







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Driveway & Pavers: The Los Angeles Owner’s Guide
Barrette paver driveway work in Los Angeles runs $8,260 – $21,240 installed, depending on square footage, base prep, and edge restraint, and we’re the independent contractor Los Angeles homeowners call when a section has failed and the rest of the drive is still sound. We install and repair Barrette-compatible pavers, and we quote a written, fixed price before any work starts. Starting a paver job takes planning, not a same-day dispatch, so call us to line up the estimate and the schedule.
Owners usually find the failure the same way: a low spot that puddles after every rain, a paver that rocks underfoot, or a course near the garage apron that has heaved and started to spread. Sometimes it’s sand washing out of the joints and weeds pushing through where the bedding has given up. If any of that sounds familiar, you’re looking at a base or restraint problem more often than a tile problem, and that distinction changes what the repair costs.
Which Barrette Models This Applies To

Barrette covers more than driveways, and the product lines matter. The paver side includes Brussels Block, Holland Stone, and similar interlocking systems, while the driveway-fence line includes the Barrette Freedom and Barrette Elite aluminum fence series. Match the product to the job before you price anything: a paver driveway uses a different spec chain than an aluminum fence run. Pull a tape measure across the face of two or three intact units and note the exact dimensions, because paver thickness, chamfer (the bevel along the top edge), and the module footprint all need to match the existing field. If a paver has a stamp, blend, or series name on the bottom or the carton it shipped in, that’s the fastest path to an exact match. If it doesn’t, a few close-up photos of the surface texture, color blend, and edge profile usually tell us what we’re dealing with.
OEM versus aftermarket: Barrette pavers pop up in discontinued blends and limited-run colors, so a same-maker, same-series replacement isn’t always available for older drives. A quality color-matched paver from a comparable spec can work, but we tell you honestly whether the seam will be visible and where to place the replacement field so the mismatch reads as intentional rather than a patch. With the aluminum fence line, OEM posts, pickets, and brackets keep the measurement system and warranty intact; aftermarket pieces can compromise both.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Driveway & Pavers Is Failing
Pavers are tough, but the layers under them fail in predictable ways, especially in Los Angeles where clay-heavy soil and the occasional atmospheric river turn a dry base into a moving one. Here are the symptoms we see most:
- Sunken or uneven sections. The base (the compacted layer of gravel or crushed stone under the sand bedding) has settled or wasn’t compacted to full depth. One low spot spreads outward under traffic.
- Paver lifting or rocking underfoot. The sand bedding has washed out or migrated, usually from drainage that runs toward the driveway. Once the bed thins, the units rock and the joints open.
- Widening joints and washed-out sand. Sand loss means water has a path under the pavers. Left alone, that path undermines the whole field section by section.
- Heaving along the edge or against the garage apron. The edge restraint (the border that holds the pattern in place) has failed or the base near a fixed structure has nowhere to drain. Clay soil swells when wet and pushes up.
- Cracked, chipped, or spalled paver faces. A single broken unit can be swapped, but if breaks cluster, the base beneath that area is usually the culprit, not the stone itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Barrette paver driveway installation in Los Angeles typically runs $8,260 – $21,240. For comparison, concrete driveway installation sits around $5,310 – $14,160, and asphalt paving around $4,130 – $10,620. Paver patio installation, if you’re extending the surface, runs $4,130 – $12,980. Sealing a drive afterward runs $295 – $825.
What moves the range: square footage, how much existing material has to come out, base depth and soil conditions, edge restraint, and whether the field is a full replacement or a targeted section repair. The written price before work begins covers demolition and haul-off, base prep and compaction, bedding, the pavers, edge restraint, and joint sand. We give you line-item numbers, not a lump sum that grows at the door. Every completed paver job carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we return and correct it at no charge.
DIY or Call Us?
You can safely check the obvious things yourself: photograph the failed area, measure a few intact pavers, note where water pools, and confirm whether the joints are losing sand. That information makes the estimate faster and more accurate.
Where DIY goes wrong is under the surface. Lifting pavers by hand and re-setting them on fresh sand looks convincing for a month, then fails again because the base beneath it never got fixed. Rebuilding a base means cutting out a section, excavating to depth, compacting in lifts, and re-establishing restraint and drainage. Skip a step and you’ll be back to the same low spot next rainy season. If the drive slopes toward the house or the garage, drainage mistakes can push water where it shouldn’t go.
Call (844) 343-6681 and we’ll tell you whether your failing section is a repair or a replacement, and quote a written price either way. Estimates are free.
FAQs

Barrette pavers themselves routinely last 25 to 30 years or more, but the layers under them are what half the failures are about. In Los Angeles, the base life depends heavily on soil type and drainage; a properly compacted base with good restraint and drainage keeps the drive flat for decades, while a shallow or poorly drained base can start settling within a few years. Call (844) 343-6681 with photos and we’ll tell you which part of your drive is failing.
Often, yes. A localized sunken section, a few lifted pavers, or a failed edge restraint can usually be lifted, re-based, and reset with a color-matched paver, which costs far less than a full replacement. If the base failure runs across most of the drive or the drainage is wrong throughout, a section repair won’t hold and a full replacement makes more sense. We’ll check the extent before quoting. Call (844) 343-6681 for a free estimate.
A targeted repair of a small section typically takes a day or two; a full driveway replacement usually runs several days to about a week, depending on square footage, demolition, and drying time for the base. Weather and access both matter, so the written price includes a realistic schedule, not an optimistic one. Your first step is the free estimate, so call (844) 343-6681.
We identify the exact series, color blend, and dimensions from your paver or its carton, then source an OEM match where it’s still in production. If a blend is discontinued, we price a quality color-matched equivalent and tell you honestly how visible the seam will be. We don’t stock parts and we don’t carry pavers on a truck; every part is matched and ordered for your specific driveway. Bradford Remodeling Co Los Angeles is an independent service provider and is not affiliated with Barrette. Call (844) 343-6681 to start the free estimate.
Backed by The Garrison Standard, we put the price and the guarantee in writing before a single tool comes out. We also install and repair KraftMaid, Cambria, and Silestone products when your project reaches the interior. For Barrette driveway and paver work in Los Angeles, we’ll match your part correctly, price it in writing, and leave the site clean with a signed guarantee in your hand. Call (844) 343-6681 today for a free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












