A Bradford company - serving Los Angeles, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Cambria · Los Angeles

Cambria Bathroom Remodeling in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Bathroom Remodeling: The Los Angeles Owner’s Guide

If your Cambria bathroom surface has cracked, chipped, or come loose from its substrate, a Los Angeles bathroom remodel with Cambria quartz typically runs $10,620 – $33,040 for a full project, and a targeted repair or surface swap is often far less if the damage is isolated. Because Cambria is engineered quartz (about 93% quartz by volume bonded with resin), it behaves very differently from the natural stone and laminate many Los Angeles homes were built with, and that difference drives how it fails and how it gets fixed. Calling (844) 343-6681 gets you a written, itemized price before anything moves.

Call (844) 343-6681

Owners usually discover the problem the same way. A hairline seam opens slightly near the sink. A veined surface shows a chip at the front edge where a hair dryer slipped. A vanity top rocks a little when you lean on it. Sometimes it’s louder: a sharp crack radiating from a cutout for the faucet, or a hot curling iron rested for two minutes that leaves a dull, discolored spot. In Los Angeles, where original 1920s bungalows sit next to 1980s condos, we regularly see Cambria tops, surrounds, and shower surfaces installed over uneven framing or a failing substrate, and that’s often what turns a small edge chip into a full replacement call.

Key Takeaways

  • Cambria is engineered quartz, not natural stone, so it’s non-porous but still vulnerable to heat, impact, and flexing substrates.
  • Full Cambria bathroom remodels in Los Angeles run $10,620 – $33,040; isolated repairs and surface swaps cost far less.
  • The substrate underneath matters as much as the slab. A loose top or surround usually points to the framing, not the quartz.
  • Every project gets a written price before work starts and is covered by the 365-Day Done Right Promise.

Which Cambria Products and Bathroom Applications This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Cambria is a brand of quartz surfaces sold by design and color, not by “model numbers” the way a faucet or a toilet is. The name you’ll see on a sample or a label is the color and surface designation – think of color families and finishes rather than a serialized part. That distinction matters because there’s no single “Cambria bathroom remodeling part” to look up; what you’re really matching is the right slab thickness, edge profile, and substrate system to the existing opening in your Los Angeles home.

The two specs that matter most for a bathroom:

  • Thickness: Cambria is commonly fabricated in 2 cm (roughly 3/4 inch) and 3 cm (roughly 1 1/4 inch) thicknesses. Vanity tops usually call for 2 cm with an edge build-up or 3 cm depending on the look and the cabinet it sits on. Shower walls and surrounds are typically thinner and bonded, not free-floating.
  • Finish and color: Designations run across the brand’s color collections, and finishes range from polished to matte and honed-style looks. Matching an existing installed surface exactly means matching both color and finish, because a polished and a matte of the same color read differently under Los Angeles bathroom lighting.

To identify what you have, look for the fabricator’s markings or a label on the underside of a vanity top or on the back of a shower panel. If there’s nothing printed, measure the thickness with a ruler to the nearest 1/8 inch and photograph the color under daylight. An original-installation invoice or a builder’s spec sheet, when you have one, is the most reliable identifier of all.

OEM vs. aftermarket for Cambria: Cambria is fabricated, not molded. There is no third-party “aftermarket Cambria” the way there are aftermarket auto parts. What actually happens is a certified fabricator cuts a new slab of genuine Cambria to your dimensions, or an independent shop sources a comparable quartz. The trade-off is straightforward: genuine Cambria keeps your color, finish, and material warranty consistent with what’s already there; a comparable quartz from a different maker may cost less but will never match an existing Cambria surface perfectly. For a single-bathroom patch, matching matters; for a full surround replacement, it depends on how much you’re changing at once. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Cambria – we install and specify Cambria and other documented quartz brands to manufacturer specifications, and we’ll tell you plainly which route fits your job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Bathroom Surface Is Failing

Cambria quartz is dense and non-porous, so it doesn’t stain or absorb water the way porous stone does. That’s also why its failures look different from what owners expect. Here’s what we see in Los Angeles, and the cause behind each one:

