A Bradford company - serving Los Angeles, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Boxabl · Los Angeles

Boxabl Home Additions & ADU in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boxabl Home Additions & ADU: The Los Angeles Owner’s Guide

A Boxabl-compatible home addition or ADU in Los Angeles runs $53,100 – $153,400 for an addition and $106,200 – $259,600 for a full ADU, fully installed with permits pulled and inspections passed. We give you a written price before any work starts, and every job carries the 365-Day Done Right Promise. Bradford Remodeling Co Los Angeles is an independent contractor and is not affiliated with Boxabl.

Call (844) 343-6681

There’s no single “part” that fails on an addition or ADU the way a hinge or a latch fails on a Casita panel. What fails is the connection between the Boxabl unit and the new structure: the foundation interface, the roof tie-in, the utility rough-in where modular meets site-built, and the weatherseal at the junction. Los Angeles owners usually find out the hard way, during a Santa Ana wind event or the first real rain after a dry stretch, when water shows up at the seam or the slab starts to telegraph a crack into the doorway. That’s the point where the project stops being a plan and starts being a repair.

Which Boxabl Models This Applies To

A wide opening with a new beam where the kitchen wall was removed

Boxabl’s Casita is the unit most Los Angeles owners are adding onto, and it ships as a folding steel-and-concrete-panel module rather than a stud-framed box. The compatibility question isn’t “which part number” – it’s which junction detail. Newer Casita units use a specific wall-panel depth and corner-chase layout that older aftermarket addition kits simply weren’t drawn for. If a supplier hands you a tie-in bracket sized for a conventional 2×4 wall, it won’t seat correctly against the Casita’s panel edge.

How to identify what you’re working with: check the data plate inside the unit for the model and build date, then measure the wall panel thickness at the connection point and the pitch of the roof at the tie-in. Those two numbers, not a catalog listing, tell you which bracket and flashing profile you actually need.

On the OEM-versus-aftermarket call, the honest answer is split. For the structural tie-in plates and the roof flashing profile, use the factory-spec part – the tolerances are too tight to substitute. For the utility rough-in fittings (water, drain, conduit), quality aftermarket components that meet the same spec work fine and cost less. We specify the traceable brands for the site-built portion of your addition: KraftMaid and Wellborn cabinetry, Cambria and Caesarstone surfaces, Silestone where the budget calls for it. Our technicians have up to 22 years of experience on modular-to-site-built junctions, and we don’t guess at what fits.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boxabl Home Additions & ADU Is Failing

These are the five symptoms Los Angeles owners call us about, and the cause underneath each one:

  • Water at the seam where the roof meets the addition. The flashing profile has lifted or was never mated to the Casita’s roof pitch. This shows up first after a hard rain, not during one.
  • A hairline crack stepping out from the doorway or corner. The foundation interface has settled unevenly, usually because the site-built slab and the module pad weren’t tied to a common base. Los Angeles clay soils move with the wet-dry cycle and will find any gap.
  • Doors that stick or swing on their own. That’s the same frame movement showing up at the rough opening. Not a hinge problem – a substrate problem.
  • Drafts or moisture at the wall panel joint. The weatherseal at the junction has failed. UV exposure and inland heat bake gaskets out faster than most owners expect.
  • Condensation or corrosion at the utility rough-in. The water or drain connection wasn’t insulated or flashed where it penetrates the module wall. Left alone, it corrodes the fitting from the outside in.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A framer checking new wall framing on a home addition

Here’s the price range for a Boxabl-compatible addition or ADU project in Los Angeles, installed:

Scope Installed Price Range (Los Angeles)
Home Addition (Boxabl-compatible) $53,100 – $153,400
ADU Construction $106,200 – $259,600
Garage Conversion $35,400 – $94,400

What moves the range: the foundation and site work (Los Angeles grading and clay-soil prep is the big variable), the roof tie-in complexity, how far the utility runs have to travel, and the finish level on the site-built portion. The structural tie-in and flashing are specified parts, not allowances – we price them explicitly so you know what you’re paying for. You get a written line-item price before any work starts, with no change-order surprises at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails within the guarantee period, we return and correct it at no charge.

DIY or Call Us?

An owner can safely check a few things: measure the wall panel thickness and roof pitch at the tie-in, look for daylight at the flashing, and note where the cracks or moisture show up. What you shouldn’t do yourself is the structural tie-in, the roof flashing, or anything that involves the utility rough-in. Those are the parts that fail quietly and cause five-figure damage later. Cutting into a Boxabl roof junction without the right profile means water gets in behind the panel, and you won’t know until the ceiling stains.

If you’re seeing the symptoms above, the safe move is a site assessment, not a YouTube fix. Call (844) 343-6681 for a free estimate. A live person answers, 24/7.

FAQs

A project lead and homeowner reviewing plans in a room under renovation

How long does a Boxabl-compatible addition or ADU last in Los Angeles? A properly tied-in addition should hold its seal and settle evenly for decades, but the weatherseal and flashing at the junction are the parts that wear – inspect them after the first rain each season. If the seal or the tie-in fails within your 365-Day Done Right window, we correct it at no charge. Call (844) 343-6681 for an exact quote on your project – estimates are free.

Can the failing connection be repaired instead of rebuilt? Often yes – a lifted flashing profile or a failed gasket can be replaced without touching the structure. If the slab interface has settled, that’s a bigger repair. We tell you which one you’ve got after we’ve looked at it, in writing. Call (844) 343-6681 to schedule the assessment.

How long does the swap take? A flashing or weatherseal repair is typically a day or two. A foundation tie-in correction or a full addition build takes weeks, not days, because permits and inspections run on Los Angeles timelines. You’ll get a written timeline with your written price. Call (844) 343-6681 for a free estimate.

How do you source the part? Factory-spec parts for the structural tie-in and flashing come from the factory channel; the site-built portion is specified from our documented brand roster – KraftMaid, Wellborn, Cambria, Caesarstone, Silestone, and the rest. We don’t claim to stock parts, and nothing rides on a truck. Every part is sourced for your specific unit, spec’d against the data plate and your measurements. Call (844) 343-6681 and we’ll walk through exactly what your unit needs.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
An open living space after a whole-home remodelA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled family room with new windows and a window seatA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch