A Bradford company - serving Los Angeles, CA
An open living room and dining area after a whole-home remodel
CGI · Los Angeles

CGI Fence Installation in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Fence Installation: The Los Angeles Owner’s Guide

CGI-compatible fence installation in Los Angeles typically runs $4,130 to $10,620 installed, depending on linear footage, fence height, gate count, and whether the old sections, posts, and footings come out first. We install CGI-compatible fencing for homeowners across Los Angeles, and the work is scheduled, not rushed: a written price before the first post hole is dug and a full-year guarantee on the finished fence.

Call (844) 343-6681

Owners rarely call us because a fence looks bad. They call because a section is leaning after a Santa Ana wind event, because a post has gone soft at the grade line, or because a gate has started dragging and won’t latch. In Los Angeles, that pattern shows up fast: sun bakes the panels, spring marine layer keeps the ground damp, and the base of the post is where the trouble starts. We’re an independent contractor and not affiliated with CGI; we install CGI-compatible fence systems and match components to what’s already standing.

Key Takeaways

  • Installed CGI-compatible fence runs $4,130 to $10,620 in Los Angeles, with a written price before work starts.
  • Leaning panels and dragging gates are usually post or footing failures, not panel failures.
  • Spot repair is often the right call when the posts and footings are still sound.
  • Every completed fence carries the 365-Day Done Right Promise: if it fails inside a year, we return and correct it at no charge.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Which CGI Models This Applies To

CGI hardware and fencing components show up across several property types in Los Angeles: single-family lots, hillside properties in Mount Washington and Echo Park, and small commercial parcels along corridors like Pico and Vermont. Before we quote, we identify what’s already in the ground. That means reading the manufacturer’s label on the post cap, rail bracket, or panel tag, measuring post spacing (common residential spacing runs 6 to 8 feet on center), and checking fence height against your property line. A tape measure and a photo of the label settle most compatibility questions before anyone orders a part.

The OEM-versus-aftermarket decision matters here. Original CGI components match the existing system exactly, which keeps the visual line clean and the warranty intact. Quality aftermarket equivalents cost less and hold up fine on a partial repair, but they can sit slightly differently against older panels, and color lots vary. On hillside lots, we also check how the fence steps the grade; a straight-run panel dropped onto a slope is a common mismatch that shows up within a season.

Signs Your CGI Fence Installation Is Failing

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Five symptoms we see most often in Los Angeles, with the cause underneath each:

  • Panels leaning after wind. The post has lost its footing or the concrete collar cracked. Sun-dried soil plus a hard wind event pulls a shallow post loose.
  • Gate dragging or not latching. Hinge sag or a post that has shifted out of plumb. Left alone, the gate frame racks and the latch gap widens.
  • Soft or spongy wood at the base. Moisture trapped at the grade line, common where irrigation or marine-layer damp sits against the post. The rot starts below the surface.
  • Rust streaks or loose fasteners. Coastal air and salt exposure in areas near the water corrode hardware faster than the panels. Loose brackets let the fence move.
  • Wobbly pickets or rails. Fasteners have backed out of weathered material. It reads as cosmetic until a panel lets go.

If two or more of these show up on the same run, the problem is usually structural, not surface. A post that’s moved needs the footing addressed, not just a new panel screwed on top.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed CGI-compatible fence installation in Los Angeles runs $4,130 to $10,620. The range moves with linear footage, fence height, gate count, material choice, and demolition. Removing old posts and footings is the line item that surprises people, because concrete footings don’t come out with a pry bar; they come out with the right tools and time.

Scope Typical installed range
Full CGI-compatible fence installation $4,130 – $10,620
Vinyl fence installation $4,130 – $10,620
Aluminum fence installation $4,720 – $11,800

You get a written, line-item price before any work begins, with parts and labor separated so you can see what the material costs and what the installation costs. There are no numbers that move at the door. Every finished fence is covered by the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. Call (844) 343-6681 for a free estimate.

DIY or Call Us?

A remodeled hall bathroom with patterned floor tile and painted walls

You can safely check a fence yourself. Walk the line, push on each post to feel for movement, photograph any labels or tags for part matching, and note where the ground stays wet. Measuring your run and counting gates is easy and saves time on the estimate.

Where DIY goes wrong is the footing. Setting a post in Los Angeles soil, digging below the frost-free depth, and getting the concrete collar right is the part that decides whether the fence stands for a decade or leans by next spring. A post that’s too shallow or set in loose fill will fail no matter how good the panel is. If a post is moving, that’s the job to hand off. Our technicians have up to 22 years of experience, and every job gets a written price before we start. Call (844) 343-6681 and we’ll tell you straight whether you need a repair or a replacement.

FAQs

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removed

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch