







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Los Angeles Owner’s Guide
We install CertainTeed-compatible driveway and paver assemblies across Los Angeles, and a full paver driveway installation here typically runs $8,260 – $21,240 installed, with a driveway replacement in the $5,900 – $16,520 range. We can usually get a written estimate on your calendar fast, and the crew that shows up is background-checked and uniformed. Most Los Angeles owners first notice trouble the same way: a low spot that holds water after a Santa Ana wind-driven rain, a paver that rocks underfoot near the driveway apron, or a joint that keeps washing out sand onto the sidewalk no matter how many times it’s swept. If your CertainTeed product is failing at a joint, a corner, or across the whole slab, this page gets you to the right scope, the right price, and the right fix.
Which CertainTeed Models This Applies To

CertainTeed’s hardscape line is thinner than its roofing and siding catalogs, so the first job is confirming what you actually have. Their paver and driveway-adjacent products show up under specific series names and finish families, and the identifying mark is usually on the banding of an original pallet, on the carton end-label, or stamped or embossed into the side of a unit. When the packaging is long gone, we measure a single paver’s length, width, and thickness in inches and match it against the current series spec before quoting anything. Get that measurement wrong by a quarter inch and the whole coursing pattern drifts.
On the OEM-versus-aftermarket question: for the visible paver unit, an exact color and dimensional match matters most, because a mismatched dye lot in a Los Angeles driveway is the one thing that never looks right under our hard afternoon sun. For the layers under it – the base aggregate, the bedding sand, the joint sand, the edge restraint – a quality equivalent is often the smarter buy, and the restraint system in particular is where cheap substitutes fail first. We work from documented manufacturer specs on the parts we source, so the specification is traceable. Worth stating plainly: Bradford Remodeling is an independent contractor and is not affiliated with CertainTeed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Driveway & Pavers Is Failing
Paver driveways rarely fail all at once. They telegraph trouble months ahead. Here’s what to look for and what each symptom actually means:
- Pavers that rock or flex underfoot. The bedding sand beneath has migrated or washed out. Once a unit loses full support, its neighbors start to loosen too, and the movement spreads.
- Joint sand washing onto the apron or sidewalk after rain. The joint sand is eroding faster than it’s being replenished, usually because the edge restraint has shifted and the whole field is creeping outward.
- Uneven color, sun-faded patches, or chalky white blooming. Los Angeles UV exposure bleaches surface pigment unevenly, and efflorescence signals moisture trapped in the base rather than drying through the surface.
- Low spots that pond water for more than a day. The base wasn’t compacted to spec or the subgrade has settled. Standing water in a Los Angeles driveway works down into the base and speeds up the next failure.
- Cracked or heaving units at the driveway-to-street transition. The apron takes the heaviest load and the most runoff. Root intrusion or a failed edge course there is the most common reason a field of otherwise sound pavers needs rebuilding.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Los Angeles, parts and labor together, so you can price before you decide:
| Scope | Installed Range (Los Angeles) |
|---|---|
| Paver driveway installation (new) | $8,260 – $21,240 |
| Driveway replacement (full tear-out and rebuild) | $5,900 – $16,520 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
| Concrete driveway installation (comparison) | $5,310 – $14,160 |
What moves the number: square footage, how much base has to be excavated and re-compacted, whether the edge restraint has to be rebuilt, and the paver series and finish you choose. A repair confined to a few square feet under an edge course sits well below the replacement range; a full field rebuild is at the top. Every project gets a written, line-item price before any work starts – no numbers that change at the door. Every completed project also carries the 365-Day Done Right Promise: a full written guarantee, and if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Confirm the paver dimensions and look for the series mark, note which units rock, and photograph where water ponds. That’s useful information and it’ll speed the estimate along. Where DIY goes wrong on this part is the base. A paver driveway that fails isn’t usually a bad paver; it’s an under-compacted base, a missing or shifted edge restraint, or a joint that never got filled to full depth. Hand-setting a few units over fresh sand without rebuilding the base just moves the failure a few weeks down the road, and hauling and compacting base material is physical work that rewards the right equipment. Leave the base and the restraint to us. Call (844) 343-6681 and we’ll scope it honestly – repair if repair is the right call, replacement if it isn’t. Estimates are free.
FAQs

A well-built paver driveway can hold up for decades, but in Los Angeles the realistic service reminder is joint and seal maintenance every two to three years, not the pavers themselves. Our dry summers and UV load age the joint sand and surface finish before the units wear out, and a single unaddressed low spot shortens the life of everything around it. Call (844) 343-6681 for a free assessment of where yours stands.
Often yes. If the failure is confined to an edge course, the transition apron, or a handful of rocking units, a targeted rebuild of that section – base included – restores the field without touching sound pavers. Full replacement makes sense when settling or joint failure runs across the whole driveway, or when a color-matched lot can’t be found for a small patch. We’ll tell you which one you’re facing after we look, at no charge.
A section repair is typically a one- to two-day job. A full paver driveway replacement in Los Angeles usually runs several days to about a week, depending on square footage and how much base has to be excavated and re-compacted. We give you the schedule in writing up front, so you know the window before the crew arrives rather than guessing.
We match the paver series, size, and dye lot to a documented manufacturer spec before ordering, and we won’t mix lots on a visible field without flagging it first. Underlayers like base aggregate, bedding and joint sand, and the edge restraint are spec-matched equivalents where that’s the better buy. No part gets substituted without your sign-off. Call (844) 343-6681 for a free estimate and we’ll walk you through exactly what we’d source and why.
Bradford Remodeling Co Los Angeles is part of the Garrison Partners family and holds every job to The Garrison Standard: written price first, documented materials, and a signed guarantee in your hand at close. Alongside CertainTeed driveways and pavers, we work with documented brands including KraftMaid, Cambria, and Silestone for the interiors homeowners ask us about most. If your CertainTeed driveway or paver field is showing the signs above, call (844) 343-6681 for a free estimate. A live person answers, and you’ll have a written scope and price before any tool comes out.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












