







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Home Additions & ADU: The Los Angeles Owner’s Guide
We build Ameristar home additions and ADUs in Los Angeles, and the installed range runs $53,100 to $153,400 for an addition and $106,200 to $259,600 for a detached or attached ADU. We’re an independent contractor, not affiliated with Ameristar. Most owners don’t call us about a “part” at all – they call because a finished Ameristar addition or ADU unit has started to show its age in a specific way: a slipping foot at a load-bearing post, a wall plate that has pulled away from the slab, or a rough-in that was never extended for the new bathroom or kitchenette. Additions and ADUs fail at their connections, not their surfaces.
Which Ameristar Models This Applies To

Ameristar makes a range of addition and ADU packages, and the part that applies to your job depends entirely on the model line, the panel thickness, and how the addition ties into your existing house. For a panelized addition system, that’s the panel-to-sill and post-base connection hardware. For a modular ADU that was set on a foundation, it’s the anchor and tie-down schedule called out in the model’s structural sheet. We identify the right part from the data plate at the panel or module, the model and serial numbers, and a few field measurements – not from a photo of the damage.
Here’s the OEM-versus-aftermarket call we make on Ameristar work in Los Angeles: for structural connections (post bases, hold-downs, anchor bolts), we match the model’s spec sheet and don’t substitute. For finish and non-structural trim, a quality aftermarket equivalent is fine and often what’s already there. We don’t carry Ameristar parts as stock and we don’t claim to. When you need a specific OEM component, we source it against the model number – and we tell you up front whether that’s an order-and-wait item or something we can match today.
A note on the brand family: KraftMaid, Cambria, and Silestone are the cabinet and surface brands we also work with on finish scopes. Those are separate from Ameristar’s structural line and never interchangeable with it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Home Additions & ADU Is Failing
- A post base has slipped or corroded. Galvanized base hardware lifts off the concrete or shows rust bleed after our wet winters and marine air. That means the connection between the structure and its foundation is losing its hold.
- The perimeter wall plate has separated from the slab. You’ll see a hairline gap at the bottom of the wall or a crack running the length of the sill. It points to anchor or tie-down hardware that has backed out, which is a load-path problem, not a paint problem.
- Doors and windows in the addition bind or won’t latch. When the frame has racked, openings reveal it first. This usually traces back to a settling foundation connection pulling the structure out of square.
- Water staining at panel joints or the sill. A flashing or gasket at a panel-to-panel or panel-to-sill joint has failed. Left alone through a Los Angeles rainy season, that joint takes water into the framing.
- An ADU rough-in docket that was never finished. A bathroom or kitchenette in a converted or prefab unit shows capped or missing plumbing and electrical tie-ins. The rough-in was scoped but never extended.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Connection hardware and structural repair on an Ameristar addition or ADU in Los Angeles typically runs inside the lead range of $53,100 to $153,400 for addition work and $106,200 to $259,600 for ADU construction; isolated repair items run far less. The variables that push the number up: accessibility (an attached addition on a slope is a different job than a flat-rear-yard panel job), whether the foundation needs work before the hardware can be tied back down, and whether the ADU rough-in has to be opened up behind finish.
What we put in the written price, before any tool comes out:
- The parts, itemized by description with model-match confirmation
- Labor and site protection
- Any permit or inspection the scope triggers
- A line for anything we anticipate but can’t confirm until we open the assembly
We give a written price range in dollars on the page and in your quote, not a “call for pricing.” Every completed job carries the 365-Day Done Right Promise: if the work doesn’t hold within a full year, we come back and correct it at no charge. To schedule a free estimate, call (844) 343-6681.
DIY or Call Us?
Some checks are safe for an owner. Look at the base of the addition for rust bleed or gaps, look at the panel and sill joints for staining, look at the data plate on the ADU module and write down the model and serial numbers. Take photos of what you see and keep them.
The fix is where DIY goes wrong, and here’s the honest reason: connection hardware is what carries a load path from the structure to the foundation. Loosening an anchor, a hold-down, or a post base to “tighten it up” without the model’s structural sheet in hand can shift the load onto the wrong connection. That’s not a maintenance task; it’s a structural one, and it should be done by a trained professional. Background-checked, uniformed technicians handle the work, and a live person answers the phone around the clock. Call (844) 343-6681 and we’ll tell you what the check turns up before anyone quotes a repair.
FAQs

Galvanized structural hardware on a properly drained, properly flashed addition in Los Angeles should hold well past a decade – but marine air and our wet winters shorten that on exposed or poorly flashed connections. The failure we see most is corrosion that starts at a connection someone didn’t inspect, not a part that was wrong out of the box. Call (844) 343-6681 for a free inspection estimate.
Often yes, when it’s a single connection that has backed out or corroded and the surrounding structure is sound. We confirm by opening the assembly and comparing what we find against the Ameristar model’s structural sheet. We don’t replace a connection we can correct, and we don’t repair one we can’t verify. Estimates are free.
A single post-base or hold-down replacement is usually a one-day job once the part is in hand; sourcing a specific OEM component can add lead time that we’ll confirm before we schedule. Larger scopes where the foundation or the rough-in is involved run longer, and we tell you the schedule in writing when we quote. Call (844) 343-6681 to schedule the estimate.
We match against the model and serial number on the data plate plus field measurements, then order the OEM component for structural connections or specify a quality aftermarket equivalent for finish and non-structural trim. We do not keep Ameristar parts in stock or on a truck – we source to your model. The match is confirmed in writing before the work starts.
Say a piece of an Ameristar addition or ADU in Los Angeles has slipped, separated, or stopped holding, and you’d rather know the number than guess. We put a written price on the whole scope before a tool comes out, always. Call (844) 343-6681 for your free estimate.
Written by the team at Bradford Remodeling Co Los Angeles, serving Los Angeles and nearby areas.












