







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Driveway & Pavers: The Los Angeles Owner’s Guide
We install Blanco-compatible driveway and paver systems across Los Angeles, and a full paver driveway replacement here typically runs $8,260 to $21,240 installed, with concrete and asphalt alternatives landing lower. Paver and driveway work is scheduled, not same-day: we quote in writing, then book the crew once the scope and materials are locked. Most owners discover the problem in the same order, a section of pavers sitting a quarter inch proud of its neighbors after a dry stretch, then sand washing out at the joints during the first real rain, then a low spot near the garage apron where water pools instead of running to the street.
Which Blanco Models This Applies To

Blanco’s driveway and paver lines show up on Los Angeles properties in a handful of formats, and getting the match right matters more than the catalog photo suggests. Before we order anything, we confirm three things: the paver dimensions (most systems run a nominal 60mm, 70mm, or 80mm thickness), the joint width the original install used, and the color and finish family, because a dye-lot mismatch on a repair reads as a patch from the sidewalk.
Here’s the compatibility gotcha that catches owners on older Los Angeles driveways: Blanco paver thickness and joint spec have shifted across production runs, so an identical-looking paver from a current batch can sit proud of an eight-year-old installed field. Measure the actual installed thickness at a lifted edge, not the spec sheet, before committing to a replacement batch.
On the OEM-versus-aftermarket call, we’re direct. For a repair of a few pavers, a quality aftermarket equivalent that matches dimension and joint width is usually the smarter buy; the color will never be a perfect match to a weathered field, so saving the money and matching on dimension is the better trade. For a full driveway, we work through documented brand supply like Belgard and Unilock, so the spec sheet, manufacturer warranty, and our own written guarantee all reference the same product. We also service KraftMaid, Cambria, and Silestone for homeowners touching more than one surface. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Blanco.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Driveway & Pavers Is Failing
Paver and driveway systems fail slowly and then all at once. These are the symptoms we see on Los Angeles jobs, and what’s actually underneath them.
- Sand washing out of the joints after rain. The joint sand is migrating because the base isn’t holding it, usually from a substrate that was never compacted in lifts to spec. Refilling joints without fixing the base just buys you until the next rain.
- Pavers heaving or rocking underfoot. A rocking paver means the bedding layer has lost contact, often where water has been getting under the edge. On a Los Angeles driveway, the culprit is frequently a missing or failed edge restraint at the apron or the curb line.
- Low spots pooling water near the garage door. This is a slope problem, not a paver problem. Drainage should run away from the structure at roughly a 2% grade, and when it doesn’t, you get standing water against the slab and eventual freeze-free but still damaging saturation.
- Color fading and surface spalling. Southern California sun and the occasional hard freeze in the valleys both work on pavers. A degraded sealer, or one that was never applied, accelerates this, and thinning pigment on a specific section usually points to that area sitting in full afternoon sun.
- Cracked or chipped pavers along the drive lane. Repeated point loading from vehicle tires at a seam or a poor base transition will crack even a spec-correct paver. When cracks line up in a row, suspect the base, not the batch.
Replacement Cost & What’s Included

Installed pricing for Los Angeles, quoted as a written range before any work starts:
- Paver driveway installation: $8,260 to $21,240
- Concrete driveway installation: $5,310 to $14,160
- Asphalt driveway paving: $4,130 to $10,620
- Driveway replacement: $5,900 to $16,520
- Driveway sealing: $295 to $825
- Paver patio installation: $4,130 to $12,980
What moves the number: total square footage, substrate condition (a full excavation and re-compaction costs more than a resurface), the paver line and finish, edge restraints, and drainage corrections. Our price separates material from labor so you can see where the money goes. Every completed driveway carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check yourself, safely and usefully. Walk the driveway after a hose run and mark where water pools. Lift one edge paver and look at the sand underneath for washout. Check whether the edge restraint is intact at the curb and the garage apron. Photograph what you find; it makes the estimate faster.
Where DIY goes wrong: re-laying a field of pavers over a compromised base. A properly built paver driveway has an excavated, compacted substrate, a bedding layer, and edge restraint, and skipping any of those three means the new pavers fail the same way the old ones did, often within a season. Trenching, compacting, and setting slope to a 2% grade near a structure is heavy, physical work with real drainage consequences, not a weekend job. If the base is suspect, that’s the point to call. Call (844) 343-6681 and we’ll walk the driveway with you.
FAQs

A properly installed paver driveway typically holds 25 to 30 years or more in this climate, and the pavers usually outlast the base and joint sand underneath them. Los Angeles sun and dry stretches age the sealer faster than the pavers, so resealing every few years is what keeps the surface reading sharp.
Often yes, if the failure is localized, a handful of rocking or cracked pavers with intact edge restraint and a base that’s still holding. When washout spans a large section or water is pooling against the structure, a repair that doesn’t address the base will fail again. We’ll tell you honestly which side of that line your driveway is on, in writing.
A localized repair is often a single-day job. A full paver or concrete driveway replacement in Los Angeles usually runs several days to about a week depending on square footage, substrate work, and cure time. You get the schedule in the written scope before the crew starts.
We source through documented brand supply, including Belgard and Unilock for hardscape, so the material spec and manufacturer warranty are traceable. We match on measured installed thickness and joint width, not a catalog photo. Bradford Remodeling Co Los Angeles is an independent provider and is not affiliated with Blanco.
Get Your Free Estimate
Whether you’re chasing a single lifted paver or staring down a full driveway replacement in Los Angeles, the first step is the same: a written, line-item price before any work starts. A live person answers the phone 24/7, and our technicians have up to 22 years of experience. Call (844) 343-6681 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












