







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Los Angeles Owner’s Guide
Roof repair on a Barrette-outfitted home in Los Angeles runs $470 to $2,125 for most repairs, while a full roof replacement lands between $9,440 and $23,600 depending on material and square footage. We install and service Barrette roofing and the components that go with it, with written pricing before any work starts. Most owners find the problem the same way: a damp ceiling stain after the first winter rain, granules collecting in the gutter, or a ridge cap that lifts in a Santa Ana wind. Call (844) 343-6681 for a free estimate and a straight number.
Which Barrette Models This Applies To

Barrette makes exterior building products, and for roofs that means the accessory line more than the field shingle: ridge vent, hip and ridge caps, starter strip, underlayment, and the metal and composite trim pieces that finish a roof edge. Matching the right part starts with identifying your series, not guessing from a photo. Pull the original permit paperwork if you have it, because Los Angeles roof permits are pulled with a specific product line and profile listed. If the paper is gone, measure the exposed face of the cap or trim (most run 5 to 7 inches) and photograph the profile end-on so the tongue-and-groove or shiplap fit is visible.
Here is the OEM-versus-aftermarket decision most owners actually face. A genuine Barrette replacement is the only way to keep a manufacturer warranty intact if your roof is still inside its coverage window, and it guarantees the profile lines up with what’s already on the house. Quality aftermarket equivalents are a reasonable choice on a roof past its warranty or on a section being patched where color-batch differences would show anyway. Ask us to price both before you decide, and we’ll put each option in writing. For other exterior products, we also work with KraftMaid, Cambria, and Silestone on the interior side. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Barrette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Roofing Is Failing
- Granules in the gutters and at the downspouts. This means the asphalt mat under the surface has started to break down, and the exposed mat is now taking direct sun. In Los Angeles, the inland valleys run hotter and dry out the mat faster than the coastal side.
- Ridge cap lifting or curling at the peaks. Santa Ana winds push under a loose cap and peel it back. Once water gets behind the ridge vent, it tracks down the deck and shows up far from the actual leak.
- Ceiling stains that appear only after rain. A stain that shows up in one spot after a storm and dries flat points to a failed underlayment or a lifted cap, not a plumbing issue. The stain location rarely matches the entry point on the roof.
- Lifted or separated flashing at wall and skylight junctions. The sealant at these joints has a shorter life than the shingle. Re-caulking a failed flashing joint rarely holds more than a season.
- Soft or spongy decking when you walk on the roof. This means moisture has reached the sheathing and the substrate is losing structure. This is the point where a repair turns into a replacement decision.
The reality in this climate: UV exposure and heat cycling age a Los Angeles roof faster than rain does. We see Barrette-outfitted roofs in the Valley that have dried out and lost granules years before a similar roof closer to the coast. That heat-side lifespan gap is worth knowing before you decide whether to patch or replace.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

These are realistic installed ranges for Los Angeles, parts and labor together:
| Scope | Installed Price Range |
|---|---|
| Roof repair (spot, flashing, ridge cap) | $470 – $2,125 |
| Roof replacement (full) | $9,440 – $23,600 |
| Metal roof installation | $17,700 – $47,200 |
| Tile roof repair | $710 – $2,950 |
What moves the number: roof size, pitch, number of layers to tear off, whether decking needs replacement, and whether the part you need is a current Barrette profile or a discontinued one that has to be sourced. We give you a written price before any work starts, itemized by part and labor, so you can see exactly what the range is made of. Every completed job carries our 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
Roof work at height is the part that hurts people. A fall from a one-story roof with a ladder set wrong on a windy day sends homeowners to the ER every week, and a loose ridge cap can peel off in your hand and end up in the neighbor’s yard. We say this plainly: the inspection and the diagnosis are worth doing yourself from the ground with binoculars, and the install belongs to a person with fall protection and insurance.
What you can safely check: gutters for granule piles, the attic for daylight at the ridge, and ceiling stains after a rain. What we handle: getting on the roof, matching the part, and installing it so it holds. Call (844) 343-6681 and a live person answers, 24 hours a day.
FAQs

How long does a Barrette roofing component last in Los Angeles? Ridge caps and flashing usually last 15 to 25 years, but heat and UV in Los Angeles shorten that on the inland side. Granule loss and sealant failure show up first, and the joint sealant often fails well before the cap itself.
Can the part be repaired instead of replaced? Often yes. A single lifted cap or a failed flashing joint can be re-secured and resealed for a repair-level price. Call (844) 343-6681 for a free estimate, because if a patch will hold for years, we’ll tell you that instead of selling you a replacement.
How long does the swap take? A spot repair is typically a few hours. A section replacement or a full re-cap is a day to several days depending on size. We put the schedule in writing with the price.
How do you source the part? We order the matching Barrette profile or a documented quality equivalent through supply, with the part number on the work order. We don’t keep parts on a truck. That way you know exactly what’s going on the roof and can verify it against the warranty.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












