so our loyalty sits with the homeowner on the Culver City job, not with a manufacturer’s sales target.
That distinction matters when a cabinet box is out of plumb or a quartz seam cracks. An authorized dealer is often pushed to replace; we can make an honest call on whether the right fix is OEM parts, vetted aftermarket hardware, or a rebuild. Our technicians have up to 22 years of experience with CGI’s semi-custom cabinetry, fabricated stone tops, shower glass systems, and window and door assemblies.
We answer the phone with a live person 24/7, put a written price in front of you before any work starts, and back completed work with the 365-Day Done Right Promise. If a CGI install fails inside that year, we return and correct it at no charge. Every job is handled by background-checked, uniformed technicians, so you know who is walking through the door before they arrive.
For the CGI side of the work, see our CGI service page for the product lines and failure modes we handle.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Culver City
Most CGI problems we see in Culver City trace back to the building the product was set into, not the product itself. Here’s what comes up.
- Cabinet boxes and drawer glides set out of plumb by settling foundations. Carlson Park and Sunkist Park bungalows sit on raised 1920s-1940s foundations that shrink and shift. Doors rub, drawers drift, and a CGI semi-custom run that fit perfectly on paper fights its frame after two seasons.
- Quartz and granite seam cracks from slab movement. Narrow-lot kitchens in older Culver City homes often have slabs lifted by mature ficus and palm roots. The stone flexes, and a corner chip or seam split shows up near the sink or island end.
- Shower glass and tile surrounds failing at the wall junction. When shear-wall retrofit work moved framing in an older home, the wall plane changed. A CGI enclosure installed before that correction meets the tile at an angle that eventually leaks or cracks.
- Roofing and window assemblies stressed by Santa Ana winds and ember exposure. Cheap flashing and seals degrade ahead of rated Class A assemblies. Dry wind events push water and embers into gaps a rated system would have closed.
- Window and door systems racked by structural work on Hayden Tract buildings. In converted 1940s tilt-up and industrial spaces, the opening wasn’t cut for a residential CGI assembly, so the frame needs prep before the unit sets true.
CGI Service in Culver City: What Local Conditions Mean for Your Equipment
Culver City permits and inspects through its own building department, not LA County’s. That single fact changes how a CGI cabinet, counter, or shower job runs here compared to the same work a few blocks away in Mar Vista or Santa Monica. The city review is more hands-on, and the inspection sequence is local. A CGI cabinet run or a shower enclosure that involves structural correction has to be planned around Culver City’s permit steps, and the rough-in and framing corrections need to be signed off before the finish goes on. In a 1930s bungalow or a Hayden Tract adaptive-reuse building, CGI cabinets or a shower enclosure often arrive to find walls out of plumb and a raised foundation that has moved. Root intrusion from mature ficus and palms routinely lifts slabs and fouls laterals, so the fix usually starts with shimming and refastening framing, correcting the footing, and resetting the CGI product before tile or trim. A qualified local pro pulls the permit through Culver City and coordinates the structural correction with the cabinet or glass install. Skip that sequencing and the inspection fails, or the install passes and fails later. Either way you pay twice.
CGI Models & Products We Service in Culver City
We work across CGI’s main residential lines: semi-custom cabinetry, countertops supplied through local fabricators, shower enclosures and glass systems, and window and door assemblies.
Parts sourcing runs on a clear rule. Where the CGI product line is still supported, we use OEM replacement parts – glides, hinges, seals, hardware – matched to the model. Where OEM supply has lapsed, we fit vetted aftermarket components and tell you plainly that’s what we’re doing. We don’t stock CGI parts locally, so each repair’s parts list is pulled for your specific model and job, and the written quote reflects it. If a drawer glide can be replaced instead of a full cabinet run, we’ll say so.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Culver City

Here’s what CGI construction work typically runs in Culver City. These are written-price ranges based on the Los Angeles market, and you get a firm number before any tool comes out.
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14000 – $45000 |
| Cabinet Installation | $4000 – $13000 |
| Countertop Installation | $2000 – $6500 |
| Walk-In Shower Installation | $4500 – $12000 |
| Roof Replacement | $8000 – $20000 |
What moves your number: foundation or framing correction before the CGI product sets, whether OEM or aftermarket parts are needed, and the permit sequence through Culver City’s building department. A free estimate includes a walk-through, a written line-item scope, and the parts call on repair versus replacement. Call (844) 343-6681 for your free estimate.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Culver City
You ask, and we tell you straight: we are not manufacturer-authorized and we make no partnership or warranty claim with CGI. We’re an independent provider, which means our recommendation is based on your product and your home, not a dealer’s obligation. Call (844) 343-6681 to talk it through.
OEM where the product line is still supported, and vetted aftermarket glides, hinges, and seals where OEM supply has lapsed. We tell you which it is before we order. Call (844) 343-6681 for a parts call on your model.
A single product install often runs a day or two; a kitchen with foundation or framing correction takes longer because of the Culver City permit and inspection sequence. You get the timeline in writing with your estimate. Call (844) 343-6681 to schedule the walk-through.
CGI semi-custom cabinetry, fabricated countertops, shower enclosures and glass systems, and window and door assemblies. Bring your model number and we’ll confirm fit and parts. Call (844) 343-6681.
Cabinet installation runs $4000 – $13000, countertops $2000 – $6500, a walk-in shower $4500 – $12000, a full kitchen remodel $14000 – $45000, and roof replacement $8000 – $20000. Call (844) 343-6681 for an exact quote – estimates are free.
Service Areas Near Culver City
We serve Culver City and the neighborhoods around it, including Los Angeles, Beverly Hills, West Hollywood, Inglewood, and View Park-Windsor Hills. Each area has its own building stock and its own permit path, and we plan for both. See our Culver City service area page for coverage details.
Book Your CGI Service in Culver City Today
Ready to get your CGI installation or repair squared away? We’ll walk the job, put the price and the guarantee in writing, and tell you honestly whether repair or replacement is the right call. Call (844) 343-6681 to schedule your free estimate in Culver City.
Written by the team at Bradford Remodeling Co Los Angeles.












