







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Belgard Construction
Bradford Remodeling Co Los Angeles provides independent Belgard construction service in Los Angeles: paver patios, paver driveways, driveway replacement, and retaining wall work built on base prep that holds up. What sets our Belgard work apart is where we put the attention. The paver is rarely the problem. The base, the edge restraint, and the drainage under it decide whether a Belgard field still looks right after ten years of sun and winter rain. We work with Belgard hardscape and masonry products every week, and our technicians have up to 22 years of experience. We’re an independent local contractor, not authorized, sponsored, or endorsed by Belgard. Call (844) 343-6681 for a written price before any work starts.
Why Trust Bradford Remodeling Co Los Angeles for Your Belgard Construction?

Belgard makes a deep catalog, and the lines behave differently. Mega-Arbel is a tumbled, large-format paver with a textured face; Catalina Grana is a modular field paver; Weston Stone and Anchor Highland Stone are segmental wall blocks that depend on geogrid and proper footing depth. Our crews know which of these products call for a thicker compacted base, where edge restraint matters most, and how polymeric joint sand should be installed so it doesn’t wash out in the first heavy rain. That is what keeps a Belgard installation warranty-safe.
We install to the manufacturer’s published guidance: the right aggregate depth, compaction in lifts, correct edge restraint, and joint sand specified for the application. Materials are documented at the spec stage, so nothing gets swapped mid-job. Every completed Belgard project carries the 365-Day Done Right Promise. If the work fails inside that window, we come back and correct it at no charge. A live person answers the phone 24/7. Specifications stay traceable and quality isn’t left to guesswork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Los Angeles
Most Belgard callbacks we see in Los Angeles trace to base and drainage, not the pavers themselves. Here are the five that come up most.
- Moss, algae, and efflorescence haze. Textured Belgard pavers in shaded or irrigated zones grow a green film and a chalky white bloom. It’s almost always a drainage and sealer issue, not a defective paver. Water sits in the joint field, the surface stays damp, and the salts migrate up.
- Polymeric sand washout and joint erosion. On Belgard paver driveways and patios, sand spills out after heavy rain where the base was under-compacted or the slope drains the wrong way. Joints open, pavers shift, and the surface starts to look tired long before it should.
- Rutting, lipping, and edge spread. In Mega-Arbel or Catalina Grana fields installed over thin or poorly drained aggregate base, pavers settle unevenly. The pavers are fine. The base failed, and that’s where the fix belongs.
- Bulging or leaning retaining walls. Weston Stone and Anchor Highland Stone walls lean when geogrid is missing, wall-footing depth is short, or weep paths are blocked. Water loads up behind the block and pushes it out.
- Low pavers against the house. A handful of units sit low at the threshold, trapping water against the structure. Usually the slope was never graded to run off, so the field drains toward the house instead of away.
Belgard Parts & Our Repair-vs-Replace Approach

Belgard pavers and wall units are matched to the existing color and profile, so repairs blend with the field instead of reading as a patch. Base, edge restraint, and polymeric joint sand are specified to the manufacturer’s published installation guidance. We source parts for each job rather than claiming local stock, and we tell you up front what has to be ordered and what can be reused. Old pavers in good condition are commonly salvaged.
The repair-versus-replace call is where honesty matters most. A paver field with a failed base gets pulled, re-graded, re-compacted, and re-installed. That’s a repair. A retaining wall with structural movement is different. Resetting a bulging Belgard wall without fixing the geogrid and footing just buys a few seasons. Rebuild is often the straight answer. Call (844) 343-6681 and we’ll tell you which one your wall actually needs.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the Belgard field or wall, check the slope and drainage path, probe the base, and look at the edge restraint. Then we tell you whether the fault is the surface or what’s under it.
- 2
Repair or install. Affected units come up, the aggregate base is re-graded and re-compacted in lifts to the depth the product calls for, and edge restraint is checked and reset. New Belgard units are matched to the field. Walls get geogrid and footing to spec where they were missing.
- 3
Test. We run water over the finished surface and confirm it moves away from the house. Joint sand is set and inspected, and the field is walked for lipping and spread.
- 4
Warranty. The site is cleaned, the scope is documented, and you get the written 365-Day Done Right Promise in your hand at close. If the work fails inside the year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Los Angeles
We service and install the Belgard lines that hold up to Los Angeles conditions. That covers Mega-Arbel, the tumbled large-format paver often used on driveways; Catalina Grana, a modular field paver for patios and walkways; and Weston Stone and Anchor Highland Stone segmental wall block for retaining walls and grade changes. We also handle base prep, edge restraint, polymeric joint sand, and wall footings and geogrid for those products. If your Belgard series isn’t listed, tell us the profile and we’ll confirm whether we can match it.
We Also Service These Brands
Bradford Remodeling Co Los Angeles isn’t a one-brand operation. Alongside Belgard hardscape work we install and service KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, backed by a documented roster that carries manufacturer specs and warranties. If a Belgard job turns into a broader outdoor or whole-home project, one crew runs it. One written price covers it.
FAQs – Belgard Construction Service in Los Angeles

Is Bradford Remodeling Co Los Angeles authorized by Belgard?
No. Bradford Remodeling Co Los Angeles is an independent Belgard service provider and is not authorized, sponsored, or endorsed by Belgard. We work with Belgard products every week and install to the manufacturer’s published guidance, but we are a separate local contractor. Call (844) 343-6681 with questions about your project.
Do you use genuine Belgard/OEM parts?
Yes. We specify genuine Belgard pavers and wall units to match the field, along with base, edge restraint, and polymeric joint sand to the manufacturer’s published installation guidance. Parts are sourced per job rather than claimed from local stock, and we tell you up front what’s being ordered. Call (844) 343-6681 for a written quote.
How long does Belgard service take?
A re-sand and joint repair can be a day. Pulling, re-grading, and re-installing a failed field takes several days, and a wall rebuild longer. A Belgard paver driveway of typical Los Angeles size usually runs about five to eight working days from start to finish, weather and material lead times aside. Call (844) 343-6681 and we’ll give you a written timeline with the price.
What Belgard models/series do you cover?
We cover Mega-Arbel and Catalina Grana pavers, and Weston Stone and Anchor Highland Stone retaining wall block, plus the base, restraint, and joint sand that hold them. If your series isn’t listed, share the profile and we’ll confirm matchability. Call (844) 343-6681 for a free estimate.
Will service void my Belgard warranty?
Not if the work is done to the manufacturer’s published installation guidance, which is how we build. Shortcut base prep and missing geogrid are what put a Belgard warranty at risk, not qualified repair. We document the scope so the work stays warranty-safe. Call (844) 343-6681 to talk through your installation.
How much does Belgard construction cost in Los Angeles?
Here are market ranges for the jobs we do most in Los Angeles:
| Service | Price Range |
|---|---|
| Paver Patio Installation | $4,130 – $12,980 |
| Paver Driveway Installation | $8,260 – $21,240 |
| Driveway Replacement | $5,900 – $16,520 |
Call (844) 343-6681 for an exact quote. Estimates are free, and every price is written before any work starts.
Book Your Belgard Service in Los Angeles, CA
Belgard paver and wall work in Los Angeles lives or dies on base and drainage. If your patio stays wet, your sand washes out, or your wall is leaning, call (844) 343-6681. You get a free estimate, a written price before work starts, and the 365-Day Done Right Promise when the job closes.
Written by the team at Bradford Remodeling Co Los Angeles.












