







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Los Angeles Owner’s Guide
If you’re working a Boral material into a kitchen remodel in Los Angeles, our installed kitchen remodeling ranges run $16,520 to $53,100, and we schedule the site visit around your timeline rather than promising a same-day install that nobody can honestly deliver. Boral covers two very different product families – its stone and brick veneer line, historically the Cultured Stone name, and its Boral TruExterior trim and siding line – so which one you’re holding changes the whole scope and price. Most Los Angeles owners find the problem the same way: a veneer face pops loose above the range, a grout joint at a backsplash corner opens up, or a piece of Boral trim at a window or soffit swells and peels near the coast. You notice it while wiping down a counter, and then you can’t un-notice it.
Key takeaways
- Boral makes two unrelated product families used in kitchens: manufactured stone veneer and TruExterior poly-ash trim. Identify yours first.
- Installed kitchen remodel range in Los Angeles: $16,520 – $53,100. A small kitchen runs $10,620 – $23,600.
- Every Bradford price is written before work starts, and every completed job carries the 365-Day Done Right Promise.
- We are an independent service provider and are not affiliated with Boral.
Which Boral Products This Applies To

“Boral” isn’t one product, and treating it as one is where most price confusion starts. The company’s manufactured stone veneer – sold for years under the Cultured Stone brand and still shipped in Boral cartons – is a cast concrete product used for kitchen feature walls, range hood surrounds, and fireplace faces. The Boral TruExterior line is a different animal: a poly-ash exterior trim and siding material with very low moisture movement, commonly used at window casings, exterior soffits, and door surrounds. Neither is a cabinet, counter, or fixture, so if you’re pricing cabinetry or surfaces, that’s KraftMaid or Wellborn for boxes and doors, and Cambria or Silestone for counters.
Here’s the compatibility gotcha that costs homeowners money. Boral veneer is specified and sold by square footage of face area, not by the piece, and it ships in cartons that cover a set face area – corners are counted separately as linear feet and are not included in the flat carton. Order flat only and you’ll come up short on every outside corner of a range hood surround. The second gotcha: TruExterior is sold in specific nominal widths and thicknesses, and a 4/4 trim profile from one supplier doesn’t match a 5/4 from another at the same joint. Measure the actual piece, not the label on the outside of the box, before you order anything. Our installers photograph the existing profiles and match them against manufacturer spec sheets rather than eyeballing it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Product Is Failing
Five things we see constantly in Los Angeles kitchens, and what’s actually behind each one.
- Veneer face separating from the substrate. Usually a bond failure, not a product defect – the scratch coat or bonding layer wasn’t right for the sheathing behind it. In a kitchen, steam and grease from the range accelerate it.
- Efflorescence, that white chalky bloom, on the stone. Moisture is migrating through the wall and drying out through the face. Chasing it with a sealer hides the symptom and traps the water.
- Hairline cracks tracking through cast stone pieces. Often a control joint problem. Veneer over a large wall needs movement accommodation, and a kitchen wall that shares framing with a stucco exterior moves more than people expect.
- Boral trim swelling, delaminating, or peeling at exterior jambs and soffits. On the TruExterior side this is usually a coating failure or an end-joint left unpainted. Poly-ash handles moisture far better than wood, but cut ends still need protection.
- Grout or sealant joints opening at backsplash corners. Thermal movement between the veneer plane and the drywall. It shows up first at inside corners and above the range where heat swings hardest.
Replacement Cost & What’s Included

For a kitchen remodel in Los Angeles that includes correcting or replacing Boral veneer or trim work, the installed range is $16,520 to $53,100. A smaller kitchen lands at $10,620 to $23,600. When the work is scoped to a single element, cabinet installation runs $4,720 to $15,340, countertop installation $2,360 to $7,670, and a backsplash installation $945 to $2,950 – and that backsplash line is where a lot of veneer and trim corrections actually live.
What moves the number up: how much existing veneer or trim has to come off before the new work goes on, whether the substrate behind it is sound or needs repair, and whether corners or specialty pieces are involved. What’s always in the price: materials and labor quoted as a written line-item list before a single tool comes out, permits pulled where the work requires them, and site cleanup at close. Every completed project carries the 365-Day Done Right Promise – if the work fails inside that year, we come back and correct it at no charge. Our technicians have up to 22 years of experience.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely handle the diagnostics. Measure the actual face area wall by wall and write it down. Count the outside corners in linear feet. Check whether the failing piece is loose at the bond line or cracked through the body of the material – those are different repairs. Photograph the profile of any Boral trim against a tape measure.
Where it goes wrong is installation. Manufactured stone veneer is a system: lath, scratch coat, bonding layer, and proper flashing at every transition. Skip any one and the face releases, sometimes within a season. On the trim side, painting or sealing a cut end after it’s already installed is guesswork. There’s no high-tension spring or live wiring in this work, but there is a real risk of water intrusion into a wall cavity, and that’s expensive to unwind. If the failure is within reach of a ladder and the piece is loose, leave it alone until someone looks at it. Call (844) 343-6681 and we’ll scope it properly.
FAQs

Manufactured stone veneer installed correctly should hold 30 years or more, and Boral TruExterior trim carries a long manufacturer warranty because poly-ash barely moves with moisture. The realistic caveat is Los Angeles-specific: inland kitchens in the San Fernando Valley see much bigger daily temperature swings than coastal kitchens in Santa Monica, and that movement is what opens sealant joints and stresses bond lines over time. The material isn’t usually the failure – the installation and the flashing are.
Sometimes, yes. A single loose veneer piece can often be re-bonded if the substrate behind it is intact, and an opening sealant joint at a backsplash corner is a re-caulk, not a rebuild. Cracks running through the body of the stone, or efflorescence that keeps returning after cleaning, mean moisture is getting in somewhere and the repair is at the wall, not the surface. We’ll tell you which one you have before quoting anything. Call (844) 343-6681 for a free estimate.
A backsplash-scale correction is usually a few days of on-site work. A full kitchen remodel that includes veneer and trim replacement runs weeks, not days, and the schedule depends mostly on how much tear-out the existing substrate needs. We put the sequence in writing before work starts so nobody is guessing about the timeline. Estimates are free.
Through manufacturers and suppliers with traceable specs, matched to the exact product family and profile on your wall – we don’t stock parts and we don’t carry material on a truck. That’s deliberate: it means the piece that shows up is the piece specified, with a manufacturer warranty behind it rather than a guess from a bin. We work with a documented roster of name-brand materials across the trade, including KraftMaid, Cambria, Silestone, and Boral among others.
Get a Written Price Before Anything Starts
Bradford Remodeling Co Los Angeles is part of the Garrison Partners family and operates as an independently owned and operated business held to The Garrison Standard. That means a written, line-item price before work begins, background-checked and uniformed technicians on every job, and a live person answering the phone around the clock – not a queue, not a callback. When we close a job you get a clean site, a documented scope, and the signed 365-Day Done Right Promise in your hand. Call (844) 343-6681 for a free estimate on your Los Angeles kitchen project.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












