A Bradford company - serving Los Angeles, CA
An open living room and dining area after a whole-home remodel
Boral · Los Angeles

Boral Windows & Doors in Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Los Angeles
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Windows & Doors: The Los Angeles Owner’s Guide

We install Boral-compatible windows and doors across Los Angeles, and full window replacement typically runs $5,310 to $17,700 installed, with impact-rated units at $9,440 to $29,500. Boral window and door failures show up fast: a sash that drags on the jamb when the afternoon sun hits it, condensation trapped between panes, or a door that won’t latch clean in winter but swells shut by August. In Los Angeles, owners usually find the problem in one of two ways. Either they notice the symptom on a hot day and assume the frame warped. Or a technician pulls the trim during a separate repair and finds the hardware, weatherstrip, or glass seal has been failing quietly for months.

Call (844) 343-6681

Which Boral Models This Applies To

A whole-home remodel with the living, dining and kitchen areas opened up

Boral builds windows and doors in several lines, and the part you need depends entirely on which line you have. Before calling anyone, find the manufacturer label. It’s usually a small sticker on the inside of the jamb, on the sash edge, or on the door slab’s top hinge side. That label carries the series name, the unit dimensions, and a manufacturing code. Write those down. A part matched to a Boral vinyl single-hung won’t fit a Boral aluminum-clad casement, and the sash balances, weatherstrip profiles, and lock hardware are different parts entirely. Measure the rough opening as a backup, but the label is the reliable identifier.

On the OEM-versus-aftermarket question: for Boral specifically, sash balances, tilt latches, and lock hardware have solid quality aftermarket equivalents that fit and function correctly. Glass units and full sash assemblies are a different matter. For those, match the original spec or the warranty picture gets murky. Our technicians have up to 22 years of experience reading Boral labels and cross-referencing part numbers, and we don’t guess on a match. We confirm it before we order. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Boral.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Windows & Doors Is Failing

Five symptoms we see constantly in Los Angeles homes, and what’s usually behind each one:

  • The sash won’t stay up. A failed balance spring or a broken balance shoe is the cause. On a Boral single-hung, the balance is a wear part with a finite life, and once it’s sprung the sash drops without warning.
  • Condensation or fog between the panes. That’s a seal failure in the insulated glass unit. The glass hasn’t cracked, but the seal that keeps moisture out has, and no amount of wiping fixes it.
  • The lock won’t catch or the door catches on the strike. The lock mechanism, keeper, or strike plate is out of alignment or worn. On Boral patio doors, a lock that half-catches is a sign the mechanism is worn out, not just misaligned.
  • Daylight or a draft around the frame. Weatherstrip that’s compressed flat or pulled loose from its channel. In Los Angeles, the sun and dry air break down foam and bulb seals faster than most manufacturers plan for.
  • A hinge that sags or a door slab that drags. Worn hinges or a shift in the frame from settling. Left alone, the dragging slab eventually cracks the hinge stile.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A freestanding soaking tub in a remodeled primary bathroom

Here’s where Los Angeles pricing lands for Boral-compatible window and door work, installed, with the part and labor in one written number:

Work Installed Price Range
Window replacement (standard) $5,310 – $17,700
Impact window installation $9,440 – $29,500

The range moves with unit size, frame material, glass package, and whether we’re replacing a single unit or a full wall of them. A standard window swap sits at the low end; impact-rated glass and oversized openings push toward the top. Door hardware, sash balances, and weatherstrip replacement are quoted as smaller line items inside these jobs. Every price is written before any work starts, and every completed install carries our 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.

DIY or Call Us?

You can safely do three things: find and photograph the manufacturer label, measure the rough opening, and check whether the sash or door moves freely when you lift it gently. Anything past that is where it goes wrong for homeowners in Los Angeles. Replacing a sash balance on a double-hung window means handling a spring under load, and a released spring can cause injury. Swapping an insulated glass unit means removing the sash, resetting the glazing, and resealing against moisture correctly, which most owners can’t do cleanly without the right tools. And a lock mechanism installed out of alignment worsens the frame stress over time. Sourcing the correct part number first is the whole job. Call (844) 343-6681 for a free estimate, and we’ll match the part, quote it in writing, and confirm it fits your specific Boral unit before we touch anything.

FAQs

A second-story addition that matches the existing roofline

How long do Boral windows and doors last in Los Angeles? Boral windows typically last 20 to 30 years, but the wear parts inside them don’t: sash balances, weatherstrip, and lock mechanisms commonly need replacement in 10 to 15 years. In Los Angeles, dry heat and sustained sun exposure break down foam weatherstrip faster than the frame itself degrades, so weatherstrip is often the first item to go.

Can the part be repaired instead of replaced? Sometimes. A worn lock or a loose strike plate can often be adjusted or rebuilt. A failed sash balance or a fogged glass unit cannot be repaired, only replaced. On glass: once the seal fails and moisture gets between the panes, the unit has to come out. Call us for an exact quote, and estimates are free.

How long does the swap take? A single sash balance or lock mechanism is usually a same-visit job once the correct part is sourced. A full window or door unit replacement typically runs a few hours per opening. We confirm the timeline on the written estimate before any work begins.

How do you source the right Boral part? We start with the label code and measurements from your unit, cross-reference the part against the Boral series, and confirm fit before ordering. We don’t carry parts in stock and don’t guess at matches. The part is confirmed against your spec, not approximated. For questions on windows and doors, or on the KraftMaid, Cambria, and Silestone work we also do, call (844) 343-6681 for a free estimate.

Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Los Angeles team

A local vetted partner works across Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 343-6681
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Bradford Remodeling Co Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch