







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The Los Angeles Owner’s Guide
Boral bathroom remodeling in Los Angeles typically runs $10,620 to $33,040 for a full bath, and $5,900 to $14,160 for a small bathroom, installed with a written price before work starts. We’re an independent contractor, not affiliated with Boral, and we work to Boral’s published specs so your remodel matches what’s already on the wall. Most Los Angeles owners find the problem the same way: a hairline crack spreading across the shower wall tile, grout that keeps re-cracking no matter how many times it’s patched, or a slow leak that shows up as a soft spot or a stain on the ceiling below. Boral’s bath products hold up well in our dry climate, but twenty-plus years of thermal cycling and the occasional slab shift take a toll. Our technicians have up to 22 years of experience reading those symptoms before a wall comes open.
Key Takeaways
- Full Boral bathroom remodeling in Los Angeles: $10,620 – $33,040. Small baths: $5,900 – $14,160.
- Every price is written before work begins – no numbers that move once the crew is on site.
- Covered by the 365-Day Done Right Promise: if the work fails within a year, we come back and fix it at no charge.
- Boral is a material spec, not a service – we match to it, we don’t sell the parts.
Which Boral Models This Applies To

Boral doesn’t make one shower system – it makes a family of tile and stone products, and knowing which one you have changes how the replacement is specified. The most common in Los Angeles bathrooms are the through-body porcelain tiles, the glazed ceramic wall tiles, and the natural-stone and manufactured-stone surfaces Boral distributes for wet areas. Each has a different substrate requirement, a different grout spec, and a different expected lifespan.
Here’s the part owners get wrong: the label on the box isn’t on the wall. If your tile came from a Boral line, the identifying marks are usually on the back of a loose tile or the original carton – the series name, the nominal size (often quoted in inches, but with a tolerance of a few millimeters), and the shade or dye lot. Take a photo of the back of one tile and measure the actual face, not the carton. If the carton is gone, measure a full course plus the grout joints to back out the nominal size.
On the OEM-versus-aftermarket question for Boral specifically: you cannot buy replacement tile from Boral for a discontinued dye lot, so a perfect match is often impossible. What you can do is match the spec – the correct water absorption rate, the right grout, and a compatible substrate. That’s where we start. We don’t stock Boral parts and we don’t carry them on a truck; we source to your spec. If you’re weighing other premium brands for the same room, we also install KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
The failure almost never shows up where it started. Here’s what actually points to a Boral bath product at the end of its service life:
- Grout that re-cracks within months of being patched. The grout isn’t the problem – movement behind the tile is. Usually it’s a substrate that’s deflecting under foot traffic or thermal expansion the grout can’t absorb. Patching over it just hides the movement until it wins.
- Hollow-sounding tiles when you tap them. A dull thud instead of a sharp click means the tile has debonded from the thinset. On a Boral porcelain tile, that’s often a sign the original install skipped back-buttering, and the void behind it is where water collects.
- A soft or spongy floor near the shower or tub. Water has gotten past the tile and into the subfloor. In Los Angeles, this is more common on older slab-on-grade baths where the deck mud was thin to begin with; a slow leak that never shows on the surface can rot a wood subfloor in a few years.
- Efflorescence – a white, chalky crust on the grout. That’s mineral salt pushed out by moisture moving through the tile assembly. It means the waterproofing layer is compromised, and no amount of cleaning will stop it coming back.
- Cracked tiles along a single line, repeating. A crack that walks across several tiles in a straight line tracks a structural crack in the substrate or a slab. Replacing the tiles alone won’t fix it; the source has to be addressed first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Los Angeles, a full bathroom remodel is typically $10,620 to $33,040. A small bath runs $5,900 to $14,160. The line items that move the number most:
- Removal and disposal of the failed tile and substrate
- New waterproofing and backer board to spec
- Tile and grout material, matched to your Boral spec
- Shower or tub surround rebuild
- Trim, caulk, and finish work
What drives the range: square footage, whether the shower pan has to come out, whether there’s hidden water damage in the subfloor, and the tile you choose. The price you get is written before any work starts – line items, materials, and labor, all on paper. It doesn’t move once the crew is on site. And every completed bathroom we do comes with the 365-Day Done Right Promise: if the work fails within a year, we return and correct it at no charge. No fine print on what “fails” means – it’s spelled out in writing.
DIY or Call Us?
Here’s the honest split. You can safely pull a loose tile and photograph the back to identify the series. You can test for hollow tiles with a tap. You can check for moisture with a cheap pin meter at the grout lines. None of that requires opening a wall, and none of it is dangerous.
What goes wrong with DIY on a Boral bath product is almost never the tile. It’s the substrate. Tearing out a shower without knowing where the waterproofing ends, or resetting tile over a deflecting deck mud bed, guarantees a repeat failure – and you’ll be out the material cost twice. If there’s any chance the subfloor is wet or the pan has failed, stop and have it looked at. Water damage inside a wall is not something to guess at. Call (844) 343-6681 and we’ll tell you what we’d do, free estimate, no pressure.
FAQs

How long does Boral bathroom tile last in Los Angeles? Boral porcelain tile itself can last 30 to 50 years or more, but the assembly around it – grout, thinset, and waterproofing – typically needs attention in 15 to 25 years. In Los Angeles, our dry air and seasonal temperature swings cause more grout cracking than moisture damage; a correctly installed assembly outlasts a rushed one by a wide margin. Call (844) 343-6681 for an exact quote on your bath – estimates are free.
Can a failed Boral shower be repaired instead of replaced? Sometimes – a localized regrout and re-seal can buy time if the tile is sound and the waterproofing is intact. If tiles are hollow or efflorescence is present, waterproofing is gone and a rebuild is the only fix that holds. We’ll tell you which one you’re looking at after we see it. Call (844) 343-6681 to schedule the look.
How long does a Boral bathroom remodel take? A small bath is typically 1 to 2 weeks, and a full bath runs 2 to 4 weeks depending on scope and whether hidden water damage turns up. The timeline is written into your price before work starts, so you know what you’re in for. Call (844) 343-6681 for a written estimate.
How do you source the Boral material if it’s discontinued? We work to the spec, not the carton – matching water absorption, size tolerance, and grout compatibility, and telling you honestly when a perfect dye-lot match isn’t possible. We don’t stock parts; we source to your bathroom. Call (844) 343-6681 to talk through your options.
Who is Bradford Remodeling Co Los Angeles? We’re a Garrison Partners member (in the family since 2004), independently owned and held to The Garrison Standard – written price before work, background-checked uniformed technicians, live phone coverage 24/7, and the 365-Day Done Right Promise on every completed project. Call (844) 343-6681 for a free estimate.
Bathroom work is the kind of job where guessing gets expensive fast. If your Boral tile is cracking, your grout won’t stay put, or you’re not sure what’s under the surface, call Bradford Remodeling Co Los Angeles at (844) 343-6681 for a free, written estimate. A live person answers, day or night, and the price you get is the price you pay.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