  • A hairline crack at a cutout or a seam. Corners cut for a faucet or a sink create stress points, and a seam that wasn’t bonded properly can open under normal use. Cracks radiating from a cutout usually mean the cut was too close to an edge or the substrate flexed under the slab.
  • A chip at the front edge or corner. Impact from a dropped item or a hard knock is the most common cause, and a chipped edge on a bathroom vanity is both a cosmetic and a sharp hazard. Small chips can sometimes be filled; larger ones can’t be made to disappear.
  • Discolored or dull spots. Heat is quartz’s weak point – a hot styling iron or a pan set down off the stove can leave a burn mark or a permanently dull area. Resin in the quartz scorches before natural stone would, so heat protects nothing here.
  • A top that rocks or sounds hollow when tapped. This is a substrate problem, not a quartz problem. When the cabinet or the plywood deck underneath is uneven, the slab flexes and eventually cracks, and this is common in older Los Angeles bathrooms where cabinets have settled.
  • Loose shower panels or surround pieces. Adhesive that has failed behind a bonded wall panel lets the quartz shift. Water gets behind a loose panel and into the wall cavity, which is a bigger repair than a re-bond.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included in Los Angeles

A remodeled living room with built-in shelves around the fireplace

A full Cambria bathroom remodel in Los Angeles runs $10,620 – $33,040, and the range is set by scope, not guesswork. A full remodel includes demolition and haul-off, substrate and framing correction, new tile or quartz surfaces, fixtures from our documented roster (Kohler and Moen among them), and finish work. The number moves based on the size of the bathroom, whether the shower or tub is being changed, how much damage the demolition uncovers in the wall or floor, and how much of the existing plumbing rough-in has to be reworked.

Smaller jobs have their own numbers, and we’ll always quote the smallest scope that solves your problem:

  • Small bathroom remodel: $5,900 – $14,160
  • Bathroom vanity installation (with a new quartz top): $945 – $3,540
  • Shower replacement: $3,540 – $10,030
  • Tub-to-shower conversion: $4,130 – $11,800
  • Walk-in shower installation: $5,310 – $14,160

Our pricing is a written, itemized number before any work starts, with the material and labor broken out so you can see exactly what the quartz surface, the substrate correction, and the installation each cost. There are no numbers that move at the door. Every completed project is covered by the 365-Day Done Right Promise – a full-year written guarantee. If the quartz or the workmanship fails inside that window, we come back and make it right at no charge. Estimates are free; call (844) 343-6681 for yours.

DIY or Call Us?

Some things an owner can safely check. Measure the thickness of your surface. Photograph the color and any label on the underside. Confirm whether the top rocks and whether the cabinet underneath is level. Note where chips or cracks start. That information helps us quote accurately and helps you decide what you’re dealing with.

What we don’t recommend is the removal and refitting itself. Quartz slabs are heavy – a 3 cm bathroom top is a two-person lift at minimum, and shower panels are awkward and unforgiving. A slab that slips during a solo install can injure a hand or a foot, and a surface cut without masking and the right blade can be permanently chipped or scorched. Adhesive and substrate work done wrong is what causes the cracks we’re called out to fix. If your surface has cracked or come loose, the honest answer is to have it assessed. Call (844) 343-6681 and we’ll tell you whether a repair will hold or a replacement is the real fix.

FAQs

A single-story rear room addition with tall windows and a new patio

How long does a Cambria bathroom surface last? Cambria quartz is a long-lived material – homeowners commonly get well over a decade of service, and often much longer, when it’s installed over a solid substrate and protected from heat and impact. In Los Angeles bathrooms, the limiting factor is rarely the quartz itself; it’s the framing, the adhesive, and whether heat or impact damage goes unaddressed.

Can it be repaired instead of replaced? Small chips and minor edge damage can often be filled and blended, and a loose panel can sometimes be re-bonded if the wall behind it is sound. Cracks that radiate from a cutout, burn marks, and panels that have shifted because the substrate failed usually point to replacement. We’ll inspect and tell you which one you’re looking at – call (844) 343-6681 for a free estimate.

How long does a swap take? A vanity top swap is often a single-day job once the new surface is fabricated and on site. Shower surrounds and full bathroom remodels take longer, and the timeline depends on fabrication lead time, substrate repairs, and whether plumbing is being moved. We’ll put the schedule in writing along with the price.

How do you source the part? Genuine Cambria is cut to your dimensions by a fabricator, not pulled off a shelf – we specify the color, finish, and thickness to match what you have or what you’re replacing, and we work from our documented roster of quartz and stone brands, including Cambria, Silestone, and Caesarstone, plus KraftMaid, Wellborn, Kohler, and Moen fixtures where they’re part of the job. Bradford Remodeling Co Los Angeles is independent and not affiliated with Cambria; we specify and install to manufacturer specs and stand behind the installation with our own written guarantee.

When you’re ready to know exactly what your Los Angeles bathroom will cost, call (844) 343-6681 for a free estimate. A live person answers the phone around the clock, our technicians bring up to 22 years of experience, and you’ll have a written, itemized price and a signed guarantee in your hand before the job is done. That’s The Garrison Standard – squared away, in writing, every time.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled staircase with wood treads and a slim metal railingA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay window

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch