







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Los Angeles Owner’s Guide
Boral fence installation in Los Angeles typically runs $4,130 – $10,620 installed for a standard residential run, with the range driven by linear footage, gate count, and site access. We install composite fence systems that match Boral-spec hardware and post spacing, and we quote the number in writing before any digging starts. Most Los Angeles homeowners find out something is wrong the same way: a post leans after the first wet winter, a picket face fades unevenly while the rest of the fence holds color, or a gate that lined up in summer drags on the latch by fall. By the time a panel racks out of square, the failure usually started at the post or the rail fastener, not the picket itself.
Which Boral Models This Applies To

Boral’s composite fencing line has run under a few product names over the years, and the differences that matter to installation are the rail profile, the post cap style, and the picket thickness. The homeowner-facing label is often gone. What survives is the stamp on the back of a picket or the underside of a rail, plus whatever the original installer left behind. Before we quote, we measure picket width to the sixteenth, check rail depth, and count the fasteners per bay. If the profile is discontinued, we match by dimension rather than by name.
On the OEM-versus-aftermarket question, our position for Boral specifically is straightforward. Post caps, top rails, and gate hardware have close aftermarket equivalents that fit cleanly and hold up. Picket faces do not. Composite color and embossed grain vary batch to batch, so a patched panel of non-matching stock reads as a repair from the sidewalk, and UV fade over a few Los Angeles summers can pull two batches further apart. Where the original profile is still available, we specify it. Where it is not, we tell you that plainly and quote a full-run replacement rather than a patch that will look worse in two years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Fence Installation Is Failing
- Posts leaning after rain. In Los Angeles clay and the older fill soils common across the San Fernando Valley, a post set in a shallow concrete footing heaves and rotates with the wet-dry cycle. The fence did not fail; the footing did.
- Even fade that stops at one panel. Composite pickets fade as a set. When one bay goes chalky or gray while its neighbors hold color, that bay came from a different batch or was replaced before you owned the property.
- Rails pulling away from posts. Stainless fasteners in direct sun loosen as the composite expands and contracts through a Los Angeles summer. Once two rails per bay back out, the panel racks and the pickets start to twist.
- Gate sag and latch drag. A gate that clears in June and scrapes in November is a hinge and post-anchor problem, not a gate problem. The post is moving more than the gate is.
- White bloom or surface crazing. Chalking on a composite face is normal in year one and should stabilize. Crazing, fine cracks in the surface skin, means the picket was exposed to sun before or during install and is not recovering.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Los Angeles on this page runs $4,130 – $10,620 installed. Linear footage moves the number most, then gate count, then access – a hillside run in the Hollywood Hills where material comes up a stair path costs more than a straight run in a Porter Ranch side yard. Post footings in clay cost more than in sandy soil because they need deeper, wider pours. We break the quote into demolition, footing, posts, rails, pickets, gate hardware, and haul-away, so you can see where the money goes. Every completed fence carries the 365-Day Done Right Promise: if a post we set moves or a rail we hung fails within a year, we come back and correct it at no charge.
DIY or Call Us?
You can safely walk the fence and check things that need no tools. Push each post at shoulder height and note any movement. Look down the line for lean. Open and close every gate. Check for rust streaks at each fastener head. Those checks tell you where the failure is.
Where DIY goes wrong is the footing. A post set in a bag of quick-set in an undersized hole looks fine for one season in Los Angeles and then moves. We’ve pulled enough of those to know the pattern. A composite fence also needs consistent fastener torque and expansion gaps at every rail, and a homeowner working from a video usually misses one or both. If the fence is more than two bays of trouble, call (844) 343-6681. We’ll look, tell you what failed, and price it in writing before we touch anything.
FAQs

A properly installed Boral composite fence should hold its structure for 20 to 30 years in Southern California’s climate, though color and surface finish will change well before that. The realistic failure point is the footing, not the composite: in clay soil with our wet-winter, dry-summer swing, an undersized post footing can start moving in three to five years. The picket material itself is rarely the first thing to go.
Often yes, if the failure is localized to footings, fasteners, or gate hardware, and we’ll tell you when repair is the right call rather than a full replacement. Repair stops being the right answer when the picket profile is discontinued or when more than a few bays are fading unevenly, because the patch will not match. Call (844) 343-6681 for an exact quote. Estimates are free.
A typical residential run of 100 to 150 linear feet takes two to four working days, including demolition, footing cure, and haul-away. Gate fabrication adds time, and hillside access adds more because material has to be moved by hand. We schedule the work and give you the written price up front, so the timeline you hear is the timeline you get. Call (844) 343-6681 to set up your free estimate.
We source by dimension and profile from documented composite suppliers, not by the name on the old label, because labels are usually gone by the time a fence needs work. We measure picket width, rail depth, and post dimensions on site, then specify what fits. Bradford Remodeling is an independent service provider and is not affiliated with Boral. We work from a documented roster of name-brand materials, the same discipline we apply to KraftMaid, Cambria, and Silestone projects. Call (844) 343-6681 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












