







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Los Angeles Owner’s Guide
We install Boral-compatible driveway and paver systems across Los Angeles, and a full paver driveway installation in this market runs $8,260 to $21,240 installed, depending on square footage, base prep, and pattern. Most planned paver replacements take one to three working days once materials are on site. We’re an independent service provider and not affiliated with Boral – we work with their products (and Belgard and Unilock) as a documented materials roster.
Owners usually discover a failed paver system from the ground up, not the top down. It starts with a paver that rocks underfoot or a joint that keeps washing out after every rain, and then a hairline crack spreads across the surface. By the time you can see the crack, the base underneath has usually already moved. That’s the part that matters, because in Los Angeles the paving’s real enemy is soil movement and water, not the concrete face of the paver itself.
Which Boral Models This Applies To

Boral’s paver line spans several families, and the ones we see most on Los Angeles driveways are the Boral Aspen and Boral Brighton interlocking pavers, plus the Boral Stonewall line used for garden and retaining walls. Each family comes in a fixed set of nominal sizes – common face dimensions run roughly 4-by-8 inches up to 24-by-24 inches on larger format pavers – and thickness matters more than face size for a driveway. Driveway pavers are typically 2 3/8 inches to 2 3/4 inches thick; a 1 1/2-inch or 60mm paver is fine for a patio but will crush and shift under a car.
How to identify what you actually have
Pull one paver from an edge course and measure its thickness and face dimensions with a tape. Check the underside for a manufacturer stamp or mold mark. Look at the color and surface finish – Boral’s textured and smooth finishes come in fixed color families, and matching an open paver still in the yard to a discontinued color is the single most common sourcing headache we run into. If your paver was part of an older colorway that’s no longer produced, the honest options are to harvest spares from a hidden area (under a planter or behind a fence) or to re-lay a visible band in a current color.
OEM vs. aftermarket for Boral
For a repair of a few pavers, a quality aftermarket equivalent that matches thickness and compressive strength is usually fine – nobody sees the underside. But for anything that touches the base or a load-bearing edge, we specify genuine Boral same-family product, because mixed thickness and mixed compressive rating under a driveway is what causes differential settling. Boral’s paver lines carry a published compressive strength spec and a dimensional tolerance band; off-brand pavers often don’t publish either, and that’s the gap that bites you two winters later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
- Rocking or loose pavers over a small area. Typically the bedding sand has washed out or the base course was never compacted to depth. A single rocking paver near a downspout usually means water is channeling under the system.
- Joint sand that keeps disappearing. Polymeric sand erodes when water moves through the joints instead of off the surface. Persistent loss means the slope or drainage is wrong, not that the sand is bad.
- Hairline cracks across a field of pavers. Surface cracks on individual units point to point-loading – usually a hollow spot in the base or a paver laid too thin for vehicle traffic.
- Sunken low spots or heaving near a tree. Los Angeles’ expansive clay soils swell and shrink with our wet-dry swings, and tree roots lift pavers from below. Heaving is almost always a base and root problem, not a paver problem.
- Efflorescence – white powdery bloom on the surface. A mineral migration that shows up when moisture is trapped under the pavers. It looks cosmetic but usually signals a sealing or drainage issue that keeps the base damp.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what paver work runs in Los Angeles, installed – materials, base prep, compaction, laying, joint sand, and cleanup included in the number:
| Scope | Installed Price Range (Los Angeles) |
|---|---|
| Paver driveway installation (full) | $8,260 – $21,240 |
| Driveway replacement (remove old, re-base, re-lay) | $5,900 – $16,520 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
| Concrete driveway installation (comparison) | $5,310 – $14,160 |
What moves the number: total square footage, how much base has to come out and be re-compacted, whether drainage has to be corrected, the paver family and thickness, and whether a perimeter edge restraint has to be rebuilt. We quote parts and labor as separate lines so you can see exactly where the money goes, and we give you that written price before any work starts. Every completed job carries the 365-Day Done Right Promise – if the driveway fails within a full year, we come back and correct it at no charge.
Repair instead of full replacement
If the failure is isolated – a handful of pavers, one washed-out joint zone, a single settling spot – we can often lift, re-base, and re-lay the affected area rather than replace the whole driveway. That’s a smaller number and we’ll tell you plainly when it’s the right call versus when re-laying over a failed base will simply fail again.
DIY or Call Us?
You can safely check a lot of this yourself: measure thickness, pull a loose paver to inspect the base, look for efflorescence, watch where water pools after rain. That tells you whether you have a paver problem or a base problem, and the answer changes the whole quote.
Where DIY goes wrong on pavers is the base. Re-laying pavers over an uncompacted or waterlogged base – the exact mistake that caused the failure – just resets the clock, and a driveway carries real injury risk if you’re lifting heavy units and setting edge restraints over a slope. We’d rather you know the honest answer than have you pay twice. If you want a straight range and a written scope, call (844) 343-6681 and we’ll give you a free estimate.
FAQs

A properly installed Boral paver system typically lasts 25 to 50 years on a residential driveway, but how you get there in Los Angeles weather matters. The pavers themselves are durable; the base and joint sand are what fail first, and our dry summers followed by concentrated winter rain are hard on a base that wasn’t compacted to depth and drained correctly. Seal every few years and fix drainage early and you extend the life considerably. Call (844) 343-6681 for a free on-site look – estimates are free.
Yes, in most cases – a localized failure can be lifted and re-laid without touching the rest of the driveway. Isolated cracks, a few rocking pavers, or one settling spot near a downspout are all repairable, and we’ll tell you honestly when a repair is the right call. If the base underneath is uniformly failed, though, spot repairs just postpone the real work. Call (844) 343-6681 and we’ll give you a written price for both options.
A typical residential paver driveway replacement in Los Angeles takes one to three working days once materials are on site, with larger driveways or heavy base re-work stretching it slightly. The base prep and compaction are the slow, important part, and we don’t rush them. We give you the written schedule with the written price before a tool comes out.
We match your existing paver family, thickness, and color against Boral’s current catalog and source genuine same-family product for anything structural. We don’t stock parts or carry pavers on a truck – your material is ordered to spec for your job. Boral is one name on our documented materials roster alongside Belgard, Unilock, and others, and we specify KraftMaid, Cambria, and Silestone on the interiors side, so specifications stay traceable. Call (844) 343-6681 to schedule a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












